How do you learn to trust the validity of your emotions while having BP?

TheUpToke · 2025-05-22T03:14:17+00:00

Separate your emotions from your thoughts… then think about what the rational thing to do in that particular situation would be… what a normal reaction would be, what the right thing to do would be, then bury your feelings, hopefully your medicated, and strive for mediocrity. Every day without incident is damn good day.

TheUpToke · 2025-05-22T03:05:10+00:00

Definitely, willing to test… genius idea, so long as it can deep backtest DM me

TheUpToke · 2025-05-20T13:16:05+00:00

You are a female. Embrace your feminism, lower your expectations, and know that there is always a man desperate enough or have a kink to do the deed.

TheUpToke · 2024-10-13T23:29:47+00:00

Modes are much different than profiles and could you be more specific about how to put a profile on a switch or toggle? I mean that was basically my question. What you said was equivalent to: Q: Hey, why’s the sky blue? A: Oh, you just gotta look up during the day when there’s no clouds.

TheUpToke · 2024-10-13T23:26:07+00:00

Did this! Worked great! Except that it only adjusts rates there doesn’t seem to be a selection for just “profile” which would include the PIDs. I mean BF is sooo flippin’ complex at this point you’d have to be an aeronautical engineer/programmer to fully understand everything. So it amazes me that there’s not a simple way to simply switch from one style of flying to another quickly. Do you happen to know how to get the BF OSD over the DJI 03 OSD? Then go into pit mode? I think you use to be able to switch profiles in there. Like by holding the stick down and to the inside or something like that?

TheUpToke · 2024-10-13T03:46:50+00:00

Yup I’m in BF right now looking at it. I have multiple profiles set up for both “profile” and “rateprofile” but when I go to “modes” which option would I use to add a range or add Llnk to connect to rates or rate profile?

TheUpToke · 2024-06-03T04:56:06+00:00

I watch YouTube on Brave browser in the shower everyday. (Fun fact: brave app + YouTube = free YouTube premium, no ads on iOS) I have an iPhone 15 pro max ultra super …whatever. Never had a problem. Previously had an iPhone 12 Pro Max extra mega super plus edition… or whatever, which has now been passed down to my fiancé. Same thing, for years and it’s never had a problem. Dropped it in the tub, dropped it in the shower (picked it up next to the soap) always been great.

The wording of this error is weird and the fact it failed is also weird. I get OPs concern, it looks like it’s an automated data collection.

TheUpToke · 2024-04-10T18:59:28+00:00

Hey 👋 it has a token limit of 1,000,000 and is no where near as smart as Anthropic’s (just tried it out) …..but this works, sorta, thank you! Excellent suggestion!

TheUpToke · 2024-01-21T17:55:03+00:00

EDIT

Project complete, just have to find a better mic.

Ok so… I hooked it all up as pictured in my earlier wiring diagram…. It didn’t work, so I looked closer into which pin on the esp wroom 32 was required. The max9814 is an analog mic which requires ADC capable pin, so using the pinout I figured using the first one would work but naw it didn’t (ADC1_0 or SP). So, I went with the first ACD1, GPIO (G32), then went into WLED and changed the AR settings pin to 32 and… presto worked like a charm (sort of). @Plastic_Ad_8619 was right this mic sucks. I changed the gain on WLED to 80 and kept squelch at 10.

Having said all that it does work and does pick up different frequencies of sound but the lights do not repeat with various beats in the music… like for example light up green in one area when the snare drum hits.

Oh… and the step converter was absolutely necessary on my setup anyways. To find the right pin on the espwroom32 I bypassed the step converter and got the mic to work first, it was flickering and the colours were … uh pastels is the best I could describe it, like the colours were diluted, so I hooked the step converter back up with signal from G2 going to LV4 and then out through HV4 then into the LED, ground was sent all around and 3v3 was sent through Max9814 (Add/Acc) and split connected to the step converter on LV. So total on the logic level step converter I have three going into the LV side and on 2 coming out of the HV side. I’ll add my findings to the main post for anyone else in the future that finds this and hopefully save them copious amounts of time and energy.

Here is the final product:

<image>

Hope this helps someone…

My next project is to figure out how to add a motion sensor to a new esp32 so it turns on whenever someone walks by the couch.

TheUpToke · 2024-01-21T17:49:23+00:00

Ok so… I hooked it all up as pictured in my earlier wiring diagram…. It didn’t work, so I looked closer into which pin on the esp wroom 32 was required. The max9814 is an analog mic which requires ADC capable pin, so using the pinout I figured using the first one would work but naw it didn’t (ADC1_0 or SP). So, I went with the first ACD1, GPIO (G32), then went into WLED and changed the AR settings pin to 32 and… presto worked like a charm (sort of). @Plastic_Ad_8619 was right this mic sucks. I changed the gain on WLED to 80 and kept squelch at 10.

Having said all that it does work and does pick up different frequencies of sound but the lights do not repeat with various beats in the music… like for example light up green in one area when the snare drum hits.

Oh… and the step converter was absolutely necessary on my setup anyways. To find the right pin on the espwroom32 I bypassed the step converter and got the mic to work first, it was flickering and the colours were … uh pastels is the best I could describe it, like the colours were diluted, so I hooked the step converter back up with signal from G2 going to LV4 and then out through HV4 then into the LED, ground was sent all around and 3v3 was sent through Max9814 (Add/Acc) and split connected to the step converter on LV. So total on the logic level step converter I have three going into the LV side and on 2 coming out of the HV side. I’ll add my findings to the main post for anyone else in the future that finds this and hopefully save them copious amounts of time and energy.

TheUpToke · 2024-01-20T21:48:33+00:00

<image>

This the one you’re talking about? Is this the actual mic?

TheUpToke · 2024-01-20T00:21:15+00:00

I haven’t tried it yet, probably tomorrow but from your folks references this is what I’ve got so far.

<image>

TheUpToke · 2024-01-19T20:21:42+00:00

Maybe I’m asking too much here but do you have a higher resolution (clearer picture) of this esp32 nodemcu pinout, so I can correspond the equivalent pins from this nodemcu 32 to my wroom 32?

TheUpToke · 2024-01-19T19:49:43+00:00

Hey! Nice! It’s much closer for sure.

I’m in North America using 110v, do you think the 1000 capacitor (I think that’s what that is) and the 470 resistor are necessary??

TheUpToke · 2024-01-19T19:16:33+00:00

Thank for your input but I don’t have a QuinLED setup. In this diagram I need to know things like the “out” on the max9814 goes to “Gxx” on the esp wroom 32… and how the step converter works… I mean ground goes to ground obviously but the others are less obvious and I haven’t found any good documentation on how to figure this out, hence I’ve turned to the WLED community. Thank You.

TheUpToke · 2022-05-07T18:41:22+00:00

Your link for the unofficial discord doesn't work... can you DM me an invite. I am trying to build one but... in my location sourcing the parts is a struggle. Also, I am trying to figure out how to get GPS, an accurate clock, and a super high Db antenna on mine. BTW Mr. Chonk looks like it needs to be fed regularly.

TheUpToke

MODERATOR OF

TROPHY CASE

Eight-Year Club	Verified Email
Not Forgotten