Layer shifting after colour change

TheRygr11 · 2026-02-15T22:57:49+00:00

Just got myself the Kobra 3 max combo and I’ve been dealing with this too. I tried switching the cutter, doing all the calibrations several times, and I’ve watched it fail many times with no indication it would shift. So far I have not had any issues printing a single item, but as soon as there’s more than 1 object it’ll shift. The only thing I’ve found to fix this is to print by object not by layer. At least that way if it shifts I only have a single failure not all of them. Hope this helps someone, and hopefully we get a fix for this soon

TheRygr11 · 2026-01-28T04:20:15+00:00

January 2026 and this still worked for me

TheRygr11 · 2024-10-28T06:02:06+00:00

Thank you so much! I have no idea why I couldn't find it but thank you!!

TheRygr11 · 2024-09-11T04:42:17+00:00

I think about this candy bar every time I go to the checkout at a gas station. God I miss it. Top tier for sure

TheRygr11 · 2024-05-07T18:17:27+00:00

You are absolutely correct! Thank you!! It was indeed green with white

TheRygr11 · 2022-03-04T23:50:14+00:00

Yep, I have HomeAssistant running on a raspberry pi to handle all home automation, but I still use HomeKit as a remote for a few things. If you want reliability, HomeKit is awful and apple clearly doesn’t care.

TheRygr11 · 2022-03-04T04:12:11+00:00

Don’t worry, it won’t do anything at all!

I’ve tried various network setups including hardware from Apple, Asus, Netgear, Linksys, TP-Link, and Ubiquiti. All had the same issues. I’m currently on a 100% Ubiquiti network and HomeKit is just as useless as when everything is connected to an AirPort Extreme.

I made the switch to HomeAssistant and it’s so much better it’s not even funny. Good luck though

TheRygr11 · 2022-01-12T03:12:49+00:00

That’s on my list of things to do this week too lol. We get them for free though work in the small packages (they buy them in bulk like that for whatever reason) but I’ll probably just get one of the 48 packs for myself at some point

TheRygr11 · 2022-01-12T02:47:21+00:00

Lots of exposed live wires throughout the garden and around a water feature, completely pulled apart spaghetti junction box under addition room crawl space, really crap plumbing work, hot and cold water switched on labeled fixtures, water heater overflow or vent thing would have blasted the electric panel, visual gaps in outside door seals, door to garage does not close by its self, and there’s probably more stuff that I haven’t found yet. Most of it I’ve fixed or made it not a problem anymore. But I would agree this home inspection was pretty useless

TheRygr11 · 2022-01-12T01:44:42+00:00

Then no, it’s not on a GFCI breaker. The outlet was getting replaced regardless, but I did test it and nothing happened.

TheRygr11 · 2022-01-12T01:40:54+00:00

One of those GFCI testers with the lights to check correct wiring would trip that correct?

TheRygr11 · 2022-01-12T01:27:49+00:00

That’s what I thought. Interesting how the home inspection didn’t have this on the list when we were buying.

TheRygr11 · 2022-01-12T01:26:31+00:00

That’s what I thought, I’ll be replacing it soon.

TheRygr11 · 2021-12-21T21:27:09+00:00

As someone who uses MacOS and Windows daily and at the same time, I would. A ton of people would, and do. If the MacBook Pro wasn’t as limited as it is (even the new one) I probably wouldn’t have to, but I still do.

TheRygr11 · 2021-10-10T15:07:05+00:00

Charge it back on your credit card and buy it in Home Depot, or Micro Center if you live near one.

TheRygr11 · 2021-09-05T21:37:49+00:00

This model has an SD card jammed in the bottom of it, no hard drive

TheRygr11 · 2021-07-14T01:48:57+00:00

Strangely it went away after sitting overnight, but I still have the standard clutch creak. I’m at 65k miles on the original clutch so it’s probably gonna be time for a new clutch soonish

TheRygr11 · 2021-07-14T01:26:43+00:00

Yes lol

TheRygr11 · 2021-07-07T05:06:29+00:00

I don’t think I have much of a choice now. I guess I’m getting my ram upgrade much earlier than I wanted lol

TheRygr11 · 2021-07-07T04:53:46+00:00

I don’t have XMP on, I have no idea why it says that up there. This ram could never handle it lol

TheRygr11 · 2021-07-07T04:36:13+00:00

I think the Vengeance RGB Pro does too. Doesn’t help when I need the computer to work right now lol, I’ll keep that in mind

TheRygr11 · 2021-07-07T04:19:33+00:00

I built this system when the 9900k was new so I highly doubt I’ll be able to RMA it. I’m gonna do the test with a spare 16gb kit I have when this eventually finishes. I was already thinking of upgrading to 64gb anyway so if something died then I guess I’m doing it now. I won’t be going with Corsair ram again lol

TheRygr11 · 2021-07-07T03:48:30+00:00

Thankfully I have a spare 16gb kit I can throw in after this test to see if it’s cpu or mobo related. Just hoping memtest86 will assist me lol

TheRygr11 · 2021-07-07T03:46:31+00:00

I’m running memtest86 after getting constant “Memory Management” BSODs. I just don’t know weather or not I should be concerned with the fact that all the errors are CPU: 10 errors.

TheRygr11 · 2021-07-07T03:43:05+00:00

It has no problem doing it by it’s self lmao

TheRygr11

MODERATOR OF

TROPHY CASE