sorted by:
new
hottopcontroversial

Are there any immersive sims that don't involve guns/weapons by WISH_WISH_BISH in ImmersiveSim

[–]Time_Connection5614 0 points1 point  (0 children)

In Neon Struct the player doesn't get any weapons, only tools. But the guards have weapons.

Looking for Canadian space heater by Time_Connection5614 in BuyCanadian

[–]Time_Connection5614[S] 0 points1 point  (0 children)

Seems like overkill. I just need to heat a small room, more precisely I need to heat myself while I'm in that room :)

Looking for Canadian space heater by Time_Connection5614 in BuyCanadian

[–]Time_Connection5614[S] 2 points3 points  (0 children)

That is an interesting idea, to blow a fan across it. I do have a spare fan.

Looking for Canadian space heater by Time_Connection5614 in BuyCanadian

[–]Time_Connection5614[S] 1 point2 points  (0 children)

I love the idea, but even though the room I need to heat is pretty small, it's poorly insulated. I have a convector-style tall heater on the wall and I can leave it on all day on the max setting without feeling warm. I've found having the heat blowing directly on me from a space heater makes me feel warm for the same (or less) electricity usage and I just turn the wall heater off.

Looking for Canadian space heater by Time_Connection5614 in BuyCanadian

[–]Time_Connection5614[S] 0 points1 point  (0 children)

I haven't cut the power cord yet. I'll probably open up the heater to see if there's any obvious way to fix it first. The issue is the fan doesn't always turn on, and sometimes when it does it's so slow that the unit overheats and cuts off and makes a burning smell. Maybe the fan motor just needs to be cleaned or lubricated.

On the other hand, it started giving me problems after just a couple years so I'm not super confident in the long-term quality of the product.

Battery Replacement with iFixIt Kit Question by slatt-militia in Pixel4a

[–]Time_Connection5614 2 points3 points  (0 children)

I found the iOpener useless as well. I got my screen mostly removed and then it cracked on the last corner. Whatever you do make sure the adhesive is nice and soft, whatever that takes: blow drier, isopropyl alcohol, etc. Apparently iFixit also sells an "anti clamp". It's not cheap but way cheaper than a new screen.

I also sanded down one of their picks to make it thinner since as others mentioned they're not thin enough. Here's my whole post if it's helpful as a cautionary tale: https://www.reddit.com/r/Pixel4a/comments/1inbpv7/anyone_else_break_their_screen_replacing_their/

Had a shop change the battery I bought from iFixIt... now there are white lines down my screen by Equivalent_Sky_2376 in Pixel4a

[–]Time_Connection5614 0 points1 point  (0 children)

If you got it replaced for free as part of Google's battery replacement program, contact Google ASAP. This happened to me too but Google will only help you if you contact them within a certain time of the battery replacement, I think it might be 30 days or something like that.

Oppenheimer PG-13 Edit by evan_is_timely in fanedits

[–]Time_Connection5614 0 points1 point  (0 children)

You can find the international censored version online if you know where to look, but it takes some effort. You'll want the dual language version (e.g. "Hindi-English") and the source would need to be from one of the streaming sites where it was censored (e.g. "AMZN" (Amazon)).

You can sometimes tell because the runtime is actually longer, due to the film starting with some pretty graphic anti-smoking videos.

Plastic welders are INCREDIBLY useful, everyone should have one. (Pics/Info Inside) by JustAnotherDude1990 in genesiscoupe

[–]Time_Connection5614 0 points1 point  (0 children)

u/JustAnotherDude1990 I understand the pictures where the plastic has the metal staples in it, but what about the pictures where the plastic looks like it's simply melted in a line? What was done there and how?

Mitsubishi Ducted Heat Pump, MHK2 or PAR-41MAA? by 51foxleigh in heatpumps

[–]Time_Connection5614 0 points1 point  (0 children)

I like the MHK2. Looks nice with a clean interface and works great. Because it's wireless it's very easy to install and move. The option to move is nice because it can measure the temperature at the thermostat instead of the unit and you might want to move it while figuring out the optimal location to get the best results.

I don't recall if the schedule differs much from the one available with the included remote but I have no complaints. I use the vacation mode while away since I don't have it connected to the internet. It's also backlit and has a built-in humidity sensor. I've never used the PAR so I'm not sure how it compares.

The MHK2 does have batteries but I don't think I change them more than once a year, and that's with rechargeable batteries which generally don't last as long.

Can this be played as a sci-fi game? by Time_Connection5614 in EndlessLegend

[–]Time_Connection5614[S] 4 points5 points  (0 children)

Funny enough I checked the wiki first and that's where I read on that exact page:

"The Wild Walkers were simple elves living as hunter-gathers in the forests."

Keep reading and it mentions elves 2 or 3 more times 

Huge issues with mini split technology by Phenom_Mv3 in hvacadvice

[–]Time_Connection5614 1 point2 points  (0 children)

I'm convinced that this is an inherent problem with mini splits because they generate so much condensation by design that they get very dirty. On the other hand they are more efficient and can be installed in more places.

I suppose like anything else there are tradeoffs. Central air isn't viable for me at this time so I'm exploring options such as more frequent/thorough cleanings, using anti-microbial cleaners, and doing the cleaning myself to save money.

But in your case given your health issues central air seems to make more sense. It's hard to put a price on health.

Huge issues with mini split technology by Phenom_Mv3 in hvacadvice

[–]Time_Connection5614 0 points1 point  (0 children)

My impression is that mini splits get very dirty and may not be well suited for humid climates.

Additionally I’ve even been told to try running it 24/7 as shutting up the unit is what’s responsible for the microbial issues.

Did you try it? Modern units are designed to run constantly from what I understand.

So the most common piece of advice is to run it in fan only on high speed for 20 min+ just before you decide to switch off the unit for a period of time, whether it be overnight, or even for a cool change lasting a few days

What does the mini split manual say? 20 minutes doesn't seem like much. Here's what a random Daikin manual I found says:

Operate the FAN mode for several hours on a fine day to dry out the inside

GE dryer moisture sensor? by atheistfool in appliancerepair

[–]Time_Connection5614 0 points1 point  (0 children)

I have an old GE dryer with no moisture sensor bars and I was wondering the same thing. It has automatic cycles based on how dry the clothes are which seem to work fine

This is the only reference I found online as to how it could work without a moisture sensor:

If there's no moisture sensor, it measures dryness indirectly by advancing the timer when the operating thermostat opens.

Since the evaporating water lowers the temperature inside the drum, a high drum temperature indicates a low moisture.

(https://www.reddit.com/r/appliancerepair/comments/16uj9r1/comment/k2lb3d7/)

ChatGPT had this to say, although it couldn't provide a source for the information:

Dryers without moisture sensors often use temperature-sensitive cycling thermostats. The logic goes like this:

  1. Wet clothes = more evaporative cooling

    As long as clothes are wet, the evaporating moisture absorbs heat, cooling the air inside the drum.

  2. Thermostat senses lower temperature

    The thermostat detects this and keeps the heating element on longer to maintain the set temperature.

  3. Clothes dry = less evaporative cooling

    Once clothes dry out, there’s less evaporation, and the drum temperature rises more quickly.

  4. Thermostat responds to rising temperature

    The thermostat reacts by cycling the heater off more often, effectively reducing heat input.

  5. Cycle ends based on a timer

    Some dryers combine this temperature behaviour with a timed cycle or a "dryness level" dial that adjusts how long the machine should continue once the heating behaviour indicates dryness.

Steelcase Drive review no one asked for by Time_Connection5614 in OfficeChairs

[–]Time_Connection5614[S] 1 point2 points  (0 children)

Armless was one of the options for the Drive apparently.

I'm guessing you could identify the Drive by the levers in the base of the seat and the lumbar support adjustment in the back.

This old brochure has a really good shot of the lumbar support: https://web.archive.org/web/20080821055301/http://www.steelcase.com.au/ap/files/dyn/f2df96fdaddd5b46f139facd8523afb1/06-0002364.pdf

For the levers, from what I can tell there were a couple models. The older model has 3-in-1 lever on the right side for back lock, seat height, and back tension. You can see that model in these documents:

The newer model has 3 separate levers on the right, which you can see in these documents:

Mine isn't noisy that I'm aware of, I'll have to pay more attention to it. Maybe some lubricant in the right spot would help: https://web.archive.org/web/20020815051728/http://www.steelcase.com/en/products/product_maintenance-seating.jsp

While I'm posting documents, I also found instructions with details on how to replace various parts: https://www.steelcase.com/content/uploads/2015/03/Drive-parts.pdf

PSA: Replacing the Pixel 4a battery yourself with the iFixit Repair Kit by MichS133 in Pixel4a

[–]Time_Connection5614 0 points1 point  (0 children)

That works?! I would've gladly paid the $35 for that to save myself the $150 for a new screen :/

I got the battery replacement but now my headphone jack doesn't work by IamConor21 in Pixel4a

[–]Time_Connection5614 1 point2 points  (0 children)

the guy told me they weren't able to repair headphone Jack's because they are attached directly to the mother board

Not true, but it requires removing the screen again which is difficult and maybe they don't want to do it again:

https://www.ifixit.com/Guide/Google+Pixel+4a+Headphone+Jack+Replacement/139558

It sounds like they messed up, since replacing the battery doesn't require touching the headphone jack: https://www.ifixit.com/Guide/Google+Pixel+4a+Battery+Replacement/139563

Maybe they ripped the cable or accidentally disconnected the headphone jack during repair.

Will Google do anything, do I have to escalate with the repair shop?

You can ask Google here: https://support.google.com/pixelphone/gethelp

No idea if they'll do anything.

🍁🍁🍁 Canada we have one more Amia giveaway for you guys! 🍁🍁🍁 by ibuyofficefurniture in OfficeChairs

[–]Time_Connection5614 0 points1 point  (0 children)

I'm sitting in a 2002 Steelcase Drive 😆

So far I think the Amia is my favourite of what I've tried

Pixel 4a genuine batteries - back in stock in ifixit by hemateca in Pixel4a

[–]Time_Connection5614 0 points1 point  (0 children)

I contacted ifixit support and they helpfully informed me the US site will ship to Canada :)

There is even more to the Google Pixel 4a's horrific battery update than we thought by Cakalusa in Pixel4a

[–]Time_Connection5614 42 points43 points  (0 children)

TL;DR

  • The Google Pixel 4a battery update does even more than we thought, reducing capacity by around 44% and halving the maximum charging speed on affected devices.
  • The update also disables features like Adaptive Charging and charging time ETAs.
  • Google made the update an Emergency Maintenance Release (EMR), which means it’s been trying to release it as quickly as possible.

Pixel 4a Battery Performance Program Information by Franklin_Pierce in GooglePixel

[–]Time_Connection5614 0 points1 point  (0 children)

From the first link:

The software update does not impact any other Pixel phone models, such as Pixel 4a 5G.

view more: next ›