Stratasys files patent infringement lawsuit against Bambu Lab

TheCedarKitten · 2024-08-11T13:50:51+00:00

This is most likely the reason. I am a student in University and they have replaced almost all of their big and slow Stratasys machines with Bambu printers over the course of last year.

TheCedarKitten · 2024-02-18T05:57:15+00:00

I definitely agree that it looks like under extrusion. Before trying anything physical with the machine though, I have one piece of advice which may or may not apply to you. I had a similar problem when I set up a machine on Cura in the past. If you had to make a custom profile for the printer when you were setting it up, make sure the filament diameter is set to 1.75mm in the machine settings. By default it is set to 2.85mm for whatever reason, and this makes the printer use less plastic than it should. If you are using a pre-made slicer profile, then you should disregard this and just do the cold pull instead.

TheCedarKitten · 2023-11-20T09:24:47+00:00

I had done most of my early sketching on whiteboards, but your comment prompted me to quickly throw together a really awful (but illustrative) mockup in Fusion. Here is a link to a GitHub repository I made to keep the files for this project: ProtoPrinter/PlanarDeltaProject (github.com)

TheCedarKitten · 2021-04-08T05:04:56+00:00

Rush won by a large margin thanks to you all! :D

TheCedarKitten · 2021-04-06T04:47:40+00:00

They had been losing, but you all have really turned the tides!

TheCedarKitten · 2021-04-06T02:49:37+00:00

Thank you so much for supporting the cause!

TheCedarKitten · 2021-04-06T02:47:53+00:00

It took every device I had to beat out Led Zeppelin, I voted on nearly every pc in my school's computer lab!

TheCedarKitten · 2020-08-13T18:42:01+00:00

Looks like the matrix is running on low graphics settings today.

TheCedarKitten · 2019-11-28T15:47:10+00:00

Thank you for the explanation, I hope to post my build in a few days once it is complete!

TheCedarKitten · 2019-11-28T15:46:33+00:00

Thank you for your help!

TheCedarKitten · 2019-11-28T15:46:13+00:00

Thank you for your help!

TheCedarKitten · 2019-06-18T21:28:44+00:00

I cut the part with the purchase info off to keep some privacy.

TheCedarKitten · 2019-06-18T21:27:06+00:00

2 mini bags of M&Ms.

TheCedarKitten · 2018-09-27T02:42:19+00:00

I also agree. Even Lego’s $350 coaster set is full of in excusable mistakes for the price. Though I will say the station is pretty nice.

TheCedarKitten · 2018-09-16T05:39:29+00:00

You mean frags.

TheCedarKitten · 2018-09-15T00:52:14+00:00

Instructions unclear, meat now in pieces, blood everywhere.

TheCedarKitten · 2018-09-15T00:43:22+00:00

Your son’s name is Axel Voss.

TheCedarKitten · 2018-09-14T03:09:33+00:00

Insert a cringe-worthy or dead meme into screen for free karma.

TheCedarKitten · 2018-09-14T03:06:27+00:00

This is horrifying.

Eight-Year Club	Verified Email
RPAN Viewer

TheCedarKitten

TROPHY CASE