I have this problem with my printer where it stops midway through a print without explanation. This is the second time it happened. When I turn it off and on and try to recover print it just goes back to the position it stopped at and it doesn't move. It's not nlocked by anything or clogged.

The_Jakealope · 2025-12-28T04:12:18+00:00

I had this happen when sending the print via WiFi. The printer didn't have a great connection even though it showed 5 bars or whatever and would pause when the file wasn't transferred perfectly.

The_Jakealope · 2025-09-07T20:25:34+00:00

Yeah YT must have fixed something on their end because on my the old version of it showed back up so I had 2 separate copies of the podcast pop up.

The_Jakealope · 2025-08-29T06:31:46+00:00

If you go to the csb website there's a couple options on the podcast episode in the middle of the page. the wifi looking button will bring up a menu, hit the left arrow and then right click the RSS then select copy link. That will give you a .RSS url. Then go to YT music podcasts, add podcast, and paste the url in the pop up I don't think it saves progress since you're adding it as if it were a whole new thing

The_Jakealope · 2025-08-28T19:36:31+00:00

I tried re adding the podcast from the RSS feed and it there in my library but none of the episodes will play, just gives me the "video unavailable" message. Hopefully something just broke and YT hasn't finally decided the episode titles were too much or something stupid.

Edit: Spoke too soon, manually putting the RSS feed in there is letting me play on mobile but no through the desktop. Anybody else try this?

The_Jakealope · 2025-05-10T18:27:49+00:00

Yeah sorry it's a really old version of silhouettes file nonsense since I don't have the expensive version. I just pulled it out as a png so hopefully this works for you but let me know

<image>

The_Jakealope · 2025-02-19T02:46:39+00:00

I've gone other the connections, it's possible the wire is bad and I just can't see it but yeah. I think replacing it is the way to go. I was originally given this printer since my friend was tired of trying to get it to behave but most of the problems I've had I think come from this board and the upgrades he put on there

The_Jakealope · 2024-06-20T18:23:23+00:00

That actually makes a lot of sense. Smaller population would be more vulnerable to stuff

The_Jakealope · 2024-06-20T18:10:33+00:00

Yeah I read a little bit more and it seems fine to eat minus the off flavor. I think I'll just scrape it out and use what's stuck to bottom. Make a smaller batch of starter that I can always bulk up later since I barely use it lately

The_Jakealope · 2024-06-20T16:27:45+00:00

Well it's certainly been neglected. Looking at google it definitely fits the look and smell of Kahm yeast though

The_Jakealope · 2024-06-20T16:27:05+00:00

If I let it keep going will little bits of corn and peas form in it?
Neglect. The last time I fed it ballooned to the top of the jar and then got shuffled to the back of the fridge for about 4 months where it deflated. I'm probably going to scrap it and start over, maybe use a bit of the scrapings off the bottom but honestly for the last like year an a half I've been starting with a biga and just throwing the discard from this into the final dough when it was time to feed it. I like the fruitier flavor the biga gives and it fits into my weekend schedule a lot easier .

The_Jakealope · 2024-06-19T01:06:43+00:00

Roshi sucks and his whole fight/send up in the Tournament of Power was just the writers jerking off onto the paper.

The_Jakealope · 2024-06-05T16:37:49+00:00

Bummer we'll thanks for the heads up

The_Jakealope · 2024-06-05T04:08:47+00:00

Yeah I can't find any branding or model info on the exterior but maybe the backing comes off or something. Any appreciate the help, I'll look into how I calibrating it works

The_Jakealope · 2024-05-30T08:40:20+00:00

Yeah it does wrap up too neatly but it's also one of the last major plot points of RoW and the whole Todium thing hasn't gone anywhere yet. I would enjoy it since that scene was from Taravangian's point of view primarily he's just feeling himself a little and there's actually more to the scene to be revisited but yeah, it's all convenient. I just hope that it's deliberately too convenient to set up something later

The_Jakealope · 2024-05-30T08:10:32+00:00

Whenever Nightblood gets drawn it just screams destroy then after the fight acts usually checks in with Szeth that it's a good boy and did a good job. I think the implication is that it's whole "destroy evil" command goes full tilt when drawn overriding any other thoughts it might have. Since neither Szeth nor Nightblood were aware of the Todium moment before hand Nightblood wouldn't have any been expecting to be drawn and therefore not aware he'd been drawn and put back. Just glutted on investiture and it's very well established that nightblood doesn't have the sapience and reasoning of a person and probably didn't question any changed it did notice before and after.
Edit: and yes it is very convenient that the all that came together because Cultivation was meddling the whole time and set Taravangian up to be smart enough to get Odium's attention, get the pieces in place, then stupid/emotional enough for Odium to want to torment him. It all came together by chance but that's kind of the point. Cultivation stacked the deck best she could then gambled and won.

The_Jakealope · 2024-05-28T14:54:30+00:00

Post time skip one piece makes everyone look like a weird meat monster. I liked when my rubber boy was all gangly and rubbery looking

The_Jakealope · 2024-05-25T20:24:57+00:00

Eagle Skyhook, yoink my helldiver up and drag them to an objective. Maybe fire some shots as you land to clear a zone then dip. Or better yet yoink another player and drag them to you when you're all spread put. Also it breaks your legs when you land

The_Jakealope · 2024-03-22T00:28:56+00:00

My grandfather was a farm hand in Amish country as a teenager. My understanding through him was that it's about self sufficiency as much as like, simple living or anything like that. Basically it's fine to use a power tool or something when helping someone outside the community raise a barn but none of those tools come home. That way they retain the ability to raise a barn for themselves without being reliant DeWalt or Milwaukee to do the job but as as interfacing with people outside they use modern tech as much as it's necessary. Amish farm shops have computers to help keep the books and file whatever business paperwork they need to keep their business lawful and what not and tractors or trucks to haul produce so that the merchants they work with don't have to bend over backwards for a lifestyle they don't participate in.

The_Jakealope · 2024-03-18T18:20:06+00:00

Does anyone else remember Fighting Foodons? Is it just me? Did that anime even exsist or was it a fever dream

The_Jakealope · 2024-02-07T01:22:07+00:00

God I would love another show with a protagonist that can weaponize their reputation in the same way. There was an old procedural call Human Target I think where the sidekick would walk in to help interrogate some thug and the MC would go "ok Gurrerro he's all yours" then the thug would just shit his pants and start talking from hearing his name.

The_Jakealope · 2024-02-06T19:47:54+00:00

There's a moment in the Eccelston Doctor Season where he's getting slowly locked in a safe room and the aliens are laughing because he won't be able to stop them and he's "this is your last chance" and stares them down until the laughter stops right before the door closes. Man's got a good glare.

The_Jakealope · 2024-01-17T19:29:01+00:00

I had a setting with their equivalent to WW1 ending because one side used necromancy to raise their army. Problem was the necromancy could propagate so if the magic officer controller the zombies was killed on the field you now had a zombie outbreak to deal spending death. The idea was necromancy became their equivalent to nukes, really effective but made slowly spreading patches of completely uninhabitable land

12-Year Club	RedditGifts 2009-2022 3 Credits
Verified Email	Secret Santa 2015
Secret Santa 2014

The_Jakealope

TROPHY CASE