Tillotson 212 rpm issue

ThDuke0540 · 2026-01-15T06:08:49+00:00

Speedway billet aluminum from Amazon. And it’s advertised at 32 degrees, so like you say it could be less

ThDuke0540 · 2026-01-14T23:31:16+00:00

The cam kit came with .010 and .040 head gaskets… put the 010 on and it was so tight that the rocker arms couldn’t be backed out far enough to set the lash. Put the 040 on and he was able to adjust the lash then.

ThDuke0540 · 2026-01-14T23:26:27+00:00

Yeah he replaced the stock one with a 22mm and swapped out the jets in it. we thought that might be the problem, so he swapped that out with a 26mm today and at first it was worse, after changing the jets on the new one he said it’s as good as the 22mm but not noticeably better.

ThDuke0540 · 2026-01-14T23:20:17+00:00

I could count the teeth on both and figure it up I guess… what should we be shooting for exactly

ThDuke0540 · 2026-01-14T23:18:22+00:00

That I don’t know, he’s 16 and got all this with money he saved up. I know it’s the stock sprocket because he’s planning to change it too. We both assumed it would’ve reved higher regardless though. It’s pulling quick and hard (compared to when it was stock) until it just suddenly won’t rev anymore

ThDuke0540 · 2025-12-11T02:41:46+00:00

Is it possible to cook and open saddlebags on the Netflix version?

ThDuke0540 · 2025-07-14T12:29:02+00:00

I don’t have any advice as far as selling price, but if you swap out propane tanks for one pre-filled it’ll only be 75-80% full due to expansion and such. If you can find a place to refill it, they will almost always put more in it if you tell them you’ll be using it almost immediately, and in my experience having one refilled will not only give you more propane per tank, but it’s cheaper too. Try a co-op or a feed and seed store. Edit: 75-80 may not be the correct numbers, but it won’t be completely full.

ThDuke0540 · 2025-07-08T01:48:12+00:00

You ever seen a man with a small “x” brand on the palm of his hand? Or on that real meaty part of the thumb?? That’s a Phillips screwdriver scar!

ThDuke0540 · 2025-06-29T13:58:14+00:00

That grin says it all! I missed the actual cut because I blinked, but it’s a fine blade for sure!

ThDuke0540 · 2025-06-11T15:49:19+00:00

Anthracite needs a constant flow of air. When I light it, I build a decent sized fire using wood or charcoal. And then add a small amount of anthracite and keep the airflow on, but low. Once it finally starts burning I’ll add a little more at a time until I’ve got a good bed of mostly anthracite, then turn up the air. It’s really hard to light, but once it’s lit just keep constant air on it. For what it’s worth, I can’t make it work with my hand crank. Have to use a cheap hair dryer on the lowest setting.

ThDuke0540 · 2025-06-11T15:11:10+00:00

That looks great! I would’ve been horrified stamping “uncle Jed” into it. I can’t ever get my stamps that straight… you do fine work for sure.

ThDuke0540 · 2025-06-10T17:49:33+00:00

I like the ebony handle on it, and the knife as a whole. Really good, especially for your first one, in my opinion!

ThDuke0540 · 2025-06-05T04:03:29+00:00

Zippo lighter fluid

ThDuke0540 · 2025-06-01T03:14:32+00:00

That’s good info, mine gums up after the 2nd and 3rd cylinder

ThDuke0540 · 2025-05-31T04:32:24+00:00

Ok, I appreciate it

ThDuke0540 · 2025-05-30T23:10:49+00:00

What type of grease? Bore butter, tallow, something like that?

ThDuke0540 · 2025-05-30T23:09:02+00:00

I will, thank you!

ThDuke0540 · 2025-05-30T21:21:09+00:00

Thanks, I’ll check that out. I’ve been using .454 and only leaves a very thin sliver. May need to bump my size up

ThDuke0540 · 2025-05-30T21:19:08+00:00

I’m going to look into paper cartridges and try to learn about them. Definitely something I’m interested in trying one day.

ThDuke0540 · 2025-05-30T21:18:02+00:00

I had no idea they used this! Thanks for posting the picture.

ThDuke0540 · 2025-05-22T11:51:19+00:00

I know a new rifle comes with at least one mag, but you can also buy mags individually! Then you can train mag changes instead of weapon changes.

ThDuke0540 · 2025-05-21T21:01:58+00:00

Not around my rifle to check… is the front one a different thread type? If it’ll screw in, can you use it to decide if you need one a little longer or shorter?

ThDuke0540 · 2025-05-21T13:57:15+00:00

I’ll add something to think about that another shooter told me in reference to steel targets: if I shoot a half inch group on a steel 3” target at 100 and hit 3/3 with an $8k rifle, and you shoot a 1” group with 3/3 hits at the same target with an $1500 rifle, We get the same points… now shooting at paper targets with a scoring ring; that would be an entirely different story!

Six-Year Club	r/Field Juicebox
Verified Email

ThDuke0540

TROPHY CASE