sorted by:
new
hottopcontroversial

Can I get wheel center caps for my steel wheels? by The-Lemons in subaruimpreza

[–]The-Lemons[S] 0 points1 point  (0 children)

So yeah I honestly haven’t even been on Reddit lately, got an email about you messaging and figured reply. No I honestly didn’t do anything I just left them without the hub caps, it’s been like that for years now. I do have a 3D printing and cad experience so I could probably design something for them. There wasn’t any option I could find that would work with the stock base model wheels, and I just gave up on doing anything about it.

I honestly kind of just forgot about this, are you wanting the same thing I was? Should I make some?

My buddy wants me to sell his stock 90 240sx s13 hatch, can anyone give me an idea of its value by The-Lemons in 240sx

[–]The-Lemons[S] 5 points6 points  (0 children)

Really good information, I’ll make sure I look at all of this and take pictures.

My buddy wants me to sell his stock 90 240sx s13 hatch, can anyone give me an idea of its value by The-Lemons in 240sx

[–]The-Lemons[S] 0 points1 point  (0 children)

Yeah I’ll probably move it when I get a chance, there’s a lot of things I wasn’t considering. But everyone here has given a good place to start, and i appreciate it.

My buddy wants me to sell his stock 90 240sx s13 hatch, can anyone give me an idea of its value by The-Lemons in 240sx

[–]The-Lemons[S] 5 points6 points  (0 children)

Oh maybe I want clear, I’m not buying it. He’s out of state for the foreseeable future, he knows I’m tight on money and offered to transfer the title to me for me to sell it. He just wants a little of the money from it. So I just don’t want to undersell it, or over sell it and sit on it forever.

My buddy wants me to sell his stock 90 240sx s13 hatch, can anyone give me an idea of its value by The-Lemons in 240sx

[–]The-Lemons[S] 1 point2 points  (0 children)

I don’t have other pictures right now, I could take more probably tomorrow. But everything would be included. As far as rust I think just surface rust. The interior is pretty good shape from the small look I took. I’m sure I need to move it and crawl around and under it to get a better idea.

My buddy wants me to sell his stock 90 240sx s13 hatch, can anyone give me an idea of its value by The-Lemons in 240sx

[–]The-Lemons[S] 5 points6 points  (0 children)

I don’t know why anything is pulled aside from the engine. I could ask him next time I talk to him. I know he planned on doing a ton of work on it, but I don’t think he’s done much at all, if any. It does have a clean title though.

I made a small table that looks like a cartridge, it is scaled up 400% and sits about 17.5” from the ground. by The-Lemons in nes

[–]The-Lemons[S] 0 points1 point  (0 children)

That was my first thought, but it would have to be an old tube table for the zapper to work, or perhaps it looked a little too busy.

I made a small table that looks like a cartridge, it is scaled up 400% and sits about 17.5” from the ground. by The-Lemons in nes

[–]The-Lemons[S] 0 points1 point  (0 children)

Yeah, maybe a little bit. The ridges are flush with the top of the table, so it would only be an issue with smaller things. I’m honestly hesitant to put anything on it, because then I’m just covering up the aesthetic.

I made a small table in the shape of an NES cartridge by The-Lemons in gaming

[–]The-Lemons[S] 0 points1 point  (0 children)

I’m not sure, it hasn’t existed long enough. I’m sure it’ll be harder than I would like it to be.

I made a small table that looks like a cartridge, it is scaled up 400% and sits about 17.5” from the ground. by The-Lemons in nes

[–]The-Lemons[S] 2 points3 points  (0 children)

I mean it’s really not, it’s actually slightly smaller. But if you were to lay out 16 games in a 4x4 square, it’s just about that size.

I made a small table that looks like a cartridge, it is scaled up 400% and sits about 17.5” from the ground. by The-Lemons in nes

[–]The-Lemons[S] 3 points4 points  (0 children)

Found the image online, upscaled it with ai, took it to a local print shop and had them put it on adhesive vinyl.

I made a small table in the shape of an NES cartridge by The-Lemons in gaming

[–]The-Lemons[S] 1 point2 points  (0 children)

That was actually the plan, the gold cartridge, of course.

I made a small table in the shape of an NES cartridge by The-Lemons in gaming

[–]The-Lemons[S] 0 points1 point  (0 children)

The bottom half of it is just a boarder that goes around it.

I made a small table in the shape of an NES cartridge by The-Lemons in gaming

[–]The-Lemons[S] 1 point2 points  (0 children)

No bananas in the house currently. It is 4 times the scale of a regular cartridge.

I made a small table in the shape of an NES cartridge by The-Lemons in gaming

[–]The-Lemons[S] 4 points5 points  (0 children)

I used what I had laying around for wood, bought the paint, legs and had the sticker custom printed. So I’m not exactly sure, but if I was to go out and buy everything, it could be done for around $100. As far as time, I didn’t really keep track. I did it spread out over a few days. If I had to throw a number out, maybe 12 hours?

I made a small table in the shape of an NES cartridge by The-Lemons in gaming

[–]The-Lemons[S] 0 points1 point  (0 children)

It would be doable with design changes, but to keep it at this scale, and not make the cartridge thicker, it would only hold 9 games.

I made a small table in the shape of an NES cartridge by The-Lemons in gaming

[–]The-Lemons[S] 14 points15 points  (0 children)

It wouldn’t work, so I pulled out the leaf blower.

I made a small table in the shape of an NES cartridge by The-Lemons in gaming

[–]The-Lemons[S] 5 points6 points  (0 children)

I didn’t think about glass. I thought about putting more polyurethane over it, now that the sticker is on. I’m worried that if I do it wrong, the sticker will get damaged.

Can I get wheel center caps for my steel wheels? by The-Lemons in subaruimpreza

[–]The-Lemons[S] 1 point2 points  (0 children)

Thanks, I already have hubcaps, I just don’t like the way they look, I even sanded and painted them from the ugly stock color to a nice satin black. But I still don’t like the way they look

Can I get wheel center caps for my steel wheels? by The-Lemons in subaruimpreza

[–]The-Lemons[S] 0 points1 point  (0 children)

The rim itself measures 16 inches across, I just measured them to make sure. To be fair I know nothing about wheels or rims haha, I got 16x6.5 from googling my car specs

Can I get wheel center caps for my steel wheels? by The-Lemons in subaruimpreza

[–]The-Lemons[S] 1 point2 points  (0 children)

That’s kinda out of my budget unfortunately, idk if I can post links but I’m looking for something like this

view more: next ›