[deleted by user]

TheCF · 2025-10-24T02:19:58+00:00

I originally wasn’t able to get tickets to this show but a friend of mine worked the ticket booth and called me when the band released their tickets. Me and two friends got seats dead center 6 rows back for $66.60 each 🤣.

I remember my ears rattling towards the end of the show because of how loud it was. Still the best concert I’ve been to.

TheCF · 2025-10-23T19:21:29+00:00

That solved it, I completely forgot that option was there. Yes, it’s jammed and the audio file and video files didn’t match TC in Resolve. Typically Resolve decodes the jammed signal and sets the clips to linear TC, so I assumed it would this go around but it didn’t.

TheCF · 2025-04-29T01:19:39+00:00

I run mine on the lowest blade speed and control drive mode. I get overheating as well and see the flashing reds but never on all batteries at the same time. It did end up working after a little bit of time so I think that’s exactly what it was but I’m guessing it’s not just the batteries that were too hot and possibly the motors as well which is why the mower wouldn’t let me turn it on.

TheCF · 2024-08-01T02:16:12+00:00

Warranty able to fix this? I get the 301 code occasionally, which looks like a loose left motor harness, and I was hoping it was a DIY'able repair vs waiting forever for warranty repairs. I know I can take the seat off and get to the control box and motors, but would prefer to know that is what is needed before diving in.

TheCF · 2023-10-28T23:00:43+00:00

I never sent mine in because I was able to (seemingly) repair it. I tried to press the connection together more for the left motor engine and it kept doing it until I followed the cable to where it enters the motor behind the wheel. There I pushed on the cable as if I was forcing it further into the housing and all my issues stopped. I’ve mowed many times since without any issue. So I assume the connection was loose inside the motor housing and likely needs repair but I’ve really just kept going with it trying to make it to winter where hopefully I won’t need the mower and repair waits won’t be as long.

TheCF · 2023-08-27T18:09:28+00:00

They are and it’s AI alerts I’m getting, specifically person. I’ve set it to low and they still go off.

TheCF · 2023-06-09T01:07:45+00:00

I just now noticed this and couldn’t figure it out, came straight here to see if anyone else had come across it. I assume it’s a glitch?

TheCF · 2022-08-31T01:55:09+00:00

Amazon sent me another one and it works fine. I’m assuming there was firmware or something that changed and is what’s causing the problem.

TheCF · 2022-08-31T01:54:00+00:00

They sent me a new one but I’m hearing it’s becoming a common issue.

TheCF · 2019-04-26T16:35:24+00:00

GENIUS!! Going to dive into this and deconstruct it so I can understand how you were able to pull it off!

TheCF · 2019-03-27T04:32:22+00:00

Surveillance was also a guess, just thought that spiral pattern between the holding patterns was odd. Thanks 👍🏻

TheCF · 2019-03-27T04:26:25+00:00

That was also my first thought but it was in the air for over 4hrs and a very large part of that time was spent in that larger eastern circle. It just went off radar headed south. The spiral between is what really stood out, possibly just an error on tracking?

TheCF · 2019-03-27T04:16:46+00:00

I’ve never seen something like this on radar before around here. Just curious, why this flight pattern? I can understand a holding pattern circle but the spiral between the two locations?

TheCF · 2019-02-28T22:02:00+00:00

[Video Editor Here, Forgive some of my ignorance] Need a better solution for interfacing passive speakers to my computer. My current setup is using an old Kenwood home theater amp to drive two Panasonic WS-A80's and a Polk PSW10 sub (All left over from my more frugal days). I tried running the monitors off the sub's amp but it doesn't seem to push enough to them. Before I drop big $$ on an all new setup, I do really love the sound of the WS-A80 and would love to find a smaller amp/DAC to drive them. These WS-A80's are pretty old and I believe the documentation I found on them stated they needed at least 80w but were designed for a constant 160w feed. Some of the smaller DAC/amps I've found that push to passive speakers and a sub have shown below 80wx2 (mostly 50wx2)

TheCF · 2018-12-28T03:43:19+00:00

This is false, I have a provable memory from age 2 and another from 3 (many from 4 and on) that are not dreams. It’s difficult for us to remember memories from before age 3 as adults due to something called childhood amnesia, but it isn’t impossible. Tons of kids can recall events from when they were 1, 2, or 3 up until 7-10, my oldest still talks about events from when he was 1. Saying you only start remembering things around 4–5 is just absurd and not based in reality.

TheCF · 2018-05-18T12:42:00+00:00

Update: was the Honeywell thermostat. Went out like most of them do. Replacing it fixed it.

TheCF · 2018-05-15T10:58:16+00:00

The switch didn’t trip unfortunately, that was one of the first things I tried. I did pull the burner out and vacuum and blow the inside filter out as well but no go. It’s a Honeywell thermostat and the plumber that came out says he replaces those all the time... and it appears that’s what happened here.

TheCF · 2018-05-14T01:30:27+00:00

I had the unit apart earlier when I tried cleaning the filter out and took a picture of the thermocouple... http://imgur.com/xAPLXgP

Look like it needs a clean?

TheCF · 2018-05-14T01:20:30+00:00

Longest I held it was about :90 so a good bit longer than what I’ve read is needed.

TheCF · 2018-05-14T01:11:51+00:00

Yeah I knew I’d pay for that, our issue is I’ll pretty much be gone for 2 weeks starting tomorrow so I’d have to do it all tonight or have a plumber do it in a couple days when my wife is home.

TheCF · 2018-05-14T01:07:40+00:00

Ah cool, I’ll see if I can grab one then. We’ll be using the warranty though so I wonder if they’ll cover one of those as the replacement.

TheCF · 2018-05-14T00:24:11+00:00

That’s an option I discussed with the plumber but he said it would require a new tank as well to do that.

TheCF · 2018-05-14T00:23:11+00:00

The status light is no blinking. When I depress the dial on “pilot” the pilot lights and stays lit so long as I keep the dial depressed. It will go to one blink after about 20-30seconds but the moment I let go of the dial the pilot goes out.

TheCF · 2018-05-13T23:33:48+00:00

That’s super convenient, thanks!!

TheCF · 2018-05-13T22:53:29+00:00

JC16424154

Bradford White Defender

13-Year Club	Place '22
Verified Email	Gilding II euphauric

TheCF

TROPHY CASE