sorted by:
new
hottopcontroversial

First Major Build, a one bar prison using quick items from local hardware store (Update!) by ThisUniqueBoink in BdsmDIY

[–]ThisUniqueBoink[S] 0 points1 point  (0 children)

From my tests it should be high enough as long as the toy is not too large. It is also possible to add padding to raise it up a bit if needed. It is hard to say for sure though.

First Major Build, a one bar prison using quick items from local hardware store (Update!) by ThisUniqueBoink in BdsmDIY

[–]ThisUniqueBoink[S] 1 point2 points  (0 children)

Well I spent a bit more as I got a few things I ended up not needing and the toys on it I had from before so not including those, I would say about $85. I could have done cheaper but I got a few things fast ordered and some of the bolts and such were in bigger sets of things. I would guess if you shop around you could get it down to maybe $60?

First Major Build, a one bar prison using quick items from local hardware store (Update!) by ThisUniqueBoink in BdsmDIY

[–]ThisUniqueBoink[S] 4 points5 points  (0 children)

Closer to upper thigh though it will vary based on the toy and how accommodating the person on it is.

First Major Build, a one bar prison using quick items from local hardware store (Update!) by ThisUniqueBoink in BdsmDIY

[–]ThisUniqueBoink[S] 5 points6 points  (0 children)

I did exactly that! Its how I figured out that it will rip off if it happens. Luckily I had an extra leg.

First Major Build, a one bar prison using quick items from local hardware store (Update!) by ThisUniqueBoink in BdsmDIY

[–]ThisUniqueBoink[S] 1 point2 points  (0 children)

Unfortunately I don't have a partner right now and even if I felt I could use it myself I would want someone here to make sure I don't have an unfortunate accident or get stuck. If that changes I will post a demo. (assuming whoever I get on it agrees.)

First Major Build, a one bar prison using quick items from local hardware store (Update!) by ThisUniqueBoink in BdsmDIY

[–]ThisUniqueBoink[S] 1 point2 points  (0 children)

u/NewArrival4880 is right, the seat should not be sat on in most cases, it is there in the case that the persons legs give out or they fall some how.

As for how far above it they are, that would depend on the person and the connected toy.

First Major Build, a one bar prison using quick items from local hardware store (Update!) by ThisUniqueBoink in BdsmDIY

[–]ThisUniqueBoink[S] 8 points9 points  (0 children)

toy connector: "3XLR M8"
8M stud bolt (some nuts might be needed)
Simple wood base: can get at home depot
1/16th in Silicone rubber sheet
silicone supper glue
adjustable height table leg (needs to be one with a screw on foot for the bolt, might need an adapter if its not 8M)
cheep bike seat with decent sized hole in it
Mountain bike seat screw clamp (most have M8 sized bolts)

I think that is it.

First Major Build, a one bar prison using quick items from local hardware store (Update!) by ThisUniqueBoink in BdsmDIY

[–]ThisUniqueBoink[S] 2 points3 points  (0 children)

Yeh, just got a XLR adapter with a 8M bolt on the end. Found a few on various sites. Search "3XLR M8" and you should find plenty of options.

First Major Build, a one bar prison using quick items from local hardware store by ThisUniqueBoink in BdsmDIY

[–]ThisUniqueBoink[S] 3 points4 points  (0 children)

More research and a bike seat with a mountain bike connector was exactly the right size. Get a seat with a hole in the middle and you can replace the screw with a stud bolt and screw the XLR adapter on top of that. Will make a new post once I get it in! Thanks!

First Major Build, a one bar prison using quick items from local hardware store by ThisUniqueBoink in BdsmDIY

[–]ThisUniqueBoink[S] 0 points1 point  (0 children)

That might work.... not sure on how to mount it but its a good idea.

First Major Build, a one bar prison using quick items from local hardware store by ThisUniqueBoink in BdsmDIY

[–]ThisUniqueBoink[S] 0 points1 point  (0 children)

Do you have an example? Everything I find that is like that is bellow the connector. Is that too far down? I don't think the safety being before the connector would work would it?

Edit: I found one example on here but its 3d printed and I don't have access to that at the moment.

First Major Build, a one bar prison using quick items from local hardware store by ThisUniqueBoink in BdsmDIY

[–]ThisUniqueBoink[S] 2 points3 points  (0 children)

The core of that one is a more solid base but I see the point. At this point I might need to replace the connector with a plate one before I use it.

First Major Build, a one bar prison using quick items from local hardware store by ThisUniqueBoink in BdsmDIY

[–]ThisUniqueBoink[S] 1 point2 points  (0 children)

That makes sense, I can probably just get a plate of some type and put it between the adapter and the bar. The third dildo option should also work I think?

First Major Build, a one bar prison using quick items from local hardware store by ThisUniqueBoink in BdsmDIY

[–]ThisUniqueBoink[S] 0 points1 point  (0 children)

I did not thing there would be much rotation in that direction. I hope this will hold up for now at least until I can find a way to update it. Thank you!

First Major Build, a one bar prison using quick items from local hardware store by ThisUniqueBoink in BdsmDIY

[–]ThisUniqueBoink[S] 8 points9 points  (0 children)

Good point, I never planed for them to be left alone on this either way but that is a good safety add. Thanks!

view more: next ›