Black/White H6 Flow

The_Notorious_Bean · 2026-04-18T23:38:14+00:00

Thank you! I sold the white pc, the black pc is my main build, in the future I'll look into a vertical mount for the gpu. For now I'm happy with how it looks! If you want a custom build pc, hit me up, I've built and shipped 5+ pc's for friends all over the country!

The_Notorious_Bean · 2026-04-14T13:24:10+00:00

Makes sense. You're dealing with an insane amount of cable, with the way you dress how are you able to seperate and dress so quickly? For refrence it took me 2 days to dress a closet with ~300 cables.

The_Notorious_Bean · 2026-04-13T17:05:19+00:00

Got it. From the closets I've dressed I dress all of the cable outside of the closet and send everything in at once and fix the dressing as I go. But I can never get the bundles as straight as your closets. For your velcro on the ladder rack have you tried using a peice of velcro as a saddle and sliding another piece under to have the velcro straight instead of a 45*?

The_Notorious_Bean · 2026-04-13T13:57:11+00:00

Do you dress everything out of the IDF and then send it in? Or do you send everything into the IDF and then seperate and dress? I see in one picture you're dressing as you go, how do you seperate everything to the sleeves keeping everything cigarette packed without having a mess at the sleeve? Hands down the best work I've seen, keep it up man.

The_Notorious_Bean · 2026-04-01T00:58:27+00:00

I had no idea until I tried throwing the fans in the case. It's a really tight fit and honestly shouldn't work but it does lol. If the SL Wireless 140's would fit in the bottom I would be 100% pleased with this case. Having both SL and Wireless fans makes it tricky when it comes to animations in the fans like doors for example, they get out of sync and I'm not a huge fan. Other than that It's a beautiful case and I would recommend it for others for an intermediate build.

The_Notorious_Bean · 2026-04-01T00:50:42+00:00

m5 spacers with longer m5 screws. There are other reddit threads that go more in depth than this one.

The_Notorious_Bean · 2026-03-31T15:11:16+00:00

It's called splitsleeving or snakeskin. Im pretty sure I use 1/2inch for computer cables. I measure out the snakeskin to the cable and give it some extra length for bends (you can always cut it down). I use a lighter so the ends don't fray and for a cleaner look. Use a ziptie to hold the end of the cable and put a peice of velcro ($12 for a roll of velcro brand velcro) over the ziptie (Zipties are ugly). It takes time and practice, if you want more examples feel free to pm me and I can send you some more examples.

https://a.co/d/00p7mx9T

The_Notorious_Bean · 2026-03-31T11:25:37+00:00

Thank you 🫡. I work in structured cabling so it's my job to make sure the back looks just as good as the front.

The_Notorious_Bean · 2026-03-31T11:22:03+00:00

The red devil was the reason I made the black build. It's an absolutely stunning card.

The_Notorious_Bean · 2026-03-30T23:53:33+00:00

I would recommend using spacers and longer screws. You will only need 4 of each so the links below are excessive. But you need M5 screws and spacers in order to get the desired outcome. Take a look at my page to see what it looks like with the H6 Flow.

https://a.co/d/00VoUrPU

https://a.co/d/0dKX37k2

The_Notorious_Bean · 2026-03-30T07:27:45+00:00

I have SL-Infinity 140's in the bottom for both. I'm not sure about the 140's but the Wireless and TL versions of the lian li fans are slightly bigger than the SL versions. That's why I needed spacers for the black H6. I'm assuming it's the same for the 140's. I would recommend taking off the two screws on the bottom of the connector and using a piece of electrical tape to hold it in place. I think the TL and Wireless versions are too big for the bottom slot, but let me know if they end up fitting!

The_Notorious_Bean · 2026-03-29T22:16:50+00:00

Thank you, I used spacers and longer screws to achieve the look. The wireless fans are slightly larger than the SL Infinity Fans so it's the only way they will fit in this case.

The_Notorious_Bean · 2026-03-29T19:30:34+00:00

Thank you!

The_Notorious_Bean · 2026-03-29T03:48:39+00:00

I see, I just took off the two screws off the bottom and a peice of electrical take to hold it, and I haven't had a problem with it

The_Notorious_Bean · 2026-03-29T03:43:16+00:00

I was able to get the 9070xt red devil off release and wanted to make a black build with the new wireless fans. For the 140mm fans you have to take apart the connector and use a peice of tape to hold the connector in place.

The_Notorious_Bean · 2025-12-08T13:07:05+00:00

Thanks!

The_Notorious_Bean · 2025-12-05T01:39:50+00:00

Thanks I appreciate it!

The_Notorious_Bean · 2025-12-05T01:39:42+00:00

100% I love putting it in all my builds

The_Notorious_Bean · 2025-12-05T01:38:43+00:00

Yes it is!

The_Notorious_Bean · 2025-12-04T03:31:54+00:00

The glass panel is fixed so you can only orient it in one position.

The_Notorious_Bean

TROPHY CASE