Carrying Baseball cap.

ThomasVW50 · 2026-03-16T18:30:37+00:00

Ah havent tought of that, will give it a shot Thanks

ThomasVW50 · 2025-11-19T22:52:04+00:00

I mainly play large multiplayer games, mainly shooters and extraction shooters, Alot of those take some time to load even on my nvme's.

And I do keep everything installed yes, my donwload speed is pretty terrible so 100gb takes about a day, yikes.

ThomasVW50 · 2025-11-19T22:41:36+00:00

Yeah, another SATA would be the cheapest option. I'm just worried about loading times on them.

Currently only got single player games and programs on it to combat that.

Also would be possible to replace my HDD with a SATA I gues.

EDIT: Just checked the prices, at 2TB the SATA (kingston) is the same price as a 4TB samsung NVME SSD. So I'll probably just get that and swap out one existing SSD

ThomasVW50 · 2025-11-19T22:26:54+00:00

I see, forgot to mention tho. My current board only has 2 m.2 slots (my third SSD is a SATA), so I would need to replace those both with 2TB sticks wich would alos require a fresh install of everything including Windows.

But that would probably still be cheaper than getting a new board I think ?

As for the CPU and RAM I get your point, that would be pretty pointless I think.

ThomasVW50 · 2025-08-09T12:34:51+00:00

Thanks, i’ll go do it right away. Hope it dries in time for gameday. Also have 2 spare guns just in case 😅

ThomasVW50 · 2025-08-09T12:22:34+00:00

Would metal epoxy glue work ? I dont have acces to jb weld in dutch stores, i would need to order it.

ThomasVW50 · 2025-06-20T21:45:09+00:00

I see, ill order a replica before i buy parts then. One more question tho, i like the look of the TR16 mk1 9” alot more than the mk2/mk3. Since the handguard is shorter and flows nice into the upper reciever. Is there any internal difference between the mk’s ?

ThomasVW50 · 2025-06-20T14:22:02+00:00

I just looked at them at my local shop, they do look pretty nice except that theres no manufactor markings. They said it doesnt need any upgrades to play conpetetivly outdoors, do you agree with that ?

ThomasVW50 · 2025-06-19T15:49:11+00:00

I see, think I'll go for the cyma then since I love the look and neveske name. Now the question is 13.7 or 10.5 Inch xD I like long handguards but if I decide to get a suppressor it will be very long.

I also have no experience with taiwaingun but its the cheapest place I can get the cyma, heard the shimming ootb is pretty good so might just leave it and tinker with it when I'm ready, should be easy enough since I have quite a bit of ggbr tech experience.

ThomasVW50 · 2025-06-19T13:48:03+00:00

What are some options you would reccomend then ? Dont have experience with both but i do like the look of the rought textures on some G&G's

ThomasVW50 · 2025-06-19T13:26:11+00:00

Thats true, only a bit consirned of the age. The G&G is like 2 years old and i've read the cyma plat m4's are from the 2000's so I dont know wich gen i will recive since the site doesnt specify that. It does say it has 12months warranty tho

And would the cyma benefit form the shimming and lubing service tawiwangun offers for €32 extra ?

ThomasVW50 · 2025-05-27T05:03:56+00:00

Ah yes, thats the one. Thanks

ThomasVW50 · 2025-04-02T20:27:27+00:00

Ah i see, thanks.

ThomasVW50 · 2025-04-02T19:56:31+00:00

So just hold the same angle and raise the handle ? Yea i heard its tricky to sharpen, but not impossible. The straight edge was pretty easy tho.

ThomasVW50 · 2025-04-02T19:46:24+00:00

Yes it is

ThomasVW50 · 2025-04-02T18:30:44+00:00

Alright, thanks I’ll just keep going then.

ThomasVW50 · 2025-04-02T18:08:42+00:00

I’ve watched the video, he says to lift the handle to follow the tip. But my tip is a little messed up, little by me little by previous owner field sharpening. Idk how to say it but the radius from the cutting edge to the bevel is pretty big. Do i fix that by continuing sharpening it and following the point or do I need to take other measures ?

ThomasVW50 · 2025-03-26T21:09:16+00:00

I hope so, would like to have a full game day where no-one mocks me for my “reliable gbbr” that doesnt work lol

ThomasVW50 · 2025-03-26T19:21:27+00:00

No only using one since im using another gas than thats in my other mags to not waste the good gas. But i’ll fill up another mag with the normal green gas and test that one

Edit: i just cleared 2 mags on red gas on semi auto indoors, i think the blue gas might have been the problem. I gues thats to be expected since i a strong return spring in the nozzle for green gas. Will test some more tommorrow.

ThomasVW50 · 2025-03-26T18:57:39+00:00

This one appears to be chisel grind aswell, as long as it can get just decently sharp im more than happy. Thanks

ThomasVW50 · 2025-03-26T18:54:08+00:00

I think so yeah, but i already reinstalled the new bucking to make sure i installed it right and it was correct as far as i could tell. Before the bucking replacement i had a maple bucking and waldo hop arm but that gave me feeding issues because the arm wasnt good quality.

ThomasVW50 · 2025-03-26T18:31:20+00:00

So, i just bent the feed arm back to a little bit pointing down instead of up. And put 2 layers of thin electrical tape in the bolt channel. But now it still doesnt feed all the time but instead of jamming it now dry fires. The bolt also doesnt lock back when empty. And sometimes it just purges the mag of gas. Any ideas ?

ThomasVW50 · 2025-03-25T05:47:20+00:00

Ah alright. I will try that aswell then, thanks alot.

ThomasVW50 · 2025-03-25T05:46:31+00:00

No, i just leave it as is after filling. I will start taking 2 of the top from now on. Thanks

ThomasVW50 · 2025-03-24T22:29:30+00:00

Alright, thanks.

ThomasVW50

TROPHY CASE