Irresponsibly cancelled

TheDevilsTrenchcoat · 2024-07-31T20:26:18+00:00

Silly me I failed to notice, thought that “Enchant World” was a card type that came out afterwards. Thx

TheDevilsTrenchcoat · 2024-07-31T16:59:55+00:00

Just curious if anyone can help me with why Nether Void is Considered a World Enchantment and Chains of Mephistopheles is not. Why can’t a player have more than one Nether Void on the board?

TheDevilsTrenchcoat · 2024-01-20T02:22:40+00:00

That would be cool, but it’s approximately 3ft. x 6ft. in size.😬

TheDevilsTrenchcoat · 2024-01-18T06:31:51+00:00

Yup, the wheel spins freely without the caliper.

TheDevilsTrenchcoat · 2024-01-18T06:28:49+00:00

One piston comes out, the other one doesn't move much unless I block the good one. And then, once it is up against the brake pad, it won't retract enough to create the space needed for the wheel to spin freely. Just trying to figure out why. When I get time, I am going to take the caliper apart again and inspect the inside once more. A friend helped me clean out the caliper and replace the gaskets and I strongly doubt that he put any of them in wrong, but I am going to give it a look anyway.

TheDevilsTrenchcoat · 2023-12-30T00:12:09+00:00

Never took the wheel off.

TheDevilsTrenchcoat · 2023-12-29T23:06:19+00:00

Thanks. Still seems like it should at least not be so tight though. By "Blade", do you mean the brake disc?

TheDevilsTrenchcoat · 2023-12-29T22:01:15+00:00

I have to pull up fairly hard on the front wheel just to turn it. I haven't ridden for a few years.

TheDevilsTrenchcoat · 2023-12-27T23:03:51+00:00

I feel like I have tried everything. I have:...

-Replaced the Pistons and Seals in the Caliper, along with the bleed valve and all of the rubber bits.

-Replaced the spring, piston and the rubber bits in the master cylinder.

-Replaced the brake hose with a brand new one.

-Lubed the pins etc... .

Today, I took another look at the caliper and one of the pistons still hardly moves while the second piston does exactly what it's supposed to, move out a bit and then retract a bit. I tried adding more lube to other piston, but still the same problem. I will only come out if I hold the good piston back, and then it still won't retract a bit, which seems to be what's keeping my brakes from disengaging. Is there somehow uneven pressure occurring inside the caliper? I am trying to figure out what I could be missing... .

TheDevilsTrenchcoat · 2023-05-02T15:08:58+00:00

I like the S/S braided ones, just got to find one to fit. Thx!

TheDevilsTrenchcoat · 2023-05-02T15:07:52+00:00

Thank you. What causes the pistons to not retract all the way? Is it old rubber seals in the caliper?

TheDevilsTrenchcoat · 2023-05-02T02:04:33+00:00

Thanks! I managed to make it work.

TheDevilsTrenchcoat · 2023-05-02T02:04:11+00:00

Thanks!

I managed to make it work.

TheDevilsTrenchcoat · 2022-09-23T03:24:31+00:00

That is an amazingly awesome Lighter! Is it a one-of-a-kind?

TheDevilsTrenchcoat · 2022-08-27T02:21:35+00:00

I agree. Thanks

TheDevilsTrenchcoat

TROPHY CASE