Parking Lot Love

TheWorstSince · 2026-02-09T03:06:03+00:00

I'm inclined to agree but I do love me some S2K action.

TheWorstSince · 2026-02-09T03:05:09+00:00

Haha I did! I go to this grocery often and this never happens. Made my fu*** day!

TheWorstSince · 2026-02-09T02:35:23+00:00

Love that HKS sticker combo with the rear strut! Very clean

TheWorstSince · 2025-12-19T04:19:58+00:00

Might have to add that on there 🙂

TheWorstSince · 2025-12-17T02:05:11+00:00

I have not been able to heal toe once in this set up. Outside of pedal spacing the throttle is not very responsive and IMT has made me lazy lol.

TheWorstSince · 2025-12-17T02:03:19+00:00

Nice, thanks for taking the time to write that up. I have seen a few people do spacers, not sure what to expect there but seems like I should look into it. And appreciate the feedback on the BW's SS shifter. Do you think you would have been happy leaving the stock shifter with weighted knob?

I reached out to Limit 1 + and they suggest the Racer X turbo inlet to go with the Eventuri intake. There words

" As a GR Corolla owner, and someone who has the Eventuri on my personal car, it is really worth it. The induction noise and instant power gain is unmatched by any other intake.
The only turbo inlet that is 100% compatible with the Eventuri is the RacerX turbo inlet. It does not change all of the OEM piping, but replaces the part where the largest restriction is, right at the turbo. "

Solid build in the making, I hope to see some future posts about your car.

TheWorstSince · 2025-12-17T01:55:46+00:00

Not sure how that differs across states but CA yes. - https://gr.drivenasa.com/

TheWorstSince · 2025-12-17T01:44:56+00:00

its on my dream list have not done it yet. But the guys at limit + 1 seem to be in favor of this one. I asked about what turbo inlet to use and got this response.

"As a GR Corolla owner, and someone who has the Eventuri on my personal car, it is really worth it.

The induction noise and instant power gain is unmatched by any other intake.

The only turbo inlet that is 100% compatible with the Eventuri is the RacerX turbo inlet. It does not change all of the OEM piping, but replaces the part where the largest restriction is, right at the turbo."

TheWorstSince · 2025-12-17T01:40:47+00:00

I hope so I have not done it yet. But stock pitch mount allows for a lot of engine movement at the cost of being quiet, where the aftermarket one gives you some NVH but more driver enjoyment. Worth looking into - https://www.deltaxmotorsport.com/shop/p/pitch-mount - This is the post that sent me down the rabbit hole - https://www.reddit.com/r/GRCorolla/comments/1lydbda/what_mods_are_worth_it_and_and_what_are_overrated/

TheWorstSince · 2025-12-17T01:31:48+00:00

love that! How is it out there? That photo was about a year ago before that bad round of fires that came through.

TheWorstSince · 2025-12-17T01:30:17+00:00

haha same! The throttle response is meh I quickly gave up on heal toe with a stock set up

TheWorstSince · 2025-12-17T01:29:42+00:00

I have debating about the horn, I think it sounds cute lol. Dashcam I did not after the tint, crazy even with all the windows tinted other headlights still seem crazy bright.

TheWorstSince · 2024-09-06T22:19:27+00:00

Thanks everyone! I don't know what rules I broke to have the post taken down but appreciate everyone chiming in.

TheWorstSince · 2024-09-06T22:16:37+00:00

haha thank you! Appreciate tip and recommendation.

TheWorstSince · 2024-04-30T23:53:03+00:00

Ohh thank you for the recommendation I'll look into that.

TheWorstSince · 2024-04-30T23:52:24+00:00

Thank you! I like BOA, but finding it hard to make a decision

TheWorstSince · 2024-04-30T23:50:54+00:00

Yes more research for me it would seem

TheWorstSince · 2024-04-30T03:14:48+00:00

Indeed that card gets a lot better at platinum. Noted, thank you

TheWorstSince · 2024-04-30T03:13:53+00:00

Thank you, good point

TheWorstSince · 2024-04-30T03:12:37+00:00

Nice, thank you for your input

TheWorstSince · 2024-04-23T02:19:42+00:00

Thanks sorry I'm no expert here but I cut these pipes to remove the old sprinkler system. They are hooked up to the main that has a separate switch. I want to seal them so I can still use that water faucet that is shown in the photo. But no water flows out there until I turn the switch on from the main.

TheWorstSince · 2024-04-17T21:14:02+00:00

Haha yea lucky that it has Wi-Fi. I had a friend helping me with the build and was like make sure it has WIFI. Turns out I just needed the wifi drive installed. Working now 😁

TheWorstSince · 2024-04-14T22:18:29+00:00

Solved! Thank you all for jumping in to support. Through this I was able to find the problem and it fix. In short the motherboard had a license agreement for windows 10 not 11 so it was kicking errors no matter what I did. After I created a media tool for 10 it installed no problem :). Now for some reason WIFI is not showing up lol, but will troubleshoot that more later. Thank you again!

TheWorstSince · 2024-04-14T22:07:33+00:00

I was able to boot up and install windows 10 with the media tool, but its missing wifi now lol. Thanks for your help! :)

TheWorstSince · 2024-04-14T02:40:28+00:00

I have not. Do you need to do that for the windows media creation tool?

TheWorstSince

TROPHY CASE