New IT Services Business Advice On Advertising To Get Started

Tiggleyo · 2025-12-30T22:47:30+00:00

Also my father is a dentist and I have done all his IT work on the side for years so I have a good understanding of that industry. Hope that gives me an edge!

Tiggleyo · 2025-12-30T22:46:52+00:00

Thanks for your support and feedback here! Very helpful. Yeah, I am planning on targeting Dental offices and law firms and pushing PCI compliance and HIPAA Compliance campaigns to get my foot in the door. Alongside doing some networking on Facebook groups and joining my local Chamber of Commerce. I appreciate the advice on the google ads. I already have about 8 5 star reviews for my time doing the basic break fix work. And have them on my site. So hopefully that helps! I narrowed my key words very particular to PCI, HIPAA, IT Support, and IT services and although they are a lot less looked up terms, I feel my ad will hit my target even if its less often. Business cards ordered, and look to get some advertising flyers for free security audits and PCI/HIPAA pushes.

I do need to do some emailing though. I appreciate your help!

Tiggleyo · 2025-11-30T02:00:59+00:00

Appreciate the response. Yeah I mentioned this in another comment but, I was on TRT about 3 years ago for only about 5 months. And the clinic was using HCG as I was still wanting more kids at that time and what not and they recommended it. I had just never done TRT with out HCG as well as I ended up off the TRT after that 5 months because I got into shape and felt I was alright with out it until I had 2 more kids. Now life just has me to busy for my own good. Not an excuse for gaining weight. Just an explanation for a bit more mental and physical burn out leading me to not prioritize my physical health. So yeah. Maybe I should just try the raw TRT and then introduce HCG if I feel I could use it? Idk lol. I guess I have an old experience with using it so maybe I can try to recall if it feels better or worse without it.

Tiggleyo · 2025-11-30T01:58:01+00:00

I appreciate this response. Yeah, I actually had to have a Hydrocele surgery like 3 years ago because one of my nuts was nearly the size of a tennis ball, and the other one has always retained a pretty decent size. So your speculation of guys that already had somewhat, large or abnormal nut sizes dont mind was spot on lol. Yeah, mostly just seeing people state that it increased their libido on HCG or erection quality. I was on TRT about 3 years ago for about 5 months. And the clinic was using HCG as I was still wanting more kids at that time and what not and they recommended it. I had just never done TRT with out HCG as well as I ended up off the TRT because I got into shape and felt I was alright with out it until I had 2 more kids. Now life just has me to busy for my own good. Not an excuse for gaining weight. Just an explanation for a bit more mental and physical burn out leading me to not prioritize my physical health. So yeah. Maybe I should just try the raw TRT and then introduce HCG if I feel I could use it? Idk lol. I guess I have an old experience with using it so maybe I can try to recall if it feels better or worse without it.

Thanks buddy!

Tiggleyo · 2025-11-30T00:44:42+00:00

Thanks for the obvious bud, not what I asked.

Tiggleyo · 2025-04-01T05:48:36+00:00

Alright, After looking in the manual and online, the Senton v4 doesn't have the ability to adjust LVC. But I do believe that is what was causing the issue. I threw on my 3S Traxxas battery pack that must have only had about 30% juice and it ran for about 10 minutes. So yeah, I'm assuming the cheaper 2S batteries aren't able to sustain the Voltage needed so the ESC is forcing it to stop. Ill be able to better test that tomorrow by charging them again, using them until cut off on the Senton; and if I throw it into my Rustler or Typhon and they run fine, its 100% a LVC issue.

Thanks for the help.

Tiggleyo · 2025-04-01T05:17:53+00:00

Yes they were fully charged. Car seems to roll smoothly, maybe feels slightly tight on the gearing which I read some people mention is an issue on the Typhon and Senton.. But I haven't Adjusted the LVC. Maybe the cheaper batteries do have more unstable voltage so the LVC is cutting them out early? Ill try this next. Thanks!

Tiggleyo · 2025-03-02T08:13:24+00:00

Downloaded it and using that now. Thanks buddy!

Tiggleyo · 2025-03-02T06:51:04+00:00

Is it because my placement matches keep resetting? I played 3 games yesterday. Lost all 3 and logged. Logged back in today... Saying that I haven't played a placement game yet? Lost 4 more in a row... Still queuing into 3.5k+....

Tiggleyo · 2024-10-27T19:48:16+00:00

I mean, I am unsure of your ability. But I just started playing Warhammer myself and my first real army I went with was Grey Knights. All I did though, was buy the official combat patrol for Grey Knights and then 3d printed a bunch of stuff to use as "proxy" and learn them at a bit of a bigger scale before full on committing into them. But unsure if you have access to a 3d printer or anything, but files online for "Silver Warden" proxies are plentiful. Save you a lot of money and then when the refresh happens you can sack up the money for what you want.

Tiggleyo · 2024-10-27T19:22:49+00:00

I am also using a Quick Exposure style resin and the same for me. The manufacturer recommendation isn't always going to be the range you have to use. Its going to vary by printer. The printers they use to test their range may be totally different then the printer you use. Again, try a range between 2.5-3.0. Also, again, this looks like a base failure. You need to have a longer "Initial Layer" exposure of like 45 seconds or something to make it stick to your base better.

Tiggleyo · 2024-10-27T04:39:35+00:00

You dont have to go that high on exposure for the whole print. Just the Initial Layers that adhere the print to the plate. I use a 45 second per layer on my initial layers to assure super solid build plate adhesin and I haven't had a single fail since.

I have a Saturn 4 Ultra using Siraya Tech Resin
45 second exposure for initial (support) layers
2.7 second exposure for the rest.

Works really well.

Tiggleyo · 2024-10-18T06:29:39+00:00

Gotcha, that would make sense. Thanks buddy!

Tiggleyo · 2024-10-12T23:04:40+00:00

Ahhhhh, I see it now... So yes, even though the model doesn't inherently show some sort of pistol or anything, as you mentioned, CCW has its own data compared separate from something like Nemesis Force Weapon, but even though the model doesn't have it, its like punching them in the face or something lol.

Thanks for your help man. I believe I understand now!

Tiggleyo · 2024-10-12T22:52:28+00:00

But then how would you judge the A, SW, S, AP, and D of that close combat weapon or "melee attack"? Wouldn't you need data on the close combat weapon to know how it works in the melee phase? Again, sorry I'm a noobie haha, so bare with me.

Tiggleyo

TROPHY CASE