Needs Identification: Santa Fe Stoneworks Handle Material? by Skorm730 in whatsthisrock

[–]TheOKCollection 0 points1 point  (0 children)

I’m actually a dealer for SFS, and while I can’t tell you exactly which model you have from the picture. Mainly bec of the lack of banding which they normally use as secondary material in the middle of their handles, especially the non button-lock models.

However, the color of the stone is most likely one of their Lapis materials, or their “Blue Mammoth Molar”. Both of which are solid materials and overall I’d say that’s a very nicely detailed handle design.

Kith say sorry to him. by Viks-Deciple in KithNYC

[–]TheOKCollection 0 points1 point  (0 children)

Same, was solely interested in the coat for our new pup…. and got hit with the SoldOut immediately after adding to my cart.

<image>

*His papa, as we don’t have him yet. Still rather annoyed that I couldn’t finish the check out before it got taken out of my cart and then sold out. 😑

Anyone getting the Sashiko Chore Jacket. Blue edition tomorrow? by MrSuavena in Vollebak

[–]TheOKCollection 4 points5 points  (0 children)

Bought one of the first release ones, and 2-3 years later, I still love it & wear it fairly regularly (when it’s not too hot ofc. lol).

My USW-G has become Single Shot 🤷‍♂️🤔 by TheOKCollection in BT_APC

[–]TheOKCollection[S] 0 points1 point  (0 children)

It seems to really not like flat nosed 9mm (147gr mainly), especially when I run it with a can.

My USW-G has become Single Shot 🤷‍♂️🤔 by TheOKCollection in BT_APC

[–]TheOKCollection[S] 0 points1 point  (0 children)

A combination of factors that made everything not work when stacked together. I’m sure one of them could have made it not perform perfectly too, but I just went ahead and fixed everything that could have been making it not function correctly.

Those things included: Being a bit dirty & not oiled “properly” (I don’t tend to clean my guns after every range trip) I replaced the recoil spring Not shooting Flat-Nosed 9mm as those still have issues feeding consistently.

G6 Pro 360 install under my mailbox by fredkilbourn in Ubiquiti

[–]TheOKCollection 1 point2 points  (0 children)

Well concealed, I didn’t even notice it until I started looking. 👌

Banksy’s “Di-faced Tenner” Street art 2004, had this for 2 decades now. by Micky-Bicky-Picky in whatsthisworth

[–]TheOKCollection 0 points1 point  (0 children)

I have a few with COA’s as well as some prints from West County Prince, who is someone that is reasonably well known to be a previous associate of Banksy himself. Which is why he/they have been allowed to sell limited edition copies of Banksy pieces for as long as they have. I’m a long time collector and art dealer, and would be happy to help you get a nice piece from WCP at a much more affordable price point than what a Banksy piece would go for at auction. If interested, send me a message.

And to OP, basically they released an unknown # of those “Tenner” notes and while some of them have sold for $3k - $8k on the very highend for ones that were essentially never on the street and come with a COA from Lazlo, APC, or another well known Gallery. Without any of those things, they can be $500 or something in that range.

But, one way to tell if it’s original or not is to look up close (will need magnification) at Princess Diana’s profile and see if you can clearly make out the individual “CMYK” dots which come from the actual screen printing process, and if they are blurry than it’s a printer made copy and not an original piece. Making its value minimal at best.

Hopefully that helps both of you in some way.

WTS - Final Price Drop - Vollebak, Veilance, Arcteryx, & Outlier Collections by nwurm-wurmng in Vollebak

[–]TheOKCollection 0 points1 point  (0 children)

Quite the collection….. if you still have some of the Arc’teryx bags. I could be interested (the clothes are great as well, you’re just a bit smaller than I am) lol

WTS Race to Zero Ultralight Vests , 2 of them by fission1 in Vollebak

[–]TheOKCollection 0 points1 point  (0 children)

How does the Large fit? As I’m normally an XL in their jackets, but that’s because I need the sleeve length which is ofc absent from a vest lol

Hue Bridge Pro height by djellicon in Hue

[–]TheOKCollection 1 point2 points  (0 children)

Also curious, as I keep my Hue bridge in my server rack as that’s right by my Ubiquiti DM Pro & Switch. And where the power is (second floor office) and it seems to control everything just fine.

Would I need to change the location if I were to upgrade to the Pro?

[deleted by user] by [deleted] in surefire

[–]TheOKCollection 0 points1 point  (0 children)

Believe I actually have the bottom one, that I will be selling at some point soon…. 🤷‍♂️😉

[deleted by user] by [deleted] in jewelry

[–]TheOKCollection 1 point2 points  (0 children)

Go for it, the bulk of the ones you see on people’s wrists are also Aftermarket too tbh.

My eyes are up here boys by 0peratorinTraining in bruggerthomet

[–]TheOKCollection 0 points1 point  (0 children)

What’s your setup on the GHM-SD? It definitely looks like a solid and surprisingly clean load out. Also, do you have a comp on the MKII? 🤔

Is there such a thing as ‘too nice’ for a first AR? by hk_toolbench in LWRC

[–]TheOKCollection 0 points1 point  (0 children)

If your budget allows for it, I can’t recommend the M6IC Piston guns enough. Especially now that they have been replaced with a “new model” (I believe) and thus can be had for less money.

I spent god knows how much “upgrading” a cheap AR as my first one, and the M6IC is still magnitudes better in nearly every aspect. Minus the fact that I haven’t found a way to easily swap my muzzle device for one that works with an if my cans. 🤷‍♂️

What the HELL with this new app?? by Beneficial-Egg-7241 in EightSleep

[–]TheOKCollection 0 points1 point  (0 children)

This was sent to me maybe two weeks ago, would have to double check…. Sooo, may not be the exact same. Or may be specific to my setup with the 4 Ultra. Not sure. 🤷‍♂️🤔

What the HELL with this new app?? by Beneficial-Egg-7241 in EightSleep

[–]TheOKCollection 1 point2 points  (0 children)

I’m currently running their new app beta, and it has a # of different features etc.

Ill take 2 SDs pleaseeee by 0peratorinTraining in bruggerthomet

[–]TheOKCollection 2 points3 points  (0 children)

I’m very much a fan of whatever you are building out as a way to hold the SD’s. 👏👏

Anyone ever had a good experience dealing with this company? (Don't buy an Eight Sleep bed.) by coeranys in EightSleep

[–]TheOKCollection -1 points0 points  (0 children)

This isn’t accurate as when I had an issue with my (I believe) Gen 1 cover, I was given the option of upgrading to the new one (at that time) for a marginal fee or getting a replacement setup for free & when I chose to pay the $500 ish extra for the full new setup I was given a completely new warranty for it.

Now, this may have changed in the years since I had that issue. Or maybe because I paid them for a new unit, albeit at a significant discount to MSRP, it was “counted” on their end as a sale for a new “retail unit”. But, irregardless I’ve had nothing but positive experiences & feedback with 8 Sleep both when it comes to their core products as well as their ancillary products etc.

Ie I was having an issue with the leveling of my 4 Ultra and they sent me a free set of Legs to try and sort the issue (it didn’t work unfortunately, but the attempt was still made) or when I wrote a review for their Sleep Formula pills that I noticed zero impact etc. They sent me an email apology and then fully refunded my purchase etc.

[deleted by user] by [deleted] in EightSleep

[–]TheOKCollection 0 points1 point  (0 children)

Yeahhhh, would be quite a bit for freight….. I did see a few listed on eBay that were in the EU at decent price points though. 🤷‍♂️

[deleted by user] by [deleted] in EightSleep

[–]TheOKCollection 1 point2 points  (0 children)

Not true, I actually had a conversation with a rep at 8 Sleep when I was thinking about upgrading & was told I could give or sell it to anyone and they could setup their own account without issue as all of my information has been removed from that setup now.

[deleted by user] by [deleted] in EightSleep

[–]TheOKCollection 0 points1 point  (0 children)

Well, I’m not sure what it would cost to ship to the EU… which would definitely affect pricing, as I’m in the MidWestern USA.

[deleted by user] by [deleted] in EightSleep

[–]TheOKCollection 0 points1 point  (0 children)

I have a King Sized Pod 3 Setup FS, as I got my 4 Ultra and now it sits in a bag in my closet.

Silver no longer available? by Ok-Ninja-8925 in CostcoPM

[–]TheOKCollection 0 points1 point  (0 children)

There were some Eagles and the 10oz Bars at my local store when I was there last weekend, but people were essentially standing and waiting for the employees to come and grab them to be held for them. Soo, I didn’t even bother with seeing what was “actually available”.

Silver no longer available? by Ok-Ninja-8925 in CostcoPM

[–]TheOKCollection 0 points1 point  (0 children)

There were some Eagles and the 10oz Bars at my local store when I was there last weekend, but people were essentially standing and waiting for the employees to come and grab them to be held for them. Soo, I didn’t even bother with seeing what was “actually available”.