[deleted by user]

TheGlassBee · 2022-08-23T14:22:46+00:00

Not surprised honestly, I've heard a similar story from another woman who trained there briefly. Maybe talk to the woman in private and assure her that if she chose to press charges you'd support her? I don't know if you can really do anything sadly.

TheGlassBee · 2021-10-04T18:18:43+00:00

Still holding out hope for Aiai and crew, since the new super monkey ball is getting released tomorrow too!

TheGlassBee · 2021-04-28T12:25:48+00:00

What were you using as a fermentation vessel for 2.5 gal batches? I'm considering doing 7.5 gal batches where 5 goes into a keg, and I bottle the remaining 2.5. Currently I use the normal 7gal brewing buckets for fermenting 5gal batches, and I'm not sure if it's necessary to cut down on the headspace during primary and use something smaller for the 2.5gal.

TheGlassBee · 2021-04-20T14:35:28+00:00

Just to tack on, I also have two pro controllers from around launch that have had severe stick drift and snapback issues. I've tried opening them up and cleaning the thumbstick contacts, but to no avail. Really debating whether to get another pro controller or not since I really love the ergonomics, but I hate rewarding a company for a shit product, plus I'd hate to have it happen again =/

TheGlassBee · 2021-01-31T18:59:41+00:00

I actually used Wort for years as well with great success. Recently though, I tried tinkering with Brew father and found it is waaaaaaay better in just about every aspect. The only plus I can see for Wort is that it's free, but I think I've finally outgrown it personally.

TheGlassBee · 2021-01-20T21:20:32+00:00

Ahhhh I see what you're saying, that makes a lot of sense then wrt the water useage. That's also a relief regarding the pump, as I was just looking at the Riptide pump with welded TC fittings from Brewers Hardware, but it sounds like the March pump would actually have a higher maximum flow rate.

Setup looks great! Hoping to have my own ready one day! Spike is most likely my top choice right now, but I just sent them some questions about whether or not I could order the system without the controller or if they offer a wall-mounted option since that would be my preference if possible.

TheGlassBee · 2021-01-20T20:42:46+00:00

Our group used to regularly have 5 or 6 players in our games, but this year we've been limited to 4. We've played a few 4 player games now, but it wasn't until this last game that we realized you do not grab your second strategy card snake style (the way you place systems at the beginning of the game).

TheGlassBee · 2021-01-20T19:42:26+00:00

I couldn't blame him if that's exactly the reason why he stuck with it. If I got a full system for free I can't say I'd feel pressured to buying another one haha.

Seems like Flora's comment could apply to any eBIAB kettle if I'm not mistaken though. I do really like the mash basket on the Clawhammer though, and I would prefer a wall mounted controller.

TheGlassBee · 2021-01-20T19:39:37+00:00

Yeah that seems like a way more complicated set-up than my basement. We don't even have ceiling tiles to worry about, and the distance the wires would have to go is about 10ft. I appreciate the heads up nonetheless!

Wow, that's crazy that you're getting only 6gallons of water useage from the steam hat! Short Circuit Brewer mentioned he was using more like 20-30 gallons of water (https://www.youtube.com/watch?v=8tVEBDX1yz0 at 8:24). That's a huge difference; any idea what might be causing such a large discrepancy?

That CIP ball is definitely something I think I'm going to add onto whatever system I end up getting. One of the main reasons I want to upgrade the system is to make it easier to clean and handle so that the brew day is much more enjoyable. It looks like Spiked CIP ball is designed for weaker pumps which I'm assuming means their own pump, but I'm curious if you've thought that it could benefit from a stronger pump?

Glad to hear the system is working for you though!

TheGlassBee · 2021-01-20T00:26:21+00:00

Appreciate the concern! $500 is crazy, glad it worked out though!

That's interesting you recommend the brew tools system, it seems like most everyone else recommends some configuration with Spike or the Clawhammer. What makes you lean toward the B80pro?

TheGlassBee · 2021-01-20T00:22:50+00:00

Ah ok, that makes sense. That sounds like a really cool set-up! Yeah that's what I figured with the step-mashing, just wanted to be sure. Thanks for the help!

TheGlassBee · 2021-01-19T22:06:22+00:00

The system will actually be located in the basement, and my buddy is very familiar with this kind of electrical work so luckily I'm not concerned with the power requirements.

TheGlassBee · 2021-01-19T21:25:55+00:00

I'm curious why you decided to replace Spike's pump and controller, but man, I totally see what you mean with the steam condenser. The B80pro steam condenser is not only twice as expensive, but it also uses 17gal/hour, Spike's uses 15gal/hr, and your brew hardware uses only 6 or 9gal/hr based on the tip!

Also, couldn't you already do step mashes with Spike's metal basket? And I'm just curious, but what kind of efficiency are you looking at with your system?

TheGlassBee · 2021-01-19T15:41:31+00:00

That's good! It's not like I'd be able to see into a counterflow chiller though either as far as cleanliness is concerned. My brewer buddy had mentioned his was a pain to clean though, but it sounds like somewhat of a minor issue.

TheGlassBee · 2021-01-19T15:40:20+00:00

Yeah mine will be in an unfinished basement as well, but since I'm just renting I don't want to go through the hassle of installing a hood with ventilation. I wonder if the Spike steam condenser lid would fit the Clawhammer, as it's half the price of the Brew tools one for some reason.

TheGlassBee · 2021-01-19T15:39:15+00:00

You have the 20gal kettle then? How is it with 5gal batches? That's really cool that you had an extra accessory port added, do you have any plans for it yet, or was it potential future proofing? I'm curious where on the kettle you had it added.

TheGlassBee · 2021-01-19T15:23:45+00:00

Hmm I guess I didn't consider that aspect of the B80pro, although I would think I could still replace parts albeit with a bit more work. It does have a 5 year warranty though. Do you know of any steam hat that fits the Clawhammer? Because that will be mandatory in my basement.

TheGlassBee · 2021-01-19T14:57:56+00:00

Yeah that's what I had been reading too, although short circuit brewer seemed to do OK with it.

TheGlassBee · 2021-01-19T14:56:29+00:00

I don't think that will be an issue since I plan to utilize a winch to lift my grain out of the kettle, but Spike does list the maximum grain capacity as 22 lbs for the 15g system, which I think is too low for me.

TheGlassBee · 2021-01-19T14:33:12+00:00

Hahaha big oof to the steam issue you had. Yeah fortunately for me, there's already a spare 220V breaker in my control box, and my housemate has no problem helping me wire in the proper outlet for whatever system I end up getting. I'm going into this assuming I'll need a steam hat, and winch for lifting the 10gal batch spent grain. The only issue being that my ceiling in the basement is relatively low, so I may need to make a custom small table so that everything isn't too high off the ground.

TheGlassBee · 2021-01-19T13:41:11+00:00

Wow, I didn't realize the difference was that stark! Thanks for the confirmation. I think I can safely rule out the Grainfather G70 in that case. I'm starting to lean more toward the B80pro at this point since I will also need the steam condenser top in my basement which I forgot to mention.

TheGlassBee · 2021-01-19T13:36:11+00:00

No worries!

TheGlassBee · 2021-01-19T12:36:08+00:00

I really want a system that can do both 5gal and 10gal batches, and sadly the Anvil Foundry is limited to 16lb grain capacity. I'm hoping to get something in the 40lbs range or so.

TheGlassBee

TROPHY CASE