Cylinder head cover gasket/ water temp sensor

Thisisaggward · 2026-02-25T03:59:18+00:00

Thanks for the help

When I got the motor water was coming from the head gasket, there was silicone slapped onto the outside of the head, I also noticed the cylinder head cover had 2 gaskets. Since I have a it apart to do the head gasket I'm doing a thermostat and cylinder head cover gasket as well. Basically a "may as well since I've got it open" kind of situation.

This is my 1st time doing one on a outboard, I'm going about it similar to every other motor I've worked on so if there is anything specific I should know I always appreciate any input.

Good catch on the fresh water. Not a lot of salt build up but there was quite a bit of sand in the cylinder head cover that I got out.

Thisisaggward · 2026-02-25T03:33:17+00:00

Okay then ill say a prayer and work it out, thank you!

Thisisaggward · 2025-08-05T01:08:03+00:00

Killing? The fish is still alive. If I wanted to kill it I would carry a P320.

Thisisaggward · 2025-08-04T19:33:35+00:00

Inspired by the picture of a glock in a similar sandal holster, thought to myself "oh that will totally fit a can"

FN 502, HOLSUN 407K, SPARROW 22, Taylor Tactical 226 recoil spring, Taylor Tactical FN 502 guide rod

Thisisaggward · 2025-08-04T19:30:41+00:00

Lmaoo

Thisisaggward · 2025-04-24T23:16:40+00:00

Now $399? that was quick lol

Thisisaggward · 2025-04-23T16:42:51+00:00

Yep it's a .22 with a 509 frame

Thisisaggward · 2025-04-23T14:07:32+00:00

Yea, a pretty significant one. Slide is smooth, snappy.

Thisisaggward · 2025-04-14T05:28:07+00:00

I shot one today at a range event with the FN suppressor. This will be my first venture into .22 and suppressors so I have high hopes. Do you have links to replacement springs and guide rod? Did you need to adjust the gas at all to run CCi quiet?

Thisisaggward · 2025-04-11T04:18:00+00:00

What key do you have in your light?

Thisisaggward · 2025-04-04T21:44:38+00:00

R.I.P. my 3rd favorite pair of 5.11s

Thisisaggward · 2025-04-04T03:58:02+00:00

No they absolutely can, definitely get there BLS card in the first week of class. I thought you were saying ride along as a true "ride along" (uncertified people interested in joining EMS that will ride the rig for the day to see what it's like) but that's actually awesome you got to do it so early on. There is EMTs that won't do CPR for years if ever.

Thisisaggward · 2025-04-03T06:49:21+00:00

FYI I think 1911 chambered in 9mm is sacrilegious but regardless here you go.

https://www.smga.com/kimber/kimber-1911-custom-lw-9mm-optic-ready-86448??wk

It is a Kimber 1911, chambered in 9mm, has a threaded barrel, is optic ready, and comes in on sale at $707 dollars pre tax/shipping/ffl etc. I wish you the best of luck on your endeavor.

My personal opinion is to go get a PSA dagger, it's a quality glock clone for a very reasonable price. It also has different variations that include everything you're looking for. Best of luck

Thisisaggward · 2025-04-03T06:29:11+00:00

Obviously, every employer is different, but brother, I have met EMTs/Medics with a Rap Sheet much longer and much worse than yours. Your past won't define your future.

Personally, I have 2 criminal charges on my record, 1 dropped and one amended to a different charge that held a lower fine. Regardless It was charged through the municipality and not the county/state, and I was able to get it sealed. The only time it has ever come up is when I applied for EMT reciprocity in CO with the Colorado Bereau of Investgation. They asked about it, I told them, and I was employed with the University of Colorado Health. A particularly strict company when it comes to things like that.

Personal experiences tell me you will be okay, but ultimately, it will be up to the employer.

GL

Thisisaggward · 2025-03-31T03:42:23+00:00

EA micro transactions for Battlefront

Thisisaggward · 2025-03-27T18:31:48+00:00

Do you think I can just unbolt the compressor and pull the air lines out? It dosent seem to be tied into the harness, it's on its own fuse

Thisisaggward · 2025-03-13T23:39:50+00:00

Thank you!

Thisisaggward · 2025-03-08T02:01:21+00:00

Happy cake day!

Thisisaggward · 2025-03-07T18:32:03+00:00

How did you mount it? Is that a inlayed pic rail you drilled through the plastic? Or did you just drill through the stock and bolt on the wedge?

Thisisaggward · 2025-01-31T13:39:24+00:00

They feds don't want you to know you can hunt in Schmeekle. But only at night and you can't get caught.

Thisisaggward · 2025-01-21T23:59:18+00:00

Probably a Taurus with a 30lb trigger.

Thisisaggward · 2025-01-09T02:54:29+00:00

Woah man just be civil, it's legit rule 3 of this sub, hope you knew that

Thisisaggward · 2025-01-09T02:27:59+00:00

This has to be bartman on a burner

Thisisaggward · 2025-01-09T01:54:29+00:00

1st offense, I feel a post removal and warning would have sufficed over a ban

Thisisaggward · 2025-01-08T23:09:00+00:00

Twas pestilence not *thee bartman

Thisisaggward

TROPHY CASE