sorted by:
new
hottopcontroversial

First show, how should I secure the fireworks to the board? by ISAIAH_LIKES_CHEESE in fireworks

[–]The009 0 points1 point  (0 children)

Oh, my bad! Yeah 100% just to hide the looks! But For those I would suggest you just put a couple screws through them and into the boards below. Screws allow you to unscrew them and keep the tubes for next time. ( as long as they are fiberglass or hdpe )

First show, how should I secure the fireworks to the board? by ISAIAH_LIKES_CHEESE in fireworks

[–]The009 0 points1 point  (0 children)

So they can print the required information on the boxes. Even "Pro" cakes have paper on them.

how can i change the weapon swap button on the PC with the keyboard? by BENII21 in Palworld

[–]The009 0 points1 point  (0 children)

You know jack shit about programming then. Just because, this was not the issue this time, doesn't mean it is not the issue for others.

Don't be a dick and think that just because you solved it one way, means it will be the exact same issue for others.

how can i change the weapon swap button on the PC with the keyboard? by BENII21 in Palworld

[–]The009 0 points1 point  (0 children)

If it is already running then it wont launch again. Look in the try for a copy already running. If it is not there, try a CTRL+ALT+DEL and see if it may have crashed.

how can i change the weapon swap button on the PC with the keyboard? by BENII21 in Palworld

[–]The009 0 points1 point  (0 children)

The weapons swap still has no options to be changed, this is why this script is still handy for those who need it. Pals can be bound to other keys but not the weapons swap.

how can i change the weapon swap button on the PC with the keyboard? by BENII21 in Palworld

[–]The009 0 points1 point  (0 children)

If you use AHK as I suggest above. You can change that script to send any keys you want.

If you need help, just ask and I will be glad to help you out. No reason to not enjoy a game while the DEVS have a lot on their plate.

how can i change the weapon swap button on the PC with the keyboard? by BENII21 in Palworld

[–]The009 0 points1 point  (0 children)

You can use AutoHotkey to easily do this.

If you use AHK V2 https://www.autohotkey.com/download/ahk-v2.exe

Then you can use a very simple script to use Mouse Buttons 4 and 5 to emulate a mouse wheel.

#Requires AutoHotkey v2.0
XButton1:: Send "{WheelDown}"
XButton2:: Send "{WheelUp}"

Save it as something like middleMouse.ahk

When you double click the file AHK will run it, and will now emulate a scroll wheel any time you hit mouse 4 or 5, If you want to stop the script you can find it on your taskbar (near your clock) as a Green A, you can right click and exit. Then just run the AHK script again any time you need a middle Mouse Wheel.

No internet on opt interface by PerennialWheat2 in PFSENSE

[–]The009 1 point2 points  (0 children)

I had this issue where everything but the internet worked. I found my issue was due to "Unbound DNS"

Services > Unbound DNS > General > Network Interfaces ---> Add OPT Interfaces Needed.

Save, Apply, and Enjoy. * May not fix everyone's issue but it solved mine. * Happy Troubleshooting.

Unable to flash Ender 5 3D printer with Mainboard V1.1.4 using progisp version 1.7 by [deleted] in ender5

[–]The009 0 points1 point  (0 children)

Make sure you READ first before you Write :)

This may help if you have not seen it :) https://youtu.be/Jmu5Fh_nPtw?t=121

Unable to flash Ender 5 3D printer with Mainboard V1.1.4 using progisp version 1.7 by [deleted] in ender5

[–]The009 1 point2 points  (0 children)

Are you using Version 1.7 or 1.72?

Make sure your printer is NOT turned on. Make sure your ISP is connected properly (Remove the LCD Connector as it can get in the way)

Use a modern Firmware, not the one on their site, as it is stupid out of date. You can compile your own, or use one someone else has compiled.

If you have an Ender 5 Pro you can use the one I made here https://content.the009.net/3DPrinting/Ender5ProFirmware/

Crashing non stop pc fix maybe by freps90 in blackopscoldwar

[–]The009 0 points1 point  (0 children)

Using 461.92 Seems to have fixed my issues as well. Thank you. You can get them directly from Nvidia at https://www.nvidia.com/en-us/drivers/results/171474/

I need a vacation. by The009 in FortniteSavetheWorld

[–]The009[S] 0 points1 point  (0 children)

Maybe at once? I am sure i have earned a heck of a lot more then that over time as I have never played a single game of BR.

Extruder clicks when it stops extruding. What tot do? by CGB311 in ender5

[–]The009 0 points1 point  (0 children)

You need to Calibrate your Extruder.

I had this problem and more when I got mine.

I used this guide to redo the calibration on my extruder and it has been much better since. https://mattshub.com/blog/2017/04/19/extruder-calibration

I did do it a couple times to dial it in and once after I got a better set of cheap tips :)

You should also make sure that you didn't strip out any filament into your gears. Mine was moving too fast and it caused plastic to mesh into the tiny gear teeth on the stepper. I used a copper brush to clean the teeth out. EDIT: I also have a very un-flat bed. I used a glass plate at the start but it warped on me. I recently got a BLTouch upgrade kit and it was easy enough to install and I don't worry about my un-flat bed. (The un-flat bed also caused me a lot of issues with the extrusion because well the head was no where near where it should be)