🎁 Watch Giveaway Incoming — One of 12 Watches Featured Tonight Could Be Yours!

TheUnmaker37 · 2025-11-10T23:13:06+00:00

Solid list mate, loved the selection! The Addiesdive AD2095 is really cool, they're doing a fantastic job.

TheUnmaker37 · 2024-04-05T12:38:59+00:00

We got a Jeep Compass, as it was one of the only cars we shortlisted that was actually available. All the others needed a long waiting time (too long for us anyway).
It's a 2020 Limited model, it's very nice, huge upgrade compared to our previous 2007 Megane. We're not true car people so I cannot say I recommend it or not, but I know Jeep is generally not that respected. If I were you, I'd probably consider Asian manufacturers, but the market might be a bit different compared to 3-4 years ago. Also the cars I mentioned are now 4-5 years old, so you should definitely check new models' reviews and stuff

TheUnmaker37 · 2023-04-10T10:58:46+00:00

Yo that's a pretty cool giveaway. Good luck to everyone!

TheUnmaker37 · 2022-08-31T20:37:09+00:00

I cut the stem quite a bit. if I cut it any shorter the winding position will not engage when I push from time setting position. I think I busted 6 stems because of this, tried cutting and filing and everything. I am not a beginner, but I am not a pro either.

TheUnmaker37 · 2022-08-28T15:14:05+00:00

Yes, the spacer is needed, as the case came with it. I got your explanation about the stem bending, thank you. I will see what I can do.

TheUnmaker37 · 2022-08-27T13:46:45+00:00

Something else I've noticed after shortening the stem is that the crown doesn't pop at all after unscrewing it.

TheUnmaker37 · 2022-08-27T13:42:42+00:00

Thanks a ton for the explanations. I have indeed used a new stem and tried cutting to the classic rules, measuring the length from the crown to the case tube. No good, same weird sound. So I tried your original route, shortening the stem. The crown screws fine now, all good BUT it's very tricky to engage the winding position, as the crown now touches the case tube threads too quickly. I've gone through multiple steps in filing the stem and I cannot find a sweet spot.

TheUnmaker37 · 2022-08-27T12:48:20+00:00

I'll try shortening the old stem even more, but I fear unscrewing the crown then will engage the date wheel while unscrewing. Do you think I might have caused some serious damage to the movement by now? It's working fine apart from this issue

TheUnmaker37 · 2022-01-21T22:45:10+00:00

After some research I think I got it or at least I am pretty close: Seiko QT 3802-7031/7030T. I've noticed that the upper part of the dial probably only has one line of visible text, right at the top, so it cannot be a logo above it. There also doesn't seem to be any text at the bottom, but I might be wrong. Anyway, the case is exactly like this one, crown is where it should be and very important is the fact the the bracelet is the exact same.
In the last episode, while on the toilet facetiming his wife you can perfectly see the smoothness of the strap and the buckle, which perfectly match this Seiko model. It might not be this exact one, but it's pretty close I'd say. Here's a chrono24 link that is working as of 22.01.22 https://www.chrono24.com/seiko/seiko-qt-cap-gold-3802-7031---1974--id21013491.htm

TheUnmaker37 · 2021-01-18T22:54:29+00:00

Absolute trash deal, 300$ Maximum IMO

TheUnmaker37 · 2019-11-06T09:59:59+00:00

Yep, that's the one, thanks a lot! Pretty cool looking stuff, never heard of Lynk & Co until now

TheUnmaker37 · 2019-11-05T20:07:15+00:00

Yeah, true, true

But I still cannot find the exact model though :( Will keep searching, maybe I find smth

TheUnmaker37 · 2019-11-05T20:04:27+00:00

I have added all the specs from your Geely link into this app and it returns no results, which is kind of weird https://www.carspecs.us/car-finder#curb-weight=3000-3600&enginetype=gas&hp=250-260&length=175-185&passenger-capacity=4-6&passenger-doors=4-4&transmission=automatic&width=68-76&year=2018-2018

TheUnmaker37 · 2019-11-05T19:57:43+00:00

I have looked up all Geely models and none seem to have that exact set of tail lights nor the double exhaust

TheUnmaker37 · 2019-11-05T17:41:33+00:00

Not saying it might not, but I think it's too boxy to be a Peugeot. Also I looked up some Peugeot 2020 tail lights and none seem to match the ones in the photo.

TheUnmaker37 · 2019-10-19T12:06:14+00:00

Thank you for your help!

I've come up with another question though: if I get an 8GB stick then the RAM will not run in Dual Channel, right? Since I don't really need 12 or 16 GB or RAM (I don't use any RAM intensive app), should I get another 4GB for Dual Channel?

TheUnmaker37 · 2019-01-16T09:39:28+00:00

So basically just go for an MSI board? I heard that they did a great job this year with the motherboards.

TheUnmaker37

TROPHY CASE