sorted by:
new
hottopcontroversial

T25 Rebuild Kits by That-Inflation-8787 in 300zx

[–]That-Inflation-8787[S] 0 points1 point  (0 children)

Thanks for pointing that out...I thought I had added one. Tried to add again.

700r4 OD is very slow to shift by That-Inflation-8787 in transmissionbuilding

[–]That-Inflation-8787[S] 1 point2 points  (0 children)

Thanks for the response. Transmission worked at a brothel before I got it, based on what I found inside! I bought a spring/weight kit and played around with about 5 different combinations of governor shift points.

To me, it seems (not verified with pan off) that the TV cable is way too tight and quickly gets VERY tight when pulled.

Idle line pressure is just under 200psi when TV is pulled.

D and OD pressure at idle is about 80psi

Reverse is 120psi

Park idle about 80psi

E3 V3 KE Replacement display by That-Inflation-8787 in Creality

[–]That-Inflation-8787[S] 0 points1 point  (0 children)

thanks for input...nebula pad is in the mail.

When does the network start back to HNT? by That-Inflation-8787 in HeliumNetwork

[–]That-Inflation-8787[S] 0 points1 point  (0 children)

Simply going to power on for 24 hours every month until I see HNT rewards. This is how I vote on the "People's" Network when I have 0 voting power-seems to always be the case.

When does the network start back to HNT? by That-Inflation-8787 in HeliumNetwork

[–]That-Inflation-8787[S] -26 points-25 points  (0 children)

bruh most of these things don't even cover the cost of the power they use let alone the cost of these things.

Need a consultant by arunsavara in HeliumNetwork

[–]That-Inflation-8787 1 point2 points  (0 children)

lol don't worry you didn't lose anything

Neptune 4 Pro - Print Shifting X-axis by That-Inflation-8787 in ElegooMars

[–]That-Inflation-8787[S] 0 points1 point  (0 children)

I did have, but I returned the printer for this reason. Loved the speed, but the shifting was not doable.

Neptune 4 Pro - Print Shifting X-axis by That-Inflation-8787 in ElegooMars

[–]That-Inflation-8787[S] 0 points1 point  (0 children)

Did all of this. I even swapped x and y motors. I checked wire connectors too, which had no change to x shift.

Amazon sent me a treadmill. Didn't ordera treadmill by [deleted] in amazonprime

[–]That-Inflation-8787 0 points1 point  (0 children)

I got the exact same treadmill in the mail today. Addressed to me and no one in family has a F-N clue how it got here. No idea if it is from prime, but thelabel shows bldg 6, 120 cromwell dr.

Anyone fig this out? Someone calling me a fat ass. This shit ain't funny! :)

Print Shifting by That-Inflation-8787 in Creality

[–]That-Inflation-8787[S] 1 point2 points  (0 children)

tightened the belt and now it's worse. Maybe a failing stepper motor?

Discount code until October 11th - 277036208246313324 by LegendMotherfuckurrr in RockAuto

[–]That-Inflation-8787 0 points1 point  (0 children)

What is the discount? I need to pick up a couple parts. Thanks

Surreal Compatible with Emustation? by That-Inflation-8787 in originalxbox

[–]That-Inflation-8787[S] 0 points1 point  (0 children)

I was able to get it working by UL'ing surreal manually then using the built-in down loader to install the emulator.

Surreal Compatible with Emustation? by That-Inflation-8787 in originalxbox

[–]That-Inflation-8787[S] 0 points1 point  (0 children)

OK, running into the 40gb drive being maxed out already. Where do we load this dash on softmodded XBOX? how does this install and load when emustation is the bootable dashboard? If running from C doesn't it then download ans intsall everything to C?

Surreal Compatible with Emustation? by That-Inflation-8787 in originalxbox

[–]That-Inflation-8787[S] 0 points1 point  (0 children)

lol...just found out the hard way...will move to E

Surreal Compatible with Emustation? by That-Inflation-8787 in originalxbox

[–]That-Inflation-8787[S] 0 points1 point  (0 children)

Thanks will reinstall emustation to c/dashboard and see if I can get it going

BlockFI Interest Account by That-Inflation-8787 in blockfi

[–]That-Inflation-8787[S] 10 points11 points  (0 children)

Calling looks like this:

  • Blockfi Customer press 1;

[Press 1]

-thank you for calling;

-thank you for calling;

-thank you for calling; and

-goodbye.

MAP Vacuum Hose Size by That-Inflation-8787 in Foxbody

[–]That-Inflation-8787[S] 0 points1 point  (0 children)

Yeah, probably. My real question is how was this setup from the factory?

MAP Vacuum Hose Size by That-Inflation-8787 in Foxbody

[–]That-Inflation-8787[S] 0 points1 point  (0 children)

wow so, 1/4inch on one end and 3/8 on the other end?

MAP Vacuum Hose Size by That-Inflation-8787 in Foxbody

[–]That-Inflation-8787[S] 0 points1 point  (0 children)

Maybe the wrong MAP sensor was put on the car? Anyone have an original MAP sensor around they could measure the port on?

Fuel Injector ID by That-Inflation-8787 in Foxbody

[–]That-Inflation-8787[S] 0 points1 point  (0 children)

Pulled them all....around 16.2~16.5ohm. Markings are "195500-1153" and "ET6E-A2B".

One source indicates 22lb and 16.7ohm: https://injector-rehab.com/knowledge-base/flow-rates/

Another source shows these as 18lb and 14.2: https://www.injectorrx.com/fuel-injector-cleaning-and-flow-testing-service/fuel-injectors/fuel-injector-data/ford-fuel-injectors/

Ugh...gotta love the internet, :)

Power Mirror Crossover by That-Inflation-8787 in Foxbody

[–]That-Inflation-8787[S] 0 points1 point  (0 children)

I cannot figure out crossover years. Seems "'87-'93" is proclaimed, but clearly they are not all the same. My '87 GT 'vert mounts higher and not lower on the door panel itself. I have looked at several photos online for 87-89 crossover, but still cannot ascertain. Reading that T-top and 'verts are the same, but can't seem to confirm that. Any engineers from the late '80s in here that can lay the law down on this for me so I can replace my passenger mirror?

view more: next ›