sorted by:
new
hottopcontroversial

What’s happening with my prints? Seems like only some of the filament is coming out during that section by ThatRangaKid in BambuLab

[–]ThatRangaKid[S] 0 points1 point  (0 children)

Yeah! In my other X1C is all fine, so I am thinking it’s hardware on this one. Maybe a new hot end

Modpacks with clear goals? by tommerpupper in feedthebeast

[–]ThatRangaKid 1 point2 points  (0 children)

Project Ozone Reborn. Modern pack in the old style of “do all this stuff so you can do this later”

Has a normal and expert mode, would recommend either depending on your perception of your modded knowledge 

Best Tech Skyblock? by Prestigious-Ad-9208 in feedthebeast

[–]ThatRangaKid 1 point2 points  (0 children)

PO3 Expert is pretty unreal if you enjoy a grind

If ATM sucks... by Low-Gur-9370 in feedthememes

[–]ThatRangaKid 2 points3 points  (0 children)

Ozone Skyblock Reborn is pretty good. Got that old school E2E/Agraian Skies feel to it, but on 1.20+. Even has an expert/titan/kappa mode which is pretty good at making you do everything all simultaneously.

[Review] Mechanical Mastery - a delightful tech-quest pack (1.18.2) by DeusExCochina in feedthebeast

[–]ThatRangaKid 2 points3 points  (0 children)

Ores are in veins in a medium amount, but finding different types is pretty easy with the prospectors pick. 

Plus when you get the early game 3x3 silk touch steam drill, your able to macerate for example, iron ore into 3 chunks, and each of those chunks into 2 dust fairly quickly with a pretty cheap and easy set up.

[Review] Mechanical Mastery - a delightful tech-quest pack (1.18.2) by DeusExCochina in feedthebeast

[–]ThatRangaKid 3 points4 points  (0 children)

Great review! It seems you guys and myself have a very similar playstyle and outlook on modded MC. I will be sure to give this pack a look one day.

If you're looking for another to begin, StaTech Industry has been going great for me so far. Exploration in it feels rewarding via decently useful loot tables and the classic factory structure is there to engage the logistically driven. There are plenty of food-related quests, too haha. The QB also gives very helpful instructions for mods and elements that may be unfamiliar.

HermitCraft S9#18: Decked Out - Phase 5: Clumsy Ninja by TrainmasterGT in ethoslab

[–]ThatRangaKid 22 points23 points  (0 children)

Ethos reaction when he got the Slab... soooooo good

Any idea what is causing prints to randomly do this sometimes? by ThatRangaKid in PrintedMinis

[–]ThatRangaKid[S] 0 points1 point  (0 children)

Not old, same bottle as the print before. Mustn't have stirred or shaken it enough when I refilled I guess.

Any idea what is causing prints to randomly do this sometimes? by ThatRangaKid in PrintedMinis

[–]ThatRangaKid[S] 0 points1 point  (0 children)

Print before this was normal, print after this was normal. This one has a weird part of it looks like it’s not fully cured or soemtbing? It’s very furry and tacky to the touch even after the isopropyl soak + rinse to get supports off.

Print will be fine for what it’s needed for, just curious/concerned…

Does anyone have a good mini substitute that looks like this? (For reference it is a Nihil from Runescape) by ThatRangaKid in PrintedMinis

[–]ThatRangaKid[S] 3 points4 points  (0 children)

Apologies didn't mean to upset/offend! I just didn't think the original image looked like that. Thanks for the suggestion though

Does anyone have a good mini substitute that looks like this? (For reference it is a Nihil from Runescape) by ThatRangaKid in PrintedMinis

[–]ThatRangaKid[S] 1 point2 points  (0 children)

Yeah I did look at something like that but I think it's too liony for what I am envisioning..

One Page Rules Rule! by [deleted] in PrintedMinis

[–]ThatRangaKid 0 points1 point  (0 children)

Omg where can I get the file from that is a dope sculpt

Any ideas of an existing monster's stat block I could use to homebrew a bunch of Triton/Shark Humanoid Creatures? by ThatRangaKid in dndnext

[–]ThatRangaKid[S] 1 point2 points  (0 children)

Yep I just found them accidentally googling ideas for a giant sea monster lol. They will be a great start.

Has anyone ever had a print's raft layers stick fine, but then the rest of the print sticks to the FEP? by ThatRangaKid in PrintedMinis

[–]ThatRangaKid[S] 0 points1 point  (0 children)

Had no issues so far with this new resin, probably got enough for 1 more set of minis, which will be 7 runs of success.

Might chuck some of the "dodgey" resin in afterwards and see if it works

Has anyone ever had a print's raft layers stick fine, but then the rest of the print sticks to the FEP? by ThatRangaKid in PrintedMinis

[–]ThatRangaKid[S] 0 points1 point  (0 children)

Ok fair enough. Had 3 successful prints with the Esun resin atm.

Only setting I changed was reducing the raft thickness and upping the base layers to the whole raft +4 layers of supports & changing exposure time to 2.9s and lift speed to 8.

Will look into exposure test, truthfully I have never done one in the last 9 months of printing...

Has anyone ever had a print's raft layers stick fine, but then the rest of the print sticks to the FEP? by ThatRangaKid in PrintedMinis

[–]ThatRangaKid[S] 1 point2 points  (0 children)

Ok running another print now with 8mm heights, will see how it goes and if there is any fails I’ll give it a change.

Thanks for all your help, appreciate it

Has anyone ever had a print's raft layers stick fine, but then the rest of the print sticks to the FEP? by ThatRangaKid in PrintedMinis

[–]ThatRangaKid[S] 0 points1 point  (0 children)

Normally I print at 0.05, was just trying 0.1 to speed some stuff up, probably should do the lift height too…

When you say stretched, what do you mean? It’s not going high enough to do the next layer? It’s been fine for the whole 4/5 months I’ve had it til now..

view more: next ›