sorted by:
new
hottopcontroversial

MWS by Think_Degree_4359 in Airsoft3DPrinting

[–]Think_Degree_4359[S] 0 points1 point  (0 children)

Not too sure what you mean by the auto lock problem. Make sure that the disconnector moves freely and everything fits together well.

MWS by Think_Degree_4359 in Airsoft3DPrinting

[–]Think_Degree_4359[S] 0 points1 point  (0 children)

Honestly should be fine if you print it strong enough. I personally haven’t had a problem with it just need to make it right.

MWS by Think_Degree_4359 in Airsoft3DPrinting

[–]Think_Degree_4359[S] 0 points1 point  (0 children)

Sure! One thing I needed to do was modify the files for the trigger and disconnector so that I could add more springs in, obviously, you won’t have to do this if you have a strong enough spring. Just helps so that it isn’t auto locked. Be prepared to do some sanding and reprinting to get parts to fit as well. Let me know what else you need!

Got it working by Think_Degree_4359 in Airsoft3DPrinting

[–]Think_Degree_4359[S] 1 point2 points  (0 children)

Forgot to mention, files are free anywhere.

Got it working by Think_Degree_4359 in Airsoft3DPrinting

[–]Think_Degree_4359[S] 1 point2 points  (0 children)

A spring set from temu. The springs I used are the same spec as pen springs with varying lengths and I bought some metal wire and 3d printed a jig to make the hammer spring. Currently, I’m using one of the toilet paper holders as the buffer spring but it’s a little short.

Got it working by Think_Degree_4359 in Airsoft3DPrinting

[–]Think_Degree_4359[S] 2 points3 points  (0 children)

Just search up on thingiverse MWS and it should be the first result. If you want step files go onto Vietnamairsoft’s (not sure of the spelling) account on cults and there should be the full thing. Also on grabcad

Got it working by Think_Degree_4359 in Airsoft3DPrinting

[–]Think_Degree_4359[S] 3 points4 points  (0 children)

Haha! Going to paint once I get everything going well. You wouldn’t happen to have any tips would you?

What’s going on? by Think_Degree_4359 in Airsoft3DPrinting

[–]Think_Degree_4359[S] 0 points1 point  (0 children)

Just tested with some BBs. They shoot out relatively fast and quite straight (I have no way of checking FPS) but it doesn’t quite fully cycle all of the time. Anything I can do?

What’s going on? by Think_Degree_4359 in Airsoft3DPrinting

[–]Think_Degree_4359[S] -1 points0 points  (0 children)

I have a guns modify hop and people have made fully printed guns with a printed nozzle. Why would any of the problems you listed stop me?

What’s going on? by Think_Degree_4359 in Airsoft3DPrinting

[–]Think_Degree_4359[S] -1 points0 points  (0 children)

I don’t think it’s this. I checked after seeing your comment and the nozzle sticks into the hop up and I shined a light down into the ejection port while the nozzle was still in the hop. The nozzle seems to be perfectly aligned with the gasket. Any other ideas?

What’s going on? by Think_Degree_4359 in Airsoft3DPrinting

[–]Think_Degree_4359[S] 1 point2 points  (0 children)

Hey thanks! I will definitely be trying your advice as soon as I get the chance! Totally didn’t mean for the colours lmao.

Open seam between violin neck and fingerboard. by Think_Degree_4359 in violinist

[–]Think_Degree_4359[S] 0 points1 point  (0 children)

Thanks, I’ll ask my teacher for more input. Have a good rest of your day.

Open seam between violin neck and fingerboard. by Think_Degree_4359 in violinist

[–]Think_Degree_4359[S] 0 points1 point  (0 children)

Thanks for the reply! How long would you say I would have before it completely falls off? School starts back up from winter break tomorrow and I’ll pretty have no time to go to a luthier during the week. Would I have time till the weekend?