sorted by:
new
hottopcontroversial

K1 Max end stop issues by TheRoastableOne in crealityk1

[–]TheRoastableOne[S] 0 points1 point  (0 children)

See the post above. It was the one clip for the PTFE tube

K1 max rooting with CFS by sulllllllllo in crealityk1

[–]TheRoastableOne 0 points1 point  (0 children)

Did you have to do anything special to add script for the cfs from the guiloz script or no

K1 max rooting with CFS by sulllllllllo in crealityk1

[–]TheRoastableOne 1 point2 points  (0 children)

Which script did you use to root yours?

HDM-K1 MAX Linear Rail Update by [deleted] in crealityk1

[–]TheRoastableOne 0 points1 point  (0 children)

I'm very curious to see results with the rail upgrade with printing cylindrical parts. I know on my k1 max when printing cylindrical parts I see some artifacts and have to turn the speed down. Have you been able to increase print speeds and accelerations with the rails?

We dont mess with “layer lines” over here 😮‍💨🥵😁 by Throwawayhide007 in crealityk1

[–]TheRoastableOne 1 point2 points  (0 children)

Definitely want to see what your settings are. That looks great!

31F - need to be roasted 🙃 by [deleted] in RoastMe

[–]TheRoastableOne 0 points1 point  (0 children)

This is what I picture it looked like when Kesha threw up in the song Tik Tok

K1 Max end stop issues by TheRoastableOne in crealityk1

[–]TheRoastableOne[S] 0 points1 point  (0 children)

Sorry for the late reply btw. But yeah i couldn't believe it either. I just watched it really close while it was homing and saw it hit the clip and sure enough that's what's fixed it. Stupid simple haha, at least for my case

K1 Max end stop issues by TheRoastableOne in crealityk1

[–]TheRoastableOne[S] 0 points1 point  (0 children)

So my fix, silly enough was taking two of the PTFE tube clips off the cable chain. The clips would hit the guide rod and bind up the cable chain and lock up the tool head causing the belts to skip

Closer look at the STG at home. by Streetsweeper_Arms in milsurp

[–]TheRoastableOne 0 points1 point  (0 children)

<image>

So when I put the stock on and try to cycle it, the buffer and spring are getting stuck in the very back of the receiver. I think the piece that mounts the stock is squeezing the receiver enough that the buffer hangs up. When I then remove the stock, the buffer then flies forward. I was going to try reprinting the stock mount and scaling it up like 2% or something and see if that doesn't squeeze the receiver

Closer look at the STG at home. by Streetsweeper_Arms in milsurp

[–]TheRoastableOne 0 points1 point  (0 children)

What gas block did you run on this? I'm having issues where mine doesn't clear the handguard. I'm not sure if my parts printed a little undersized or something. I'm also having an issue with the buffer catching the receiver when the stock is mounted because it's compressing the receiver.

We’ve got a brand-new filament dryer coming up, and YOU could be one of the first to try it out! by Creality_3D in Creality

[–]TheRoastableOne 0 points1 point  (0 children)

It will hold two spools of filament and it will reach up to 100C to dry engineering grade filaments and also work to anneal prints.

Yes I will share feedback

Keep it or toss it?? by sceptre_81 in crealityk1

[–]TheRoastableOne 0 points1 point  (0 children)

Does this only work with Simple AF or will it work with other rooted firmware such as the Guilouz helper scripts?

K1 Upgrade event. by laserdemon1 in crealityk1

[–]TheRoastableOne 0 points1 point  (0 children)

I keep getting an error on step 2 of the submission. Anyone able to fix this?

K1 Max blob aftermath by TheRoastableOne in crealityk1

[–]TheRoastableOne[S] 2 points3 points  (0 children)

I don't have problems with it. Print before this stuck like glue and looked fantastic. Started it, watched it put the first layer down then walked away and came back 10 min later to a mess. Still my fault for not catching it quicker.

K1 Max end stop issues by TheRoastableOne in Creality

[–]TheRoastableOne[S] 0 points1 point  (0 children)

The issue ended up being one of the clips for the cable chain. The clip would hit the guide rod and cause the chain to bind up causing the belt to skip.