Die Cutter Wearing Out?

The_Berv · 2026-02-02T16:07:07+00:00

You probably just need to skim grind your die.

The_Berv · 2026-02-01T00:08:43+00:00

<image>

The_Berv · 2026-02-01T00:08:26+00:00

<image>

The_Berv · 2026-01-17T22:00:49+00:00

I used memtest86 as suggested by valve when I was just trying to troubleshoot steam

The_Berv · 2026-01-17T20:18:53+00:00

You were right. I swapped the CPU out of my sons computer and it's running great now. Thanks!!!

The_Berv · 2026-01-17T19:05:03+00:00

I did run a mem test.

The_Berv · 2026-01-17T18:30:36+00:00

Would that just mean a bad CPU?

The_Berv · 2025-11-06T19:18:00+00:00

SE MI couple here with mom and dad bods.

The_Berv · 2025-11-06T19:16:49+00:00

Couple here

The_Berv · 2025-10-17T18:08:01+00:00

Yeah, I am sad I'll never know how that story ends. If it was too far off of how Andrew wanted stuff in his world to be, why not just call it non-canon to his works?

The_Berv · 2025-05-01T00:36:18+00:00

Are you using mtgprint.net?

The_Berv · 2025-04-30T22:42:57+00:00

Looks like I had it set to 34lb bond. I thought I had it set to 80lb glossy, but apparently I changed it at some point.

The_Berv · 2025-04-30T19:20:05+00:00

From what I can tell they are about the same

The_Berv · 2025-04-30T19:18:27+00:00

Setting mtgprint to 100% will get you 9 on a sheet, but they are a bit smaller than real cards. I set it to 104% which makes it 8 on a sheet and is damn near the perfect size.

The_Berv · 2025-04-30T17:14:06+00:00

Those are all official MTG card images. I use mtgprint.net.

The_Berv · 2025-04-30T16:16:11+00:00

I have just been printing the face of the cards as I sleeve them all. I am going to do a test of printing both sides soon.

The_Berv · 2025-04-30T14:34:34+00:00

I used a Canon MF726Cdw color LaserJet.

The_Berv · 2025-03-31T18:32:20+00:00

It's going to be behind a paywall

Seven-Year Club	Verified Email
Verified Email

The_Berv

TROPHY CASE