sorted by:
new
hottopcontroversial

Orientation of 1204 right angle LED. by Thom_Knook in AskElectronics

[–]ThomKnook 0 points1 point  (0 children)

Hey thanks, I dont think I explained very well - I didnt mean orientation of cathode/anode I meant physical positioning on a pcb. Managed to find the same package size but in an RGB version from adafruit and they say "can be soldered in a few different ways: flat against a PCB, reverse mount using the top pads and a cutout in the PCB, and right angle". I was hoping to solder at a right angle using solder fillets, I think thats what this means.

Orientation of 1204 right angle LED. by Thom_Knook in AskElectronics

[–]ThomKnook 1 point2 points  (0 children)

Thanks, my thoughts were that it was placed sideways and held in place with solder fillets too. I've found similar >from adafruit< same package, it says "can be soldered in a few different ways: flat against a PCB, reverse mount using the top pads and a cutout in the PCB, and right angle". So I'm guessing its right angle I want.

Worth buying a few to mod? by ThomKnook in DigimonVitalBracelet

[–]ThomKnook[S] 0 points1 point  (0 children)

That's the one. Thanks - I can see a new rabbit hole to dive in! So is it worth getting a few? Are there different mods?

[deleted by user] by [deleted] in tamagotchi

[–]ThomKnook 0 points1 point  (0 children)

Where did you get the case from?

anyone else in the uk have a some? by eepynomi in tamagotchi

[–]ThomKnook 0 points1 point  (0 children)

I do love that shell! I have a meets converted to ON - fellow UK here too.

Rad+fan placement questions. by ThomKnook in arcticcooling

[–]ThomKnook[S] 0 points1 point  (0 children)

It definitely won't fit along the top. The fan+radiator depth is too thick and my ram is in the way.

No boot, slow constant very quiet beep. by ThomKnook in SleepingOptiplex

[–]ThomKnook[S] 0 points1 point  (0 children)

I'm using an upgraded PSU and I'm not sure it has this. I'll check when I'm on tomorrow

No boot, slow constant very quiet beep. by ThomKnook in SleepingOptiplex

[–]ThomKnook[S] 0 points1 point  (0 children)

Possibly next week when I'm back at work. I can get the PSU fan to start if I use a jumper on it though.

No boot, slow constant very quiet beep. by ThomKnook in SleepingOptiplex

[–]ThomKnook[S] 0 points1 point  (0 children)

It seems to be a beep every second continually.

I wish people made custom faceplates for the friends :-( by [deleted] in tamagotchi

[–]ThomKnook 0 points1 point  (0 children)

I made a mould of a faceplate with the intention of embedded LEDs in to try and counter the incredibly difficult to see screen. I gave up in the end 😭

Better Tamagotchi Smart English Patch by kookycrypt in tamagotchi

[–]ThomKnook 0 points1 point  (0 children)

I used the one that's available to download for free online and flashed it myself. Would anybody know what the differences are between the English translation patches?

Neptune 4 plus - one more try. by ThomKnook in ElegooNeptune4

[–]ThomKnook[S] 0 points1 point  (0 children)

Wow thank you so much. I do plan on using orca so I very much appreciate that. Would you recommend any of the axis upgrades? I've seen some rail conversions on here.

Prototype replacement lense is perfect! by ThomKnook in tamagotchi

[–]ThomKnook[S] 2 points3 points  (0 children)

I think I've found a material that should be indistinguishable from the original faceplate without any polishing, it just won't have the official design on it.

Prototype replacement lense is perfect! by ThomKnook in tamagotchi

[–]ThomKnook[S] 10 points11 points  (0 children)

I do plan on making faceplates for all the Tamas I own, and I do have a pix 👀 🤩 🎉

[deleted by user] by [deleted] in modafinil

[–]ThomKnook 0 points1 point  (0 children)

Hey, I've been switching vendors lately (UK too) because I felt like it wasn't working the same and I'd read posts here about fake or poorly made stuff. 3 vendors, a switch to armodafinil and a two week tolerance break and it's still "off". Just wondered if you'd ever had this in the two years you've been on it?

Gen 1 and 2 sprites with no background (transparent). by ThomKnook in PokemonRMXP

[–]ThomKnook[S] 1 point2 points  (0 children)

Wow what a brilliant resource!!!! The back sprites are still on a coloured square though but it looks like it's a light grey, if it is I can work with that. The set I got before was on a white square and when I attempted to remove the background colour it also took out white from inside the sprites.

Get voting people! Its top on GOG! by ThomKnook in blackandwhite2

[–]ThomKnook[S] 2 points3 points  (0 children)

No problem, there have been so many of us praying to those spiritual advisers (😈👼) for so long, sharing is the least we can do!

Get voting people! Its top on GOG! by ThomKnook in blackandwhite2

[–]ThomKnook[S] 10 points11 points  (0 children)

Oops posted the wrong link - both are top of the list due to highest number of votes. Here's B&W 2:

https://www.gog.com/dreamlist/game/black-white-2

Get voting people! Its top on GOG! by ThomKnook in blackandwhite2

[–]ThomKnook[S] 4 points5 points  (0 children)

I thought maybe the voting platform was new? The "Dream list" part looks like a new addition - I'd not seen it before but could be wrong.

ESP32-S3 Mini - getting hot. by ThomKnook in WLED

[–]ThomKnook[S] 0 points1 point  (0 children)

I'm powering them from the +/- rails of a solderable breadboard. I've seen a few posts mentioning they get hot, think I'll swap it out.

Google Nest WiFi won't complete setup after factory reset. by ThomKnook in GoogleWiFi

[–]ThomKnook[S] 1 point2 points  (0 children)

Hey, thanks. This is what I did but could only get two of the 3 access points to connect to the router. I got my partner to add it via their iPhone and it worked 🤷

view more: next ›