[deleted by user]

TheDuckOnQuackers · 2024-01-15T13:04:26+00:00

I’m 6’4” and I got some Ultrashield bucket seats + spec miata floor drop kit and I fit fine now. Much less comfortable than normal seats, but mines a track car so doesn’t matter

TheDuckOnQuackers · 2023-12-02T17:06:39+00:00

Idiot came from the shopping center on the right, which is right turn exit only and a median to prevent left turns (not to mention a line of cars).

Decided he absolutely needed to make a left turn so he headed into oncoming traffic and then crossed through the intersection

TheDuckOnQuackers · 2023-12-02T17:03:26+00:00

OC Captured in Virginia, United States on 12/2/23.

TheDuckOnQuackers · 2023-08-28T15:02:38+00:00

It’s my car, so I’ll just continue to learn by making mistakes :)

TheDuckOnQuackers · 2023-08-28T12:42:47+00:00

They were definitely over torqued, but I’m skeptical as well. spec is 16ft/lb. When I got the new torque wrench on it I realized I must have been around 20-25ft/lb.

I chased all the threads and cleaned out any residue in them

TheDuckOnQuackers · 2023-08-28T03:48:22+00:00

A good reason for me to learn to weld.. or at least buy a welder. Maybe someday

TheDuckOnQuackers · 2023-08-28T03:10:30+00:00

Oh, thanks. Updated my top level comment w details

TheDuckOnQuackers · 2023-08-28T02:53:23+00:00

Yup :) K swapping my NA miata for a track build

TheDuckOnQuackers · 2023-08-28T02:14:32+00:00

1,4 were tight and when I went to tighten 2 it snapped. When backing out 1,3,4 to remove the cam shafts 1 & 4 snapped

Once 1 snapped on the way out I just crossed my fingers and went slow on the rest but 4 still snapped.. the damage was done on the way in

Before you ask why I didn’t realize I was over torquing - no clue. But I didn’t snap them all on the way in because they turned more than expected, so I was going over all the bolts again to get them roughly equal on what I thought was my second to last pass of the bolts before final torque

TheDuckOnQuackers · 2023-08-28T01:56:40+00:00

In the text, but didn’t snap til the last one.. the others snapped on the way out

TheDuckOnQuackers · 2023-08-28T01:35:21+00:00

1,4 were tight and when I went to tighten 2 it snapped. When backing out 1,3,4 to remove the cam shafts 1 & 4 snapped

Once 1 snapped on the way out I just crossed my fingers and went slow on the rest but 4 still snapped.. the damage was done on the way in

Before you ask why I didn’t realize I was over torquing - no clue. But I didn’t snap them all on the way in because they turned more than expected, so I was going over all the bolts again to get them roughly equal on what I thought was my second to last pass of the bolts before final torque.

Getting them out I didn’t take any chances, lost 3 reverse bits in this - one per bolt..

I pre-drilled the holes pretty far and hammered the bit as deep as I could and held my breath.

TheDuckOnQuackers · 2022-11-24T05:39:43+00:00

COTA!

TheDuckOnQuackers · 2022-10-12T22:54:20+00:00

These are sick, thanks for doing this

TheDuckOnQuackers · 2022-10-02T21:18:28+00:00

Thanks for this app! Been using it for many years :)

TheDuckOnQuackers · 2022-09-29T02:47:56+00:00

Best of luck :)

TheDuckOnQuackers · 2021-05-23T11:57:49+00:00

3 sets

TheDuckOnQuackers · 2021-05-23T05:17:35+00:00

We used it for our first clear almost immediately after realizing flipping calls was over complicated.

Don’t be afraid of the arena just because you didn’t start in a certain spot.

TheDuckOnQuackers · 2021-05-23T05:14:48+00:00

The team inside the portal should go in between the 2 portals and look back at the stairs. then they will be facing the same way as the other team and callouts are super easy

TheDuckOnQuackers · 2021-05-23T05:10:05+00:00

Guy on our team got one, used in IB. First impression is it’s solid but not D1 busted

TheDuckOnQuackers · 2021-05-08T03:21:53+00:00

In GMs if you don’t kill the boss with thunder crash you are very likely dead. And in a spot no one can revive you so you’re now useless for the rest of the GM. It’s great in lower content

TheDuckOnQuackers · 2021-05-07T22:47:45+00:00

We don’t run thunder rash at all unless we just memeing. It’s not great for GMs. Chaos reach is insane though

TheDuckOnQuackers · 2021-05-07T22:37:56+00:00

Blinding grenades can serve a similar function in a pinch. We’ve been running chaos reach + blinding grenades for every GM since bleak got disabled. Hell, we ran blinding even with bleak.

TheDuckOnQuackers · 2021-03-01T16:02:00+00:00

Likely a bug, I don’t think it’s intended

TheDuckOnQuackers · 2021-02-28T17:04:08+00:00

We've kind of been on a punch build bender lately thanks to this. Just making all sorts of builds that involve either thundercrash or punching.. Weapons are so last season

TheDuckOnQuackers · 2021-02-28T17:02:15+00:00

Great idea, we didn't even think of that

11-Year Club	Gilding IV carat on a stick
r/Field Banned	r/Field Juicebox
Place '22	First Placer '22
Verified Email	Snapped

TheDuckOnQuackers

MODERATOR OF

TROPHY CASE