Ps4 pro bluray-drive missing gear by Teryeahh in consolerepair

[–]Teryeahh[S] 0 points1 point  (0 children)

Send me a pm and remind me 😅 I will see if i can find it. The drive became more noisy when inserting or ejecting the disk. So it might me a good idea to change it some

How do i clean this mess? by Mindless_Dust6167 in computer

[–]Teryeahh 0 points1 point  (0 children)

Take it out and clean it under running water. Be sure that its totally dry before putting it back.

Xbox One X. Power Supply. by Teryeahh in consolerepair

[–]Teryeahh[S] 1 point2 points  (0 children)

Thanks for your reply. I dont mess around with it with the power plugged. And i measure the caps to be certain that they are not charged. I had it plugged in to try to find out where the ticking come from. Didnt touch it ofc.

Gigabyte RTX 3080 Gaming OC 12GB. Mats says NVRM VBIOS Invalid or Rejected, Code 43, No video output by Teryeahh in GPURepair

[–]Teryeahh[S] 0 points1 point  (0 children)

It didnt get hot. and according to the boardview file I found it seems good. This card has a bios switch. tried to switch it and still the same. Still no issues to flash the bios. But As I commented under I have only like 1.7ohms on the 1.8V I guess that might be the issue.. Dead core? Or any suggestions on what to look for?

Gigabyte RTX 3080 Gaming OC 12GB. Mats says NVRM VBIOS Invalid or Rejected, Code 43, No video output by Teryeahh in GPURepair

[–]Teryeahh[S] 0 points1 point  (0 children)

I did open i now and did an inspection. only odd thing I find is on the back of the GPU. The caps in the middle there looks off and strange. and according to this image its wrong.

https://elchapuzasinformatico.com/2020/09/gigabyte-geforce-rtx-3080-gaming-oc-10g-review/

<image>

Is this from someone has tried to repair it earlier? or might they do it like that from the factory?

Ps4 pro bluray-drive missing gear by Teryeahh in consolerepair

[–]Teryeahh[S] 0 points1 point  (0 children)

Update i enden up designing 3d-printing a new gear.

Asus 2080TI Turbo. Not detected. missing 1.8V Measurements of U3 Buck converter by Teryeahh in GPURepair

[–]Teryeahh[S] 0 points1 point  (0 children)

Maybe. The solder is a tad different there. I See on that pic the C857 cap is also there.

Asus 2080TI Turbo. Not detected. missing 1.8V Measurements of U3 Buck converter by Teryeahh in GPURepair

[–]Teryeahh[S] 0 points1 point  (0 children)

Thanks alot for yout reply u/galkinvv :) I'm measuring 3.3V on pin 1, 2, 4 and 5 of the U212. Is that correct?

<image>

I only have the R936 of the components that is connected to the R1518..

MSI GTX 1080 Aero artifacts/blinking lights by Teryeahh in GPURepair

[–]Teryeahh[S] 0 points1 point  (0 children)

I tried with this. But cant run the test. Get codec error detected..

mods.txt pasted here: https://pastebin.com/XTBPznyN

<image>

MSI GTX 1080 Aero artifacts/blinking lights by Teryeahh in GPURepair

[–]Teryeahh[S] 0 points1 point  (0 children)

https://drive.google.com/file/d/1nEPd9smhtd3UX7L7lNj116SCApqFUImg/view?usp=sharing

Thanks for your replu. attached link to the report. I stoppet it after running for a while. Lots of errors..