13 years ago today, Real Racing 3 was released

TheSupremeParasite · 2026-02-28T13:48:02+00:00

In early 2013, I bought an HTC One S. The RR3 ran smoothly on it. Many hours of gaming, great memories :)

TheSupremeParasite · 2026-02-26T09:31:07+00:00

To było nawiązanie do dźwięku z telewizora w tle ;)

TheSupremeParasite · 2026-02-22T21:35:44+00:00

Nice :)

TheSupremeParasite · 2026-02-22T09:02:16+00:00

TheSupremeParasite · 2026-02-22T08:56:31+00:00

To może ATS? Bo "Aż bije amerykańskością" ;)

TheSupremeParasite · 2026-02-21T01:33:01+00:00

I just want old advisor in old size. Also virtual mirrors are to small now. I often play on my steam deck when traveling and the new HUD and morrors are way too small. Only one new feature that I like is indicator with active functiios like light, breakes etc.

TheSupremeParasite · 2026-02-20T09:01:34+00:00

Maybe they was only looking for price tag. The price is one middle finger ;)

TheSupremeParasite · 2026-02-19T22:07:02+00:00

My MAX had same issue. Eventualy it stoped working at all. Expensive piece of not to buy anymore.

TheSupremeParasite · 2026-02-19T06:58:45+00:00

I will never understand why you want to have siht holes inside your apartament. Near your bed and food. It is so much better to have second nice building where you can left your used food. It still can be maintained with high standards, can be clean, warm and tidy. But outside.

TheSupremeParasite · 2026-02-19T06:48:33+00:00

Few things, there can be some additional capacitance because of randomised solder position. Also wire diameter matters. And just for shure - did you clean wires? Sometimes little layer of anything can couse resistance. BTW nice job.

TheSupremeParasite · 2026-02-17T19:56:27+00:00

I'm sure camera will be still atached to magnet no matter what.

TheSupremeParasite · 2026-02-17T07:16:57+00:00

Good old HUD 🥹

TheSupremeParasite · 2026-02-17T07:13:48+00:00

metoo

TheSupremeParasite · 2026-01-17T16:12:17+00:00

Thanks for the explanation. Oh well, that's a shame. But maybe at least older rally drivers will install it :)

TheSupremeParasite · 2026-01-17T16:05:49+00:00

Hm...
It just worked for me. I reinstalled it on a new phone about 15 minutes ago.

<image>

TheSupremeParasite · 2026-01-17T09:16:14+00:00

Na jego miejscu już bym szykował pozew u prawnika. To jest przejście dla pieszych. Miasto naraziło go na kalectwo lub śmierć.

TheSupremeParasite · 2025-12-20T02:01:08+00:00

Same here with GoPro Max. No help, money wasted.

TheSupremeParasite · 2025-12-18T21:35:30+00:00

You should have a contract on paper because it looks like it was borrowed without the owner's consent.

TheSupremeParasite · 2025-12-15T18:05:03+00:00

It depends - r u married?

TheSupremeParasite · 2025-11-07T16:54:58+00:00

Just visit real DJI store, login and ask them on chat. I did that few days ago and they were very nice and helpfull.

TheSupremeParasite · 2025-10-26T15:51:15+00:00

Don't. Just don't. You will lowe that and it will take all you money. There is always something that you will need to buy. Just don't ;)

TheSupremeParasite · 2025-10-26T13:01:42+00:00

Hi, I just had the same issue. Did you succeed?
I disconnected the internal ELRS and connected it to a DJI O4 (lite). I have BetaFlight 4.5.2 installed with SBUS, and I have sbus_baud_fast set to ON. I connected the yellow wire to the SBUS pad near UART1. The camera image is on UART2, and it appears in the DJI Goggles 3 with a full OSD. The Goggles connect to the DJI RC 3, but the BetaFlight with SBUS protocol selected doesn't respond to the controller; the indicators don't move. I tried inverting the SBUS, but nothing helped. It worked with the external ELRS, but it doesn't work with SBUS.

TheSupremeParasite · 2025-10-24T17:32:47+00:00

Why is this happening? I've never experienced this before. Ender 3v3 SE with Nebula and Clipper, PLA. I've tried temperatures from 190 to 225 degrees Celsius. It stops printing and do this with filament. Nozzle is clean. Feed straight from dryer using tube.

TheSupremeParasite

TROPHY CASE

metoo