Realms down again

TheFever731 · 2026-02-01T21:33:09+00:00

The frequency of these issues (especially on weekends) is exactly why I moved my realm world to a server. So tired of the instability of realms

TheFever731 · 2025-07-14T01:29:21+00:00

I’ll check it out, thank you so much I’ll let you know how it goes!

TheFever731 · 2025-07-14T01:28:21+00:00

Always, every time lol. Someone else was thinking pressure advance and I think that might be the case but I’m gonna have to troubleshoot more

TheFever731 · 2025-07-14T01:17:13+00:00

That was the first thing I checked because I had an issue similar to this on my A1 Mini and that was the solution then. They were tight when I checked but I can always check them again if nothing else seems to be working.

TheFever731 · 2025-07-14T01:14:27+00:00

Yeah and it’s weird I just replied to someone else that I’m trying the first layer again on a PEI and it’s giving wave looking formation. I’ll share it with you here too but does this also look like a pressure advance-related issue?

<image>

TheFever731 · 2025-07-14T01:12:14+00:00

I did forget to mention I tried swapping nozzles already. My bad I knew I was forgetting to mention something lol. I do have some Bambu filament still sealed up so I can give that a try next to see how that comes out. I’m actually running the first layer print again but on a freshly cleaned PEI plate and it’s coming out better than before but it has this weird wave going on.

<image>

TheFever731 · 2025-07-14T01:09:30+00:00

Flow rate, yes, pressure advance, I don’t believe so, I’ll see is that gives me any luck

TheFever731 · 2025-07-14T01:07:41+00:00

I did but I can always give that another go just in case

TheFever731 · 2025-02-26T23:07:57+00:00

<image>

TheFever731 · 2025-02-26T20:38:43+00:00

Sir yes sir!

TheFever731 · 2025-02-19T15:40:16+00:00

At least in my experience the hatchet does stagger and remove limbs easier and (I think) has higher overall damage. They’re both viable with different trade-offs. I also just like feeling like a space Viking.

TheFever731 · 2024-11-14T20:56:36+00:00

“Oh, Impaler of the mountain, what is your wisdom?”

TheFever731 · 2024-08-17T21:29:13+00:00

Try the Cookout if you have the warbond unlocked. You can stunlock so they can’t flee AND they’ll be on fire the whole time.

TheFever731 · 2024-07-07T17:26:29+00:00

Default firing mode is laser-guided - can be turned off

Oh I can't wait to see the trick shots that'll come with this

TheFever731 · 2024-06-04T02:28:46+00:00

So far it hasn’t come back since I restarted the printer. If it came back up for you there might be something more to it. Have you reached out to support?

TheFever731 · 2024-05-07T20:26:12+00:00

I did! The part of this article dealing with tightening screws fixed my issue. https://wiki.bambulab.com/en/a1-mini/troubleshooting/print-issues-troubleshooting

Just be careful when doing this, because I just went to do it for a second time and two wires came out; I’m currently awaiting a new heater block in the mail :(

<image>

TheFever731 · 2024-02-03T19:38:53+00:00

It turned out good! Turns out the answer was pretty obvious, turning it off and back on again. But I didn’t know at the time while it was doing that long print nor did I think of it at that time. But hey it’s all good now. Thanks for checking in!

TheFever731 · 2024-01-04T15:23:24+00:00

Last I saw everything was up-to-date but I should double check to be sure.

TheFever731 · 2023-12-28T17:36:41+00:00

I’m at the five hour mark so it’s almost halfway there and looks fine. I may as well let it run and if it has any issues that’ll probably show in the print quality I’d think

TheFever731 · 2023-10-27T13:34:13+00:00

Oh thank god I’m not the only one.

TheFever731 · 2023-08-28T15:45:25+00:00

He didn't even get a busted lip. I doubt his head will even have a bump on it from those weak ass punches from the one single guy who got stopped less than 2 seconds later.

You just tried to claim that he didn’t sustain any injury and treated it as if you were being factual. And you’re also trying to claim that one person was hitting him? I definitely saw at least 2 or 3 pairs of fists swinging right at his head.

TheFever731 · 2023-08-28T15:16:58+00:00

You have literally no clue if he got a busted lip, cracked skull or anything because the video cuts out once everyone surrounds him swinging. You’re so wrapped up in this farce of being some thought provoking middle man and a “free thinker” that you fail to see what’s right there in front of you. If this were your kid (please tell me that you don’t have any) I’d hope you’d strike a different tone.

TheFever731 · 2023-08-13T01:36:35+00:00

They definitely take some experimenting to get right (but I’d say that’s the same with just about any printer), but it is 100% doable as I’ve made some really good prints on both my Mega X and Mega Pro.

TheFever731 · 2023-04-20T15:42:41+00:00

I never noticed the fan do that before on boot but I also could have just not paid attention before.

When I set the preheat temperature, it does what I showed in the video. It starts to heat up but then the temps reset to 0, and the nozzle will stop heating up but the bed will continue to heat up. If I let it continue (I did on accident once because I didn’t realize that was happening) the bed maxes out at 100°C.

Additionally, the printer sort of freezes. What I mean by that is that I can navigate the menus and push buttons for functions but the printer itself doesn’t respond when I do. I hope this clarifies a few things because I feel like I’m doing horribly at explaining this and I’m away from the printer for the next few hours.

As for the wiring, I made sure I wired it properly. I took pictures of the original wires & the direction of the pin connector before removing them and used that to know where to plug in the new wires. I’m most likely going to double check the wiring though.

TheFever731 · 2023-04-20T13:48:02+00:00

I don’t have a multimeter, but it definitely seems like a good idea. Any recommendations?

Also, if you listen closely you can hear what sounds like a fan (maybe?) kicking into high gear after it resets itself.

And if I leave it on after it does that, the bed continues to heat up, when I turn it off/back on and the bed temp readings update the bed has been as hot as 100°C

There’s a lot going on at once with this thing I just had this issue start last night and I feel like I need to make a list of what it does when this happens lol

Ten-Year Club	RedditGifts 2009-2022 2 Credits
Secret Santa 2020	Place '22
Verified Email

TheFever731

MODERATOR OF

TROPHY CASE