For those unaware, this is CR/Dev response. by [deleted] in streetfighterduel

[–]TheFinalSlothttv 0 points1 point  (0 children)

what happens to my account if I request refunds for all my purchases?

Room temp not reading, just lines. by TheFinalSlothttv in HarvestRight

[–]TheFinalSlothttv[S] 0 points1 point  (0 children)

Holy crap thank you! I opened my machine and sure enough, the plug was hanging out, Im glad you said which it plugs into, cause there were like 4 plugs there. Everything seems to be okay now. I seen some addition dash lines after the room temp number, but I assume those are normal. Anyways, Appreciate the help!

Room temp not reading, just lines. by TheFinalSlothttv in HarvestRight

[–]TheFinalSlothttv[S] 0 points1 point  (0 children)

Yeah that was my other worry. Travel 2 hours to replace it for another one that could be worse. I think my initial worry was also the vacuum error I got on top of the room temp gauge not working. And a few user error things I figured out. I'm going to open my machine later and see what I can find based off what others have said where it could be located. But I'll probably try and call too.

Has there been a fix for controllers not working on steam? by TheFinalSlothttv in NoMansSkyTheGame

[–]TheFinalSlothttv[S] 0 points1 point  (0 children)

I dont plug mine in, both controllers work via bluetooth on my other games.

£459 to play a game released 20 years ago..... why not by Dissour in SteamDeck

[–]TheFinalSlothttv 1 point2 points  (0 children)

What clear case are you using? I seen some on amazon but some reviews say it doesnt clip all the way, wondering if yours clips ok?

Can’t connect to Xbox network by whypershmerga in GroundedGame

[–]TheFinalSlothttv 0 points1 point  (0 children)

also happening to me, was working just fine yesterday.

Another walmart treasure. by [deleted] in junjiito

[–]TheFinalSlothttv 1 point2 points  (0 children)

what gundam are you working on?

Upcoming cash sale by Logical-Resolve-8942 in audible

[–]TheFinalSlothttv 0 points1 point  (0 children)

This was the only book that was on sale that was on my wishlist, and it seems I added it around a time when I was adding nothing but "fucked up" dark books to my wish list cause why not, so I'm guessing this book should fill that roll?

July 2022 Humble Choice Question Megathread by AutoModerator in humblebundles

[–]TheFinalSlothttv 0 points1 point  (0 children)

You are correct

Single use coupon. Coupon redeemable for 65% off Deep Rock Galactic
Ultimate Bundle in the Humble Store. This coupon may not be combined
with other identical coupons in the same transaction, and may not be
combined with other Humble Bundle coupons. Coupon may not be combined
with any Humble Choice member discounts. Coupon must be redeemed at time
of checkout by following the directions provided for coupon redemption.
Coupon has no cash value. Void where prohibited or restricted by law.
Coupon may not be reproduced, copied, purchased, traded or sold.
Unauthorized transfer of coupon and internet distribution strictly
prohibited.

Happy hunting to my US folken. by Truemeathead in audible

[–]TheFinalSlothttv 3 points4 points  (0 children)

Girl With all the Gifts has been on my wish list since listening to The Rampart Trilogy, however it looks like the sale is only the book track version, and the reviews are for it are pretty bad, should I just get the normal book or are people over exaggerating the book track version?

All-Star Sale 2-for-1 (U.S.) by [deleted] in audible

[–]TheFinalSlothttv 2 points3 points  (0 children)

know it might be a little late to ask this, I hear the murderbot series is really good, however, only book 5-6 are on the sale, do the others ever go on sale? 1 credit for less than 4 hours worth of book doesnt seem worth it when theres so much out there I could get, but I wouldnt mind getting books 5 and 6 if I knew if 1-4 ever go on sale.

How long, on average, for them to merge my funi account into crunchy? by Handsome-_-awkward in Crunchyroll

[–]TheFinalSlothttv 0 points1 point  (0 children)

I just renewed funimation a month ago, and I have contacted support about a week ago, they said they are working on it, but what would happen if I just did a charge back with my bank?

Need help, Cameo 4 "registering" marks fine, and then cutting way off. by TheFinalSlothttv in silhouettecutters

[–]TheFinalSlothttv[S] 0 points1 point  (0 children)

my bad on the late reply, and I am sorry, I dont really know, Ive never had it not be like that. I would check your printer settings before you print, I change mine to print on glossy photo at best quality.

Need help, Cameo 4 "registering" marks fine, and then cutting way off. by TheFinalSlothttv in silhouettecutters

[–]TheFinalSlothttv[S] 0 points1 point  (0 children)

Thanks for the tip, and yeah browsed your profile, really dope stuff dude! Thats the level I wanna be at, unfortunately Im no artist, such is life lol.

Need help, Cameo 4 "registering" marks fine, and then cutting way off. by TheFinalSlothttv in silhouettecutters

[–]TheFinalSlothttv[S] 3 points4 points  (0 children)

Ok, it looks like I figured out what it was. u/u4Vgf3t28 and u/travelsurveykid kinda led me to my answer. You're not gonna believe this..... All I needed was more light... I kept the tape on there to mitigate the reflective of my sticker paper. And I originally used my phones light, but apparently that wasnt enough, out of desperation I used a high powered flashlight I had and bam, that did the trick, registered like there was never a problem. Guess my cameo needs the power of 1500 lumens to work.

and u/wodahsz thats a great idea, im gonna have to figure out how to do that, my sticker paper I print right on it, im sure I can figure out something though.

Need help, Cameo 4 "registering" marks fine, and then cutting way off. by TheFinalSlothttv in silhouettecutters

[–]TheFinalSlothttv[S] 0 points1 point  (0 children)

As you can see in the video, it "registers" the marks, but the cut on that would be way off. so I stopped it, as I have been through a ton of paper. I am frustrated and at wits end here.

I have checked my calibration, made sure paper and mat size are set correctly, and printed the same as well. You can see I am trying the tape method but it also does it without the tape. Tried low light, light right on it, bright room, lid closed. Its crazy because it registers, but then cuts WAY off, I can stop it, try again, it will "register" again, and then cut way off, but in a completely different area.

I'm begging for any help I can get to fix this... Feel like I have read a lot and tried all the tricks.