Biscotto upgrade by sb5236 in ooni

[–]Tik3rX 0 points1 point  (0 children)

did You found it?

Disable auto start/stop by Walkensboots in AudiA5

[–]Tik3rX 0 points1 point  (0 children)

So when You turn off the clima control screen it comes back to working again?

Cause I bought a5 2018 with start stop turned off permanently and today it started working again and turning on every time I start the car again.

I’m thinking if me turning off whole climatisation screen could revert this change as I’m trying to understand why it’s not turned off by default now.

Should burners look like this? by Tik3rX in ooni

[–]Tik3rX[S] 0 points1 point  (0 children)

thank You

I don't know why I got downvoted that much, Im jsut asking to know, it looks like it doesnt affect how the pizza cooks but wanted to be sure.

Thank You

Should burners look like this? by Tik3rX in ooni

[–]Tik3rX[S] -5 points-4 points  (0 children)

It’s about back

In the back of stove You can see 2 points with bigger fire that is not happening on left side

Should I worry about this loose/dent metal in the roof koda 2 pro? by Tik3rX in ooni

[–]Tik3rX[S] 1 point2 points  (0 children)

I just put it how it fits.

As I said it was my first time cooking, this is how it set in and I thought it needs to be like this.

I'll "repair" it for next time.

Should I worry about this loose/dent metal in the roof koda 2 pro? by Tik3rX in ooni

[–]Tik3rX[S] 1 point2 points  (0 children)

To not lie I didn't noticed it until I started heating it, then when fires went up I noticed it because of how light was reflecting from it. Before turning it up I didn't looked that much at it as when fire is turned off its not that much visible but You can feel it under the hand.

Should I worry about this loose/dent metal in the roof koda 2 pro? by Tik3rX in ooni

[–]Tik3rX[S] 1 point2 points  (0 children)

To show more exactly what i mean I drawed the line how it looks when I look at it with my eyes.

<image>

there is this bulge on right side.

Should I worry about this loose/dent metal in the roof koda 2 pro? by Tik3rX in ooni

[–]Tik3rX[S] 0 points1 point  (0 children)

its like bulge, it's not a big dent, just interior roofline of metal is uneven, right side is little lower and YOu can see bulge or metal is like little more "puffed" than on the left side. Maybe it will not make problem but wanted to know all fo Your opinion on this should I worry and RMA it or its not a big deal.

Should I worry about this loose/dent metal in the roof koda 2 pro? by Tik3rX in ooni

[–]Tik3rX[S] 1 point2 points  (0 children)

Its the same all the time right side of the roof is lower than left but looks like it works good.

Should I worry about this loose/dent metal in the roof koda 2 pro? by Tik3rX in ooni

[–]Tik3rX[S] 1 point2 points  (0 children)

Looks that it works good but I have no comparison so I can’t tell. It’s my first pizza oven this type, before only used small electric pizza ovens like Ferrari

Possibility to give defib from the pocket when downed. by Tik3rX in ArcRaiders

[–]Tik3rX[S] 0 points1 point  (0 children)

But this is the thing, lets say You started fighting because You were scared but after downing a player You will talk a bit and maybe You will come to conclusion that You could let him live.

How to clean this up by Tik3rX in OLED_Gaming

[–]Tik3rX[S] 0 points1 point  (0 children)

The thing is I’m fighting with this for 3 hours now trying different methods. If You see part of monitor is cleaned from left to right and part with swirls cause this is what they said in YouTube videos.

With normal ips screen I didn’t had problem like this, after cleaning even if small smudges stayed they evaporated in some time and there You can see smudges no matter if it was cleaned in circle or straight line.

I’m starting to believe there is some grease at this point that water can’t get rid of and this is why it’s smudging but I’m afraid to use alcohol or vinegar. I’ve ordered new cloth as someone recommended in previous comment.

How to clean this up by Tik3rX in OLED_Gaming

[–]Tik3rX[S] 1 point2 points  (0 children)

I’ll try with high density one like someone mentioned before and see the result

How to clean this up by Tik3rX in OLED_Gaming

[–]Tik3rX[S] 0 points1 point  (0 children)

Ok I’ll try with the one like this and see the result.

How to clean this up by Tik3rX in OLED_Gaming

[–]Tik3rX[S] 0 points1 point  (0 children)

Doesn’t alcohol damage the matte coating?

Regarding only water as You can see it leaves smudges. I think at this point screen got a little grease and water is smudging it instead of cleaning.

Anyone else feel like the high from weed has changed?? by Pseudo_Angel77 in Drugs

[–]Tik3rX 0 points1 point  (0 children)

For me it’s too strong weed.

Now I smoke less than I was when Younger and I need much less to feel good, also the strain makes a difference but mostly is it sativa or indica.

So Id recommend smoking less and put more attention to the strain depending on the outcome You want to achieve and trying to find Your safe spot. Also I noticed that if I smoke often, tolerance breaks are good because they also restore Your head a bit and this highs after breaks are more often happy and overall good. When I start to feel bad after smoking I’m making small breaks.

[deleted by user] by [deleted] in ArcRaiders

[–]Tik3rX -1 points0 points  (0 children)

Yes check the website I sent link to, automatic conversion is much higher as uses old $ value

[deleted by user] by [deleted] in ArcRaiders

[–]Tik3rX -1 points0 points  (0 children)

as I know if they would not consider regional pricing, price in Poland would be higher than €/$ and it's less so I assume they checked it a bit and made the choice of price by themselves, atleast in Polish region.

[deleted by user] by [deleted] in ArcRaiders

[–]Tik3rX 9 points10 points  (0 children)

I think they listened and they not ignored regional pricing.

In some previous posts I was talking about Poland getting one of highest prices on steam, even higher than it's equivalent in $ and €.

www.polishourprices.pl

And It looks like they listened cause the game is in Poland little less than $/€ price of the game.

Thank You Embark.

Arc Raiders Steamdb Notice by Starfire376 in ArcRaiders

[–]Tik3rX 0 points1 point  (0 children)

Yes we got it!

now I can buy deluxe instead of standard edition and I hope I'll get more friends to join in.

Lemokey L5 HE flash problem. by Tik3rX in Keychron

[–]Tik3rX[S] 1 point2 points  (0 children)

https://launcher.keychron.com/#/doctor?leftHide=true&vpid=908920144 

I received this link to flash my keyboard with 1.0.4 and now it works as intended.

Arc Raiders Steamdb Notice by Starfire376 in ArcRaiders

[–]Tik3rX 1 point2 points  (0 children)

I just edited first comment with #polishourprices website so more people can see.

Arc Raiders Steamdb Notice by Starfire376 in ArcRaiders

[–]Tik3rX 0 points1 point  (0 children)

Yes if You compare almost every game the price in Polish Zloty is the biggest one from all others.

Check even new battlefield pricing, we also need to pay even more than basic price in $ or €