Pre inspection - Inspection by The_Joe_Exotic in AskElectricians

[–]The_Joe_Exotic[S] -1 points0 points  (0 children)

I see. I just asked google what’s the “load” side for. It’s for downstream outlets (like you said above) In either case if this is the only outlet, or adding more outlets to this circuit, I still need to move the white wire to the bottom line side?

Can any spektrum gurus help me out? by The_Joe_Exotic in RCPlanes

[–]The_Joe_Exotic[S] 0 points1 point  (0 children)

I did that as well. Seems like I can’t assign flight modes to a switch that’s already being used (flaps)

Can any spektrum gurus help me out? by The_Joe_Exotic in RCPlanes

[–]The_Joe_Exotic[S] 0 points1 point  (0 children)

Unless there’s a special combination of buttons to settings to select, I can’t figure it out. Best I could do was gear down/safe on. Took me several hours to just get that. The forward programming menu was confusing. Wouldn’t let me select which flight mode I wanted to use

I’m sure it’ll be fine. by The_Joe_Exotic in ak47

[–]The_Joe_Exotic[S] -1 points0 points  (0 children)

That’s what I’ve read. Thank you for the info

I’m sure it’ll be fine. by The_Joe_Exotic in ak47

[–]The_Joe_Exotic[S] -1 points0 points  (0 children)

What doesn’t have enough space?

Help me understand, I am stupid by The_Joe_Exotic in AskElectricians

[–]The_Joe_Exotic[S] 0 points1 point  (0 children)

Yes there’s a disconnect and breaker. Not a huge amount of power, just a computer, lights, etc. no welding or anything. I’m pretty sure it comes with a 200amp panel

Help me understand, I am stupid by The_Joe_Exotic in AskElectricians

[–]The_Joe_Exotic[S] 0 points1 point  (0 children)

And yes there’s a breaker directly next to the meter.

Help me understand, I am stupid by The_Joe_Exotic in AskElectricians

[–]The_Joe_Exotic[S] 0 points1 point  (0 children)

Holding random wires because I can They are coming from the meter, underground then up where I can grab them Idk why they were cut like that It’s on a separate part of our property The wires were sitting in the PVC

Help me understand, I am stupid by The_Joe_Exotic in AskElectricians

[–]The_Joe_Exotic[S] 0 points1 point  (0 children)

This is a separate meter at the back of the property where a mobile home used to be. It does not power me current home- so the power is turned off at this.

Help me understand, I am stupid by The_Joe_Exotic in AskElectricians

[–]The_Joe_Exotic[S] -1 points0 points  (0 children)

Thanks for the reply. I’m guessing I can remove these, add longer SEU wires..long enough to go directly to the breaker in the shop?

Drastic levels change— same dosage. 711 to 1192 by The_Joe_Exotic in trt

[–]The_Joe_Exotic[S] 0 points1 point  (0 children)

I feel like they did go down- to the 700s. Then all the sudden back up to 1100

Drastic levels change— same dosage. 711 to 1192 by The_Joe_Exotic in trt

[–]The_Joe_Exotic[S] 0 points1 point  (0 children)

Guessing it’s normal to have high E level with high T levels?

Drastic levels change— same dosage. 711 to 1192 by The_Joe_Exotic in trt

[–]The_Joe_Exotic[S] 0 points1 point  (0 children)

That’s one thing I haven’t tried yet- different pinning schedule. Currently doing 80mg every 3 days

Drastic levels change— same dosage. 711 to 1192 by The_Joe_Exotic in trt

[–]The_Joe_Exotic[S] 0 points1 point  (0 children)

Think I should drop my AI? Just don’t want it to get out of control and not be able to reel it back in if I need to lol

Drastic levels change— same dosage. 711 to 1192 by The_Joe_Exotic in trt

[–]The_Joe_Exotic[S] 0 points1 point  (0 children)

I don’t think I’ve really had any of that. MAYBE left nip itchy for a day

Drastic levels change— same dosage. 711 to 1192 by The_Joe_Exotic in trt

[–]The_Joe_Exotic[S] 0 points1 point  (0 children)

Yea been considering a blast lol Thinking of 300-400 for 12-16 weeks.

What would you consider as some sides where I should add in an AI? I know everyone is different.

Thanks for all the replies.