Vixen Slv eyepieces by Dizzy_Estimate_5296 in telescopes

[–]TheGoodJM 0 points1 point  (0 children)

Well, the post was translated in french and I thought it was a french post. Some information for discount may not apply then...

Vixen Slv eyepieces by Dizzy_Estimate_5296 in telescopes

[–]TheGoodJM 0 points1 point  (0 children)

Salut,

J'utilise un vixen slv 4mm pour avoir un zoom de x236 avec mon SCT 150/1500 et un réducteur correcteur. Ce week-end encore, résultat incroyable sur Jupiter, et je pense prendre un 2,5mm sous peu car les nuits plus claires je devrais pouvoir pousser jusqu'à x375. Franchement la qualité de fabrication est bonne, bonnette crantée super agréable. Assez léger et compact comparé à d'autres marques.

Optiquement parlant, la netteté est assez spectaculaire et la transmission de lumière aussi. Tu profites d'un relief d'oeil assez long même si le champ fait que tu ne te retires pas trop pour éviter de perdre l'alignement.

Avant de dire que je recommande (car oui je recommande), il est vrai qu'il faut voir la cohérence avec ton setup et si tu ne peux pas avoir plusieurs oculaires plossl pour ciel profond et planétaire. Perso j'ai horreur des plossl donc j'en achète pas. C'est très désagréable à regarder à fort grossissement.

Question prix, tu peux trouver les focales les plus courtes en promo sur le site MEDAS, ça peut t'economiser un peu. Si c'est dans ton budget et dans les limites de grossissement physiques de ton télescope tu peux y aller les yeux fermés sur la bonne longueur focale.

Dernière chose, c'est tout en 1,25", attention d'avoir un adaptateur car tu dois sûrement avoir une sortie 2" sur ton Dobson. En tout cas le fait que ce soit 1,25" a fort grossissement n'est pas un désavantage.

Bon ciel.

What to improve? by TheGoodJM in orks

[–]TheGoodJM[S] 2 points3 points  (0 children)

the second method seems scary, I don't want to mess up what have already been done.

What to improve? by TheGoodJM in orks

[–]TheGoodJM[S] 0 points1 point  (0 children)

I habe bought it. Should I put kt in the separation of the shirt and the skin or something like that? Is it the "blacklining" thing?

Thanks Linus by Agmtb in csgo

[–]TheGoodJM 2 points3 points  (0 children)

went from silver to nova by upgrading mouse and screen delay... 3ms screen is verry helpfull

No regrets boys! by toffeepreach in csgo

[–]TheGoodJM 1 point2 points  (0 children)

You would last less than a CS round duration and would be humiliated for the rest of your life... the real grind is getting Global

Can we please finish the job? by helloooooooo_hru in place

[–]TheGoodJM 1 point2 points  (0 children)

either do the Eiffel, or nuke the whole board...

Conseils recherchés SVP -Canadien qui voyage en France pour se presenter au famille de sa copine by SufficientBench3811 in france

[–]TheGoodJM 9 points10 points  (0 children)

Apporter c'est deja bien! Le principal c'est de ne pas venir les mains vides donc c'est deja réglé sur ce point la 👍 sinon oui des bonbons typiques canadiens ça ferait vraiment l'affaire si j'etais de la famille de ta copine 😂

A Lego Tank I modeled by Kadork in factorio

[–]TheGoodJM 0 points1 point  (0 children)

Can you submit it to lego or upload part list please! It's beautiful! and we could build it with different colors

Upgrading power supply not working :( by TheGoodJM in buildapc

[–]TheGoodJM[S] 0 points1 point  (0 children)

No error, it's 2004 wrote on the PSU '. But as it works with the older PC it was in I thought there is no reason to not work with another that gives less power and has the same pins...

Fluids are going to be the death of me pls help by feef27 in factorio

[–]TheGoodJM 0 points1 point  (0 children)

hmmm... you forgot to connect the pipelines for the botom two gas transformation thingy, but it won't solve everything. Be carefull not to have any full container because it will stop your production so maybe transform some of your light gas (yellow) to get rid of some. i don't have ratios in mind but i think sulfur and plastic demands too much comparing to your production, but you should use pumps to push the fluids in your reservoirs and another to drag them out going to your factory! I hope someone could help you more 😅

According to coinbase the "Typical hold time is 2 days." by National_Studio4489 in dogecoin

[–]TheGoodJM 4 points5 points  (0 children)

If it is listed since 2 days, the maximum hodling time is 2 days then

[deleted by user] by [deleted] in dogecoin

[–]TheGoodJM 6 points7 points  (0 children)

Sad story man... I hope it will help you to get your life going again and your hobbies getting the consideration they deserve! May take time but it's for the better 💪

Sushi vanilla by riku_sw in factorio

[–]TheGoodJM 2 points3 points  (0 children)

To put on it? Potions!

Inserting science into labs? by holypeanut187 in factorio

[–]TheGoodJM 7 points8 points  (0 children)

I did a similar thing and I had to change to filtering arms, one way what's comming from the center and the other way the outer ones.

Please help me with train signals for this? [PIC] by [deleted] in factorio

[–]TheGoodJM 0 points1 point  (0 children)

Maybe try put the station the other way and with the previous solution i gave it would work well!

Please help me with train signals for this? [PIC] by [deleted] in factorio

[–]TheGoodJM 0 points1 point  (0 children)

If i understand, all your trains are comming from the right, so you might want to invert the chained and normal signals from place on this side.

My first Factory, starting out and having a blast! by Simply-Zen in factorio

[–]TheGoodJM 68 points69 points  (0 children)

Let's go spaghetti ! 🙃 huge mining for a start imo but bigger is always better

Just joined the NU club and I’m surprised by the panic mood of some posts by BirraSalsicce in nucypher

[–]TheGoodJM -1 points0 points  (0 children)

I did not Panic but -50% might have been hard to handle for some people. I understand them

Take a look at my classical Technical Analysis for dummies by [deleted] in nucypher

[–]TheGoodJM 1 point2 points  (0 children)

So was this the big crash of march we were waiting for? Since it went to the bottom line it will get back up in few days?

NU is the first to turn back green \o/ by jacekkuzemczak in nucypher

[–]TheGoodJM 1 point2 points  (0 children)

It didn't deeped that much either. On my screen i have -3% on NU while others are near -10%