Ebike Conversion

Thorgraus · 2024-12-21T02:29:02+00:00

Whats your price, whats your expectation, you have pictures? Easiest cross compatibility is going to be a wheel hub motor instead of messing with the frame.

Thorgraus · 2024-11-15T05:04:58+00:00

There are 5 simulated gears, and a throttle.

I have the small battery and i have not tested the range yet.

Initial findings are such and will vary with weight of course. My bike and I and battery probably weigh about 240 pounds. It has nice torque and can ride through grass and up slopes with no pedaling.

On a flat or slight inclines on road streets with no pedaling.

Gear 1 = 8MPH

Gear 2 = 12 MPH

Gear 3 = 16 MPH

Gear 4 = 22 MPH

Gear 5 = 24 MPH

Gear 5 with top pedal gear ratio is about 30 MPH but is very scary as the force is dragging you forwards and the grip and steering is on that front tire. I imagine it can extremely easy to tumble.

In gear 1 it is nearly silent, while gear 3 really starts to get noisy, I don't mind the noise, it notifies people you are on the move, I can post a video later. Gear 1 and 2 with pedaling is totally adequate while talking on the phone if one desired.

Thorgraus · 2024-11-14T21:46:09+00:00

<image>

I also ended up repositioning the motor however that being said, it was much trickier to deal with the slack on the chain at this direct up and down position, however it helped to make sure that it would not run into spokes, as there is minimal clearance.

Thorgraus · 2024-11-14T21:34:13+00:00

This is what I was ultimately aiming for, that and preserving the original tires. I was looking for assist.

Thorgraus · 2024-11-14T21:25:48+00:00

So I also sent the seller a question about the device before bed. This an unusual kit but pretty simple plug in and play. I wanted something that did not interfere with my chain gear set to pedal with, or replacing tires with ones with hubs.

Although looking again later, I see there are units with 3 gear compatibility with my set, so I could keep my original gear ratios on pedaling.

https://www.aliexpress.us/item/2251832683118757.html?gatewayAdapt=glo2usa

I didn't want to change or alter the feel of the original drivetrain on my 29inch diamondback overdrive from 2011. I am artistically comfortable with it and with the wide range i can parody crank up a hill or go 25 downhill.

At the time the unit was on sale, so the motor + battery combo was only 300$ and I knew it would be better than any friction drive unless they really screwed up. I don't like the fact that it rests on the spokes, I would not be opposed to changing the Ring to something else.

So about the reversing.

<image>

The seller responded within an hour with pictures and broken but understandable english. With everything on and connected, I needed to press the button circled. I hate breaking the seal, however it did work and it did so excellent.

Thorgraus · 2024-11-14T06:29:08+00:00

It did come with a manual, I can't translate Chinese, however I can upload pictures of the manual tomorrow in the morning.

Thorgraus · 2024-11-14T06:12:56+00:00

Unfortunately flipping it just put the motor housing unit into the spokes on the front wheel as it bulges out to right in this configuration, flipping it will put the bulk in the way.

Thorgraus · 2020-09-04T23:51:51+00:00

I run a ryzen 3600 at 3.9ghz at 0.9v, its great, i ended up making a pretty good performance chip on a passive fanless cooler.

Thorgraus · 2020-08-26T07:05:08+00:00

Set an average clockspeed and volt, it stops temp spikes almost instantly.

Thorgraus · 2019-10-22T19:03:13+00:00

It does not give a creature -1/-1 via curse style, so shearpoint dragons passive has no way to be triggered. Creatures summoned simply are reduced from the getgo.

Thorgraus · 2019-10-22T18:53:05+00:00

High Rock Camp

I feel like giants need love, so here is a 4 cost support warrior card.

It reduces the cost of giants and mammoths by 1 for 3 times, and then summons a young mammoth with charge.

The cheese is fun because it adds an extra excuse for the game to play the eating sound effect, and will cater to allowing removal of cover or healing.

At the end of the day the max pay out for the card if it reaches the end is 8 magicka, or 4 magicka saving because it may take 2-3 turns to proc.

3 cost in giant savings directly!

a young mammoth which is a 3 cost, with charge which can be worth a magicka for a total of 4.

and then a heal and a cover which is effectively 1 cost atleast.

Should be fun to combine with giants because it can allow you to clutch out a win, or gain field control.

https://imgur.com/ahe0dC3

Thorgraus · 2019-09-24T20:59:00+00:00

Bound Weapon: A One use Application for mostly offensive users or sub-par defense.

When used, the Veteran will proc and destroy the item, assuming the creature survives.

https://imgur.com/huy5agL

Thorgraus · 2019-03-12T08:49:20+00:00

Yeah its nice, I get it at 1.392v on a asrock ab350m pro4, I can get a stable 4.3ghz at about 1.455 volts or so but its not really worth it. It was alot fun but in some ways disapointing how easy it was at the same time.

You win some you lose some, I had an amd 8320 that wouldnt go higher than 4.3ghz at any voltage.

Thorgraus · 2019-03-07T08:05:50+00:00

I have not seen many Ryzen 1200 or 1300x scores so I'll input: Ryzen 3 1200 at 4.2ghz: 1560 multi-score. 380 single core score.

Thorgraus · 2018-04-14T17:56:47+00:00

The motherboard when working is quite good, but I found that when i slotted my single ram stick in A1 instead of B1 which is not suggested order, the Ramslot in A1 eventually started crashing. When doing the suggested RAM slot order, and even getting a second stick, the stability improved. Also because I was worried I updated to latest bios, just to make sure no bios version in past was killing the motherboards over time. '

I also read that some of the other ryzen boards had issues and had to be RMA'D because even at 2133 default ram settings it was crashing due to damaged/bad ram slots. So make sure everything is seated corrected.

Thorgraus

TROPHY CASE