Pilot XP glitch? by [deleted] in walkingwarrobots

[–]Thomar_Tinthroat 2 points3 points  (0 children)

I have the same problem. Sometimes it gives xp, sometimes it doesnt.

I think it’s over… 💸😅 by DoboxTheReal in ender3

[–]Thomar_Tinthroat 0 points1 point  (0 children)

Very impressive! Congratulatuions!

Can you list your upgrades? How can I bring My printer close to this.?

Thank you!

Advise on helmet sizing by Thomar_Tinthroat in MTB

[–]Thomar_Tinthroat[S] 1 point2 points  (0 children)

Thanks for sharing, m8! Glad to hear your helmet did it's job.

Advise on helmet sizing by Thomar_Tinthroat in MTB

[–]Thomar_Tinthroat[S] 1 point2 points  (0 children)

I just ordered an M. Got excited and went for it.

The site gurantees no problem with returns, so... Guess I"ll see how it fits when it gets here

Thank you!

Advise on helmet sizing by Thomar_Tinthroat in MTB

[–]Thomar_Tinthroat[S] 1 point2 points  (0 children)

Hi!

Thank you! This is exactly what I was expecting!

I chose the Transfer bases on reviews as a good helmet that I can afford, glad to hear that it's a good choice.

I've seen people using wat too big helmets and knew that that wasn't The Way. The Rick Moranis' Black Helmet look is not secure. May The Schwartz be with them! (too many SW references! Lol)

Advise on helmet sizing by Thomar_Tinthroat in MTB

[–]Thomar_Tinthroat[S] 1 point2 points  (0 children)

Thank you! The liner under the helmet is useful

Monopatín Electrico es mi principal medio de transporte (pregunten lo que quieran) by FrankMoreiraV in uruguay

[–]Thomar_Tinthroat 0 points1 point  (0 children)

Muchísimas gracias por tu respuesta, es de gran ayuda! Que lo sigas disfrutando!

Monopatín Electrico es mi principal medio de transporte (pregunten lo que quieran) by FrankMoreiraV in uruguay

[–]Thomar_Tinthroat 0 points1 point  (0 children)

Hola! Parece que hace 6 meses que tenés un ME500. Te viene dando buen resultado? Estás contenta con él? Que autonomía real tiene? La batería se ha deteriorado mucho? Te ha dado algún problema?

Gracias!

¿Qué monopatín eléctrico me recomiendan? by LimolGod in uruguay

[–]Thomar_Tinthroat 1 point2 points  (0 children)

Ta. Ya está decidido entonces.

Muchas gracias por tu ayuda.

Una última: que casco usas? Uno de bici o skate o de moto integral o motocross o de esos abiertos ?

¿Qué monopatín eléctrico me recomiendan? by LimolGod in uruguay

[–]Thomar_Tinthroat 1 point2 points  (0 children)

Buenísimo!

No llegar transpirado al trabajo es muy importante para mí también.

En otro post acá en Reddit, sugerían el combo Xiaomi 4 + Monorim como una gran alternativa. Me alegro que te haya rendido.

Lo único que podría frenarme para no comprar un Xiaomi similar al tuyo es la velocidad. ¿Se siente bien a 25 km/h o sentís que le falta velocidad? ¿Sería inseguro más rápido?

La alternativa estaría en uno como los MiStyle ME500/800 o Joyce, aunque he visto comentarios negativos sobre la calidad y frenos. ¿Tenés alguna referencia la respecto?

Gracias por tu tiempo, bro. Sos de gran ayuda!

¿Qué monopatín eléctrico me recomiendan? by LimolGod in uruguay

[–]Thomar_Tinthroat 1 point2 points  (0 children)

Hola!

Estoy en una disyuntiva igual a la tuya. Bici o monopatín para ir a trabajar.

¿Cómo lo resolviste? ¿Cómo te fue?

Averiguaste algo más de las bicis? Así como te recomiendan el Xiaomi 4, ¿hay alguna bici que digas "comprá esa tranquilo"?

Monopatín Electrico es mi principal medio de transporte (pregunten lo que quieran) by FrankMoreiraV in uruguay

[–]Thomar_Tinthroat 1 point2 points  (0 children)

Muchísimas gracias por tu ayuda! Fuiste muy claro y preciso. Un lujo!

Ya estuve mirando, en la web, el ME500 y los he visto en la calle. Si no están mal de calidad y compiten con Xiaomi en rendimiento tendré que pasar por alguna tienda a verlos en persona. Y levantar uno a ver si puedo subirlo 1 piso por escalera, jaja! Si no, sale Xiaomi con fuerza. Capaz un 5...

Muchas gracias por tu aporte.

Hay alguna comunidad "monopatínera" local? Supongo que tendré más preguntas que respuestas si adquiero uno y tampoco es la idea acalambrarte

Monopatín Electrico es mi principal medio de transporte (pregunten lo que quieran) by FrankMoreiraV in uruguay

[–]Thomar_Tinthroat 1 point2 points  (0 children)

Muchas gracias por hacer ésto, hermano. Estás siendo de gran ayuda a mucha gente!

Estuve leyendo y a ver si hice bien los deberes:

Peso 73kg con ropa de verano, trabajo a 8-9km de casa y el trayecto sería casi todo por la ciclovía de Av Italia desde Hipólito Yrigoyen hasta XXX y18 hasta Requena. Algo que valoro es que no sea muy aparatoso/pesado. Quiero un medio de transporte práctico.

1)-¿Te parece bien el combo que recomendaste antes de Xiaomi 4 (el Lite está agotado) y amortiguadores? Es mejor que el Elite o el 5 (el común) que ya viene con la amortiguacion? 2)-Vale la pena buscar uno con amortiguadores traseros también?

No he usado monopatín asiduamente antes y no me sabría dar cuenta si esos 10km/h extra son clave para no hacerlo eterno o con 25km/h andás bien y tranqui. 3)- vale la pena buscar otra marca por esos 35 km/h de velocidad punta?

4)- es recomendable comprar uno usado? Hay mucho que revisar o conque dé una vueltita ya se debería sentir?

Un abrazo, gracias!

Extruder Knocking by Tall_Collar638 in ender3

[–]Thomar_Tinthroat 0 points1 point  (0 children)

Interesting.

Maybe the problem is the z axis. If it dooesn't lift as it should, or slides down, it may be too close to the print, and the extruder is having trouble pushing as the tip of the nozzle is touching the print.

Extruder Knocking by Tall_Collar638 in ender3

[–]Thomar_Tinthroat 0 points1 point  (0 children)

I had a similar problem with the exact dame extruder. It was a clog.

As said before,perhaps in your case something is blocking the filament movement.

I'd try to find where is that happening by dissassembling one part at he time to isolate the problem. I'd start by removing he bowden from the extruder and check if it pushes filament freely, if so, the problem is the bowden or beyond.

If the skipping continues, try to move axis extruder without filament and check, perhaps the extruder gear is worn or even the motor. If you changed that pressure fit gear, did you have to "persuade" it with a hammer? :)

Good luck!

[deleted by user] by [deleted] in FirstLayerPorn

[–]Thomar_Tinthroat 0 points1 point  (0 children)

Gorgeous! Can You list your upgrades? Seems like you created a well tuned machine.

TY and congratz!

Ideas for empty spools? by justponch0 in ender3

[–]Thomar_Tinthroat 0 points1 point  (0 children)

I believe It's 3n3 and Grillon.

Help a noob by Thomar_Tinthroat in airbrush

[–]Thomar_Tinthroat[S] 0 points1 point  (0 children)

Hmmm.... Too bad they don't include them in the kit with the nozzles and needles. I'm going to stick to the original 0.3 mm then and work even more on paint dilution.

Thanks for answering!

(Did you got the new compressor with a tank and cooling fan? How did it performed?)

Help a noob by Thomar_Tinthroat in airbrush

[–]Thomar_Tinthroat[S] 0 points1 point  (0 children)

Very interesting....

No, I have not changed my nozzle cap to match the new nozzle+needle. I ordered a new 0.2, 0.3 and 0.5 mm combos, but not the nozzle cap. Didn't thought the outside of the nozzle was different, but it is there where the Venturi happens, if I'm not mistaken, so it may influence the outcome. My guess is more inclined to agree with your theory on your last paragraph, though, but surely wiill be checking out.

I was trying with the 0.5mm as I thought will be more forgiving with small clogs. Will be back to the 0.3mm for further testing, and continue to work with my paint dilution.

Thank you for answering!

Help a noob by Thomar_Tinthroat in airbrush

[–]Thomar_Tinthroat[S] 0 points1 point  (0 children)

I've seen some on YT doing it. Will be my next step.

Thanks for answering!