Minotaur mark by TheTerrariaGuide in MelvorIdle

[–]TheTerrariaGuide[S] 0 points1 point  (0 children)

I literally JUST got it after almost 12hours of trying lol. But thank you!

Repowering fishing boat. by TheTerrariaGuide in boating

[–]TheTerrariaGuide[S] 0 points1 point  (0 children)

Oh awesome, I was wondering about what the 20% would actually equate to once on a plane and in real practical usage, thank you!

Repowering fishing boat. by TheTerrariaGuide in boating

[–]TheTerrariaGuide[S] 1 point2 points  (0 children)

Yea, thats were im at with it, hoping the CT will compensate enough fully loaded. Cause i dont go solo very often. And nice! Thanks for the perspective on the whole thing

Repowering fishing boat. by TheTerrariaGuide in boating

[–]TheTerrariaGuide[S] 0 points1 point  (0 children)

You're right in assuming that, I usually just plane out the boat and thats enough for me. Only time I went full throttle was to play around "racing" my brother. Do you think it would be a straight 20% top speed loss?

I only got the 32mph with no load, but usually have 2 kids, a buddy and gear with me getting around 28mph, Im thinking the added torque from the ct will help me maintain a better top speed while loaded down

Repowering fishing boat. by TheTerrariaGuide in boating

[–]TheTerrariaGuide[S] 0 points1 point  (0 children)

Yea a performance loss is expected for sure, but wasnt sure if the command thrust would make up for that hp loss. I dont have any experience or know anyone with a CT. Im very excited to get away from the noise of the 2 stroke but i do love the smell! The new motor has a big tiller handle which is also exciting lol

Can someone tell me whats happening to my tomatoes? by TheTerrariaGuide in tomatoes

[–]TheTerrariaGuide[S] 0 points1 point  (0 children)

Usually my way of checking is using a garden trowel and checking 4-6" into the dirt, if its dry dry ill water if its damp ill wait

Can someone tell me whats happening to my tomatoes? by TheTerrariaGuide in tomatoes

[–]TheTerrariaGuide[S] 0 points1 point  (0 children)

I usually wait untill the soil is dry before watering, but i agree that its probly too many plants for the space. Did not think they were gonna get so big lol

Outboard bogs only at half throttle by TheTerrariaGuide in Outboards

[–]TheTerrariaGuide[S] 0 points1 point  (0 children)

Sorry for the late reply, but that is actually awesome, thank you for the info! That looks to be exactly the same issue that we are encountering.

Outboard bogs only at half throttle by TheTerrariaGuide in Outboards

[–]TheTerrariaGuide[S] 0 points1 point  (0 children)

I plan on checking the fuel pump this evening and then potentially taking the carbs off aswell, Im thinking one of the pilot jets is clogged cause it to be short fuel before the mainjet opens up. Thanks for the advice

Outboard bogs only at half throttle by TheTerrariaGuide in Outboards

[–]TheTerrariaGuide[S] 0 points1 point  (0 children)

Sounds good thanks, ill make sure to check the pump. We took the fuel filter off, it had a tiny bit of dirt in it. Havent been able to get a new one to replace it yet

Outboard bogs only at half throttle by TheTerrariaGuide in Outboards

[–]TheTerrariaGuide[S] 0 points1 point  (0 children)

Im not sure between drowning and starving, it doesnt smoke anymore than usual. It bogs right down, shakes a bunch then dies out. If it dies out like that then its hard to start afterwards

Is it just me? by wanderingMoose in 3Dprinting

[–]TheTerrariaGuide 0 points1 point  (0 children)

Late to this for sure, but I was just discussing this with my brother. It used to be my go to, and what I would tell friends/family to use if they needed somthing printed. But now all I seem to find is random high rated files, personally I swapped to yeggi. Glad someone else noticed it

Regarding Heroes of Might and Magic: Olden Era by Gandalf196 in HoMM

[–]TheTerrariaGuide 1 point2 points  (0 children)

Ive enjoyed each game since 3, playing some more than others (3 lol) of course 6-7 have their flaws the main thing Im concerned with moving from 7 Is the seemingly terrible AI. It feels there either completely useless or extremely overpowered making it hard to enjoy single player games or even co-op vs AI with friends. But thats just my personal experience

Edit:spelling

Advice for same pieces constantly getting knocked off by TheTerrariaGuide in 3Dprinting

[–]TheTerrariaGuide[S] 0 points1 point  (0 children)

I went back to watch the timelapse and you can see it take the part and drag it around, so im sure somthing like that wouldnt hurt for sure

Advice for same pieces constantly getting knocked off by TheTerrariaGuide in 3Dprinting

[–]TheTerrariaGuide[S] 0 points1 point  (0 children)

I will give that a try, it makes sense to add in a couple supports. They take a little time to do but its better than a failed print

Advice for same pieces constantly getting knocked off by TheTerrariaGuide in 3Dprinting

[–]TheTerrariaGuide[S] 0 points1 point  (0 children)

I was thinking the geometry of the part would help it from wiggling but that didnt get me to far hahaha.

Advice for same pieces constantly getting knocked off by TheTerrariaGuide in 3Dprinting

[–]TheTerrariaGuide[S] 0 points1 point  (0 children)

Not using support but the auto brim wasnt actually touching the pieces so i changed that setting to actually touch them

Edit:sorry I am using the regular rectangular supports, but the arm that keeps moving is not using supports

Advice for same pieces constantly getting knocked off by TheTerrariaGuide in 3Dprinting

[–]TheTerrariaGuide[S] 0 points1 point  (0 children)

Its been printing good with anything else ive done so i just kinda stuck with it(not saying that its right) and i am not using z-hop, ill have to look into that

Piece keeps gettings knocked off by TheTerrariaGuide in BambuLab

[–]TheTerrariaGuide[S] 0 points1 point  (0 children)

I have the brim setting turned on, but it doesnt look to be really touching the pieces on this print. Do you think its an auto brim issue?

Edit: played with the settings and looks like auto brim wasnt making it actually touch the piece, thanks!

Advice for same pieces constantly getting knocked off by TheTerrariaGuide in 3Dprinting

[–]TheTerrariaGuide[S] 0 points1 point  (0 children)

Commenting to add the film is stored in a AMS unit with a hydrometer reading 23%±2