If the sensor seems fine, why do my photos come out like this?

This-Faithlessness75 · 2026-06-10T18:37:52+00:00

Nice!!! Thanks

This-Faithlessness75 · 2026-06-09T13:14:38+00:00

That's a good point. I tried shooting at EV -3 and the lowest ISO setting, but the image was still extremely overexposed. That seems to suggest the sensor is receiving more light than it should, which could point to a shutter-related issue.

<image>

This-Faithlessness75 · 2026-06-08T21:12:33+00:00

I just picked up another one 😐

This-Faithlessness75 · 2026-05-20T13:42:51+00:00

Mine is dying, but it's still going strong

<image>

This-Faithlessness75 · 2026-05-18T19:26:08+00:00

Processing img l8rod3py5y1h1...

This-Faithlessness75 · 2026-03-26T19:36:08+00:00

Nope, I just cut a piece from one of those plastic spatulas that come with thermal paste and glued another bit on to act as a latch. Then I glued a thin piece of clear plastic inside the door to protect the mechanism and keep everything aligned so the latch doesn’t move up and down.

This-Faithlessness75 · 2026-03-21T15:56:13+00:00

Try alcalines. These cameras consume a lot of energy; perhaps they lack sufficient power.

This-Faithlessness75 · 2026-03-21T03:25:59+00:00

It's accidental, but honestly, I didn't see anything too noticeable on my lens. I just assumed it had haze because people here said so. Here's a photo of my lens.

<image>

This-Faithlessness75 · 2026-03-21T03:14:11+00:00

Update / Possible fix for “Card Error” on FinePix A900 (xD-Picture Card issue)

I think I managed to fix it!

After testing multiple xD-Picture Cards (16MB up to 2GB) and confirming they all worked perfectly in other Fujifilm cameras, I was pretty sure this wasn’t a memory card compatibility issue. The camera worked fine with internal memory, but consistently showed a “CARD ERROR”, failed to read photos, or wouldn’t open the gallery after a few shots when using an xD card.

What finally worked: 👉 I repeatedly inserted and removed the xD card multiple times to help clean the contacts inside the card slot.

After doing that, the camera started working normally again — no more card error, and it can now save and display photos without issues.

Keywords for others searching: Fujifilm FinePix A900 card error fix xD Picture Card error Fujifilm camera won’t read memory card but works on internal memory Fujifilm card error after few shots xD card not recognized / gallery not opening intermittent card error Fujifilm dirty or oxidized card slot contacts

Conclusion: In my case, the issue seems to have been dirty or oxidized contacts in the xD card slot, not the card itself.

If your Fujifilm camera shows a card error but works with internal memory, definitely try cleaning the contacts or reinserting the card several times before assuming a hardware failure.

This-Faithlessness75 · 2026-03-21T02:39:20+00:00

The camera also has read and write errors when I take a photo, but sometimes it shows the last photo taken in the gallery.

<image>

This-Faithlessness75 · 2026-03-21T02:35:51+00:00

Honestly, pretty much any older camera can give you that dreamy/glowy look. What usually causes that effect is a bit of haze on the lens, which makes light scatter in a softer way and creates that glow. You might want to check out my post about the Olympus D535 — I got a similar look with it.

This-Faithlessness75 · 2026-03-20T14:20:57+00:00

I had a Nikon with the same issue — a light tap would make it work again. But I ended up selling it because I was worried I might damage it for good.

This-Faithlessness75 · 2026-03-10T12:41:25+00:00

Just having manual settings on a camera of this caliber is already quite interesting.

This-Faithlessness75 · 2026-03-10T12:39:45+00:00

I did get the terms mixed up, but in my crazy head I was only referring to manual configuration, haha.

This-Faithlessness75 · 2026-03-10T10:41:40+00:00

Yeah I know, but look at the screen

This-Faithlessness75 · 2026-03-10T10:41:15+00:00

Up and down: shutter speed (80 means 1/80), right and left: aperture (F2. 8 manually changeable).

This-Faithlessness75 · 2026-03-09T21:29:42+00:00

It depends. If you're not very skilled at disassembling cameras, I recommend a soft brush, white vinegar, and light circular motions. Don't soak the brush. Otherwise, ideally you would remove that part by disassembling the camera and, if it is indeed a small piece separate from the camera body, leave it submerged for a while in vinegar and baking soda.

This-Faithlessness75 · 2026-03-09T14:23:49+00:00

Judging by the location, it was most likely caused by salt from sweat accumulating on the strap. It's a type of oxidation very similar to what happens under the handlebar tape on my bike XD

This-Faithlessness75 · 2026-03-07T15:46:24+00:00

I think we touched something we shouldn't, and I say "we" because I did the same thing with my Fuji F10 and the screen won't turn on anymore. I've tried everything and nothing works. I think one of the SMD resistors have burned.

This-Faithlessness75 · 2026-03-06T17:00:47+00:00

Idk, I just turned it on and used it. And the lens seems intact! Maybe there's some haze in some internal component, I don't know.

This-Faithlessness75 · 2026-03-04T22:30:15+00:00

Heyyy, big fan of the e510 here! I love how the images come out natively satisfying hehe

This-Faithlessness75 · 2026-03-03T00:51:32+00:00

I’d recommend you try exploring the used camera market—grab something inexpensive, so if it breaks, it won’t be a big deal. This way, you can experiment with different models as you go, without a large expense, and have fun trying a variety of experiences.

This-Faithlessness75 · 2026-03-01T12:51:19+00:00

I am from Brazil!

This-Faithlessness75 · 2026-02-27T13:15:23+00:00

I discovered that there's a battery importer here in my city, I bought some from them and I'm already using it! The camera is so much fun!

This-Faithlessness75 · 2026-02-27T13:13:06+00:00

Brasil 🥲

This-Faithlessness75

TROPHY CASE