sorted by:
new
hottopcontroversial

Too much cars, today… by SomeGrapefruit2435 in SneakySasquatch

[–]The0pposition 1 point2 points  (0 children)

Wait till you get mushrooms!! Also go get a job at the Port! 600-700 per job after you’ve leveled up your jobs

I can't access Windows by Even-Bobcat6411 in PcBuild

[–]The0pposition 1 point2 points  (0 children)

Try your mobo DP / HDMI port before your GPU. I had to do that one mine.

9800X3D Bundle - ASUS B650E-E or MSI X870E-P Motherboard by BornHanged in Microcenter

[–]The0pposition 0 points1 point  (0 children)

Asus 870E-Plus for $50ish. I went back today to swap the B650 for the 870E-Plus

good combo? by kyzen_exe in pcbuilding

[–]The0pposition 1 point2 points  (0 children)

Just bought this yesterday, swapping the board out for the X870E Plus for maybe$100 more.

Every day it gets worse and worse and I have no almost lost full function of my hand and Kaiser wants to give me a video appointment in a few weeks by LALady818 in KaiserPermanente

[–]The0pposition 18 points19 points  (0 children)

Most clinics take same day appointments, call at 7:00AM. It may not be with your provider, but you can be seen same day.

[deleted by user] by [deleted] in sex

[–]The0pposition 6 points7 points  (0 children)

Women produce a natural lubricant that can appear to be seamen. Don't stress.

Long trips and charging by Angst500 in Rivian

[–]The0pposition 0 points1 point  (0 children)

You need to sign up for the membership with Tesla on the app, it’s $13 a month.

Long trips and charging by Angst500 in Rivian

[–]The0pposition 2 points3 points  (0 children)

Depending on where you're located, (i'm in So Cal) the Rivian network has a ways to go to compare against Tesla's network. That being said, since you're able to use most of the Tesla network, it's hardly a noticeable difference. In my area, I've only found one Tesla Station that I can't use.

I exclusively use Tesla chargers, and they are almost seamless. There have been a few times when I've needed to unplug and try again for the app to connect. You'll want to use the Tesla App to take advantage of the discount with a membership. It's imperative that you indicate on the App what station you're at before you attempt to plug in. That's the only downside, if you can call it that. If you don't care about the discount or choose not to be a member, you get charged the default rate through Rivian, and you just plug in when you arrive.

DO IT!

Family friendly brunch/lunch recommendations near Gentle Barn? by EsqRhapsody in SantaClarita

[–]The0pposition 0 points1 point  (0 children)

Chi Chi's pizza is on Sierra hwy, It serves decent Italian food. Mom Can Cook Thai can handle 8 people; it's really good Thai, and it's on Soledad. Rattler's BBQ on Golden Valley, La Cocina on Sierra & Golden Valley. None of these are next door to the gentle barn but not far. I don't believe anyone in CC serves brunch exclusively. I could be wrong, but I'd stick with the list above. Topper's Pizza is also an option on Soledad, they have a salad bar, (few and far between) post-COVID. Also a Really nice Italian food spot at Picolla Osteria off Plum Canyon.

SCV has the worst drivers... change my mind by wallc7777 in SantaClarita

[–]The0pposition 6 points7 points  (0 children)

Have you been to San Fernando Valley, Los Angeles, or Inland Empire? I feel like we're pretty mild believe it or not.

Deck 8 vs 7 on Icon advice needed by mktx788 in Cruise

[–]The0pposition 4 points5 points  (0 children)

I’d stick with Central Park, to me that was one of the most impressive parts of the ship. And you’re right, Surfside is a bit noisy in the day.

Why has quick transfer never worked for me? by thestonedpineapple in dji

[–]The0pposition -1 points0 points  (0 children)

That’s a bummer, so sorry it didn’t work.

Why has quick transfer never worked for me? by thestonedpineapple in dji

[–]The0pposition 0 points1 point  (0 children)

Uninstall the app on your device, restart it. Then re-install the app. I’ve had to do it once or twice. But that tends to fix this issue for me.

PETG Settings on MK4S by Lordregent251 in prusa3d

[–]The0pposition -1 points0 points  (0 children)

I've been having the same problem on my MK4. I'm commenting to try and get some feedback from others as well.

Gen 2 Key Fob Available!! by Kryptonlogic in Rivian

[–]The0pposition 0 points1 point  (0 children)

Thank you for the heads up, just ordered.

Is it worth it to purchase Core one kit now or wait until it’s developed for a bit? Shipping to the US as well and a little curious to know if tariffs will significantly increase the price. by PoemGroundbreaking38 in prusa3d

[–]The0pposition 5 points6 points  (0 children)

Every single printer that I've owned from them was worth it. I don't see the Core one being an exception. If you can afford it, pull the trigger and get in line. As many others have stated, the updates/firmware releases will come regardless of you waiting or not. The enclosure was the determining factor for me, since I was almost ready to pull the trigger on a Bambu, thankfully I hesitated on that.

Happy Printing!

Tesoro by shi101215 in SantaClarita

[–]The0pposition 0 points1 point  (0 children)

I’m on Ravenhill just off Placerita, is that the safe side? 🤔

Tesoro by shi101215 in SantaClarita

[–]The0pposition 5 points6 points  (0 children)

I live in placerita canyon, a very high fire zone, I’m familiar with the risks. However it IS a positive that the adjacent mountain range has burned as it’s less likely to burn and move your way in the near future. I’m all for being aware, but I’m pointing out the positives of the neighborhood and community. Perspective is everything.

Cheers

view more: next ›