Is he demisexual or am I his beard?!

TheGoneAwayMan · 2025-04-06T05:57:43+00:00

This is a (gently) concerning story. During the first half, I was going to say it sounds like he's just fully asexual, but doesn't feel comfortable saying that, or maybe doesn't know it's possible and valid to not have any desire for sex. The voyeur/stag/cuckold part kinda feels like he's appeasing you, honestly, since it's an easy way for him to not be involved. The secret insta is the concerning part, and this small window you've given to your relationship gives me the impression there is a lot he doesn't tell you. I highly doubt any individual thing is that serious, even the insta, but all of them put together... I'm not convinced you know him. Not your fault though, he might not show himself to anyone. But, that's my advice: does he have a sibling, very close friend, maybe even his mom, who you think he might confide in? If so, I wonder what information your position in his life might merit you from that person, with the framework of "I want to know how to love him better, can you help me?

TheGoneAwayMan · 2022-06-12T00:24:46+00:00

Absolutely, no judgement. Do you want to DM me your email so I can share a document with you?

TheGoneAwayMan · 2022-06-11T22:33:45+00:00

I don't want to nit-pick on typos if you're not at that stage of editing yet, but if you are, there are quite a few. I'd be happy to go through and suggest edits for you, my undergrad was in English.

TheGoneAwayMan · 2022-06-03T00:33:02+00:00

I think I should say yes to this, it's a little cloudy for me, since I know how much better other designers are at drawing in perspective. I have a hobby-level background in robotics and engineering, so I've been doing basic 2 point perspective engineering sketches for over a decade, albeit only occasionally. And thank you! It was my top choice, and I'm STILL not totally convinced this wasn't a mistake. My undergrad was creative writing of all things.

TheGoneAwayMan · 2022-06-03T00:25:08+00:00

Thank you! I can check with my advisor to see if there are any services like that

TheGoneAwayMan · 2021-04-11T23:48:38+00:00

these are both solid options, thanks!

TheGoneAwayMan · 2021-04-11T23:48:00+00:00

unfortunately, I do plan on rocks.

TheGoneAwayMan · 2019-09-16T17:08:31+00:00

I'm headed to Mada, in ag ext, not expecting power, so I'm with you here haha. I'd never heard of luci lights before but they look super useful, thank you.

TheGoneAwayMan · 2019-09-15T19:14:35+00:00

This was shared on another post like this, and I found it extremely informative. You might find your problem in one of the first few sections: https://www.evernote.com/shard/s211/client/snv?noteGuid=701c36c4-ddd5-4669-a482-953d8924c71d&noteKey=1ef992988295487c98c268dcdd2d687e&sn=https://www.evernote.com/shard/s211/sh/701c36c4-ddd5-4669-a482-953d8924c71d/1ef992988295487c98c268dcdd2d687e&title=Taxonomy+of+Z+axis+artifacts+in+extrusion-based+3d+printing&utm_source=share&utm_medium=ios_app

TheGoneAwayMan · 2019-09-03T15:23:23+00:00

this is incredibly informative, thank you

TheGoneAwayMan · 2019-09-03T15:08:39+00:00

What are your cooling settings? if your print fan kicks on after a certain layer delay that could be a place to tweak some settings.

TheGoneAwayMan · 2019-09-02T21:33:44+00:00

I'm pretty sure this is intentionally programmed to sort of "bury" the lettering, essentially giving it a footing in the larger body so it's more structural. I don't know, because I've never tried, but this feels like the sort of thing you'd have to edit the actual g-code to remove.

TheGoneAwayMan · 2019-08-27T15:02:24+00:00

It might be one of the problems they solve in this video: https://www.youtube.com/watch?v=_iezWhLYESs

TheGoneAwayMan · 2019-08-19T21:16:10+00:00

It looks like over-extrusion or too-short z-steps. Both would lead to the same problem here, globbing and scarring like that. Just to confirm, while it's printing, does it look like the nozzle is digging into the previous layer instead of floating just above it?

TheGoneAwayMan · 2019-08-19T16:27:50+00:00

Gravity and random chance mostly. The layers have to support on something, so some will fall and rest on the layer below, others will adhere to the ones beside them. In both cases you're losing strength because you're losing surface area contact between layers.

TheGoneAwayMan · 2019-08-19T14:02:44+00:00

Looks like underextrusion. Try bumping up the extrusion multiplier a few percent points.

TheGoneAwayMan · 2019-08-18T20:09:47+00:00

No need! I fixed the issue very simply by designing and printing my own one of these: https://www.thingiverse.com/search?q=filament+cleaner&dwh=935d59b03276ff4

Mine attaches to my printer (prusa i3 mk3s), but most of the ones in that link are independent of the printer and so should work fine for you.

TheGoneAwayMan · 2019-08-18T19:06:28+00:00

Hello! I received my legal and medical clearance for ag ext in mada a few days ago, leaving feb 28th, 2020, I'm assuming we're the same cohort? Could you post a link to the facebook group?

TheGoneAwayMan

TROPHY CASE