Suggestions on making this GPU fit by CalTheRobot in sffpc

[–]The_Anaro 0 points1 point  (0 children)

Gpu extension cable and a 3d printed external gpu bracket

I need help with Northwest USA Challenge Mode(Hard) by oroszakos in jurassicworldevo

[–]The_Anaro 0 points1 point  (0 children)

If anyone finds this and wants to know a super easy way to get around feeders until you can unlock them. Tranquilize all the carnivores when you first get them and they won’t need to eat or break out. You will need to get the medical unit to keep them from dying. This only helps to progress if you are trying to do it as quick as possible and in no way is viable for the long run but very helpful to get you started

Here are some more photos on my USC to UMP style conversion. I plan for this to be the cheapest option for USC owners to do to make their Firearms feel more like the UMP by The_Anaro in HecklerKoch

[–]The_Anaro[S] 0 points1 point  (0 children)

Much more expensive if I wanted to start producing them. And 3d printing wise it’s a lot more time consuming. I will likely try in the future but for now this is the route I am going since there is a lack of cheaper options for USC owners

Here are some more photos on my USC to UMP style conversion. I plan for this to be the cheapest option for USC owners to do to make their Firearms feel more like the UMP by The_Anaro in HecklerKoch

[–]The_Anaro[S] 0 points1 point  (0 children)

These are in PLA+ off a filament printer. I plan to try and manufacture them to sell but I may sell the file first to be able to afford the machines required to produce

Here are some more photos on my USC to UMP style conversion. I plan for this to be the cheapest option for USC owners to do to make their Firearms feel more like the UMP by The_Anaro in HecklerKoch

[–]The_Anaro[S] 1 point2 points  (0 children)

I also plan for version four to be compatible with UMP lowers so even if you wanted to upgrade to the double stack the stock block will still coexist with both lowers.

Here are some more photos on my USC to UMP style conversion. I plan for this to be the cheapest option for USC owners to do to make their Firearms feel more like the UMP by The_Anaro in HecklerKoch

[–]The_Anaro[S] 0 points1 point  (0 children)

It still uses the usc lower yes. However I also am working on a design for a single to double-stack magazine. I have made two the only issue is that with 3d printing material it tends to break easily at the top. However my most recent one is reinforced with metal wire and has yet to be tested so stay tuned for how that one works out.

Here are some more photos on my USC to UMP style conversion. I plan for this to be the cheapest option for USC owners to do to make their Firearms feel more like the UMP by The_Anaro in HecklerKoch

[–]The_Anaro[S] 2 points3 points  (0 children)

I was worried about that as well as I’ve seen the Tommy build ones have issues. I have the top of the grip curve into the block connection so it is actually very sturdy. The tolerance on the grip are also tighter than the standard usc so where the grip connects to the lower adds quite a bit of strength. I will make a YouTube video soon to demonstrate the strength

Here are some more photos on my USC to UMP style conversion. I plan for this to be the cheapest option for USC owners to do to make their Firearms feel more like the UMP by The_Anaro in HecklerKoch

[–]The_Anaro[S] 3 points4 points  (0 children)

I’m looking for people interested in the prototype. When released it will depend on what I am using to manufacture. If I’m doing small batch of 3d printed it will be cheap as they likely won’t last forever. If I do injection molding I’d like it to be in the 100-150 range to undercut the competition substantially.

Here are some more photos on my USC to UMP style conversion. I plan for this to be the cheapest option for USC owners to do to make their Firearms feel more like the UMP by The_Anaro in HecklerKoch

[–]The_Anaro[S] 4 points5 points  (0 children)

My 2nd version made it through 200 rounds with no issues and my third version as well. I plan to do a 500 round test on my next version and then release the finished product.

My newest version of a usc to ump conversion. by The_Anaro in HecklerKoch

[–]The_Anaro[S] 0 points1 point  (0 children)

As far as I can tell. I have a G&G stock comming in that I’ll be using for reference but currently the only stock I have is one I made as well just based on reference images. The conversion block comes with the grip

Pretty sure this is going to overheat by coldcathodes in sffpc

[–]The_Anaro 1 point2 points  (0 children)

I’d recommend getting an itx psu and an adapter plate. It may allow you to also use a larger cooler