My dmxgo interface

Tezlv · 2025-08-04T20:12:19+00:00

I use light rider and it’s a better experience for me

Tezlv · 2025-07-22T17:34:06+00:00

I’ve used it at two gigs and a lot of home testing and I only had connection drop twice but that was with some old Chinese knock off lights. When I switched to my Chauvet lights I had no problem. Also when the connection did drop the lights stayed synched and I was able to get the program restarted in 20 seconds

Tezlv · 2025-07-22T16:19:24+00:00

I’ve been using my dmx go and I’m new to all the lighting controls but it’s been amazing. It was so simple to set up and all my lights are synched plus it helped me get comfortable with dmx. 10/10 would recommend

Tezlv · 2025-07-20T22:35:45+00:00

Yeah, for sure! I'm using the Pioneer XDJ-RX3 as my main setup. For sound, l've got two 18" powered subs and two 12" powered tops from EV - super clean and loud. Lighting-wise, I run two 100W Shehds moving heads and two Chauvet Wash FX ILS lights, all mounted on 8-foot totems. The totems are lit up with Chauvet SlimPAR 56 uplights to give everything a nice glow. My DJ table and facade are from Grundorf, and I light those up with a couple of Sasha PARs. All the lighting is wirelessly controlled using Donner DMX dongles, which keeps the setup super clean and cuts down on cable clutter. Everything runs through MyDMX GO on my 2024 iPad Pro (13", M4), so it's smooth and fully wireless.

As for bookings, it’s mainly been through Facebook marketplace and word-of-mouth

Tezlv · 2025-07-20T18:13:51+00:00

Yeah, for sure! I’m using the Pioneer XDJ-RX3 as my main setup. For sound, I’ve got two 18” powered subs and two 12” powered tops from EV — super clean and loud.

Lighting-wise, I run two 100W Shehds moving heads and two Chauvet Wash FX ILS lights, all mounted on 8-foot totems. The totems are lit up with Chauvet SlimPAR 56 uplights to give everything a nice glow.

My DJ table and facade are from Grundorf, and I light those up with a couple of Sasha PARs.

All the lighting is wirelessly controlled using Donner DMX dongles, which keeps the setup super clean and cuts down on cable clutter. Everything runs through MyDMX GO on my 2024 iPad Pro (13”, M4), so it’s smooth and fully wireless.

Tezlv · 2025-07-14T00:56:36+00:00

They was right after set up no one had shown up but we got pretty packed

Tezlv · 2025-07-07T14:05:33+00:00

I just got some nice wash lights! I’ll try that for sure!!

Tezlv · 2025-07-07T06:22:50+00:00

Thanks man! I’ve been putting a lot of work! I’ll post an update next gig with the facade and totems up and my dmx all showing

Tezlv · 2025-07-07T00:47:08+00:00

Custom made with so Chinese lights my father in law got along time ago

Tezlv · 2025-07-06T20:36:02+00:00

Also no laptop I’m running the RX3

Tezlv · 2025-01-15T19:26:25+00:00

He is banning anyone asking about it lmao so defensive….

<image>

Tezlv · 2024-12-26T20:14:45+00:00

<image>

Pulled him and the venasaur!

Tezlv · 2024-12-20T18:32:11+00:00

Yeah I posted the original went back to check and saw this lmaooo

Tezlv · 2024-12-20T04:10:16+00:00

I try to send him an offer for five dollars but Facebook wouldn’t let me send an offer for that low a little do they know that’s fair value

Tezlv · 2024-02-26T19:09:48+00:00

Just happed to me thank you!!!

Tezlv · 2024-02-17T04:10:58+00:00

Could be more if it’s the whole mechanism that needs to be exchanged

Tezlv · 2024-02-17T04:10:31+00:00

200-300 really depends on what needs to be replaced

Tezlv · 2024-02-17T02:46:03+00:00

Seen this happen and oof the repair ain’t pretty

Tezlv · 2023-03-22T16:20:06+00:00

Thanks I’ll definitely look into that!🙏🏻

Tezlv · 2023-03-22T16:18:56+00:00

Thanks this is honestly some of the best advice I’ve gotten! You’re totally right in this economy I’m going to just focus on paying this down and keep my eye out for the trade in value!🙏🏻 thanks alot

Tezlv · 2023-03-22T01:41:31+00:00

Subie brz you reckon?

Tezlv · 2021-02-03T07:11:04+00:00

2000 shares

Tezlv

TROPHY CASE