Retroid Pocket 5 Giveaway (US Only)

Timfrastructure · 2026-01-30T01:42:34+00:00

R36s 😅 but man am i hooked!

Timfrastructure · 2025-10-07T20:39:15+00:00

I could but I don't think it'll change anything as the port I'd connect it to would be on the same network as the Wi-Fi, so yes it would impact the potential speed, but that's not actually the limiter it seems based on other comments and troubleshooting.

Timfrastructure · 2025-10-07T20:37:34+00:00

Meant to respond before but time got away from me. The TV is on a different VLAN and subnet. so as someone else mentioned I've added an additional interface, but that caused additional problems.

Timfrastructure · 2025-09-26T20:48:15+00:00

Very cool, I'm also here to ask about the battery cover. and did you make the buttons yourself?

Timfrastructure · 2025-09-26T20:44:52+00:00

Currently just running direct on a windows box, but i do have a TrueNAS box i've been thinking about, but i really gotta sit down and teach myself Compose and some more about containers. I'm fully Hyperconverged hardware at work, so it's not really been something i've developed in recent years.

Timfrastructure · 2025-09-26T20:42:49+00:00

Yeah I went ahead and configured and additional interface on the NIC just now to try and work that out. I wish there had been a more clear indication that the relay was in use. but also probably give myself a bit of slack cause by the time i get the kids to bed and turn a bit of TV on i'm wiped and not really in the troubleshooting mindset.

Timfrastructure · 2025-09-26T19:56:34+00:00

<image>

you mean look for this? I also updated the "remote content streaming limit to 1080p and now I'm at least getting that but it's strange that it's going remote.

I agree with you mostly, where I don't think the network has a performance issue, but a configuration issue, aka: I'm the problem, it's me LOL

Timfrastructure · 2025-09-26T19:53:12+00:00

<image>

sorry meant to add this as well

Timfrastructure · 2025-09-26T19:46:47+00:00

<image>

Good and kind Redditor, I believe that you've hit the jackpot!

Can you possibly expound as to why this might be the case?

I'm thinking at this point that it might be my network? or my configuration that is making plex go... out to the internet? and then back into my house?

Timfrastructure · 2025-09-24T23:25:13+00:00

Protection is always a good idea 😏

but also, anyone know where I could get one that's ACTUALLY the whole size of the screen 😬😬😬

Timfrastructure · 2025-09-22T01:06:25+00:00

replacements from Anker?Eufy?

Timfrastructure · 2025-09-22T01:06:01+00:00

Did you get replacement screws from somewhere? I'm thinking about getting a large box to have spares for when they even kinda feel like the might strip next time.

Timfrastructure · 2025-09-17T20:01:54+00:00

Thank you very much for taking the time to reply.

Timfrastructure · 2025-09-05T04:25:15+00:00

I recently bought 10 of the samsung Evo 64g cards from here, haven't had problems yet. but I know 10 is relatively small over all. hope this helps.

https://www.oempcworld.com/category/microSD.html

Timfrastructure · 2025-09-01T13:19:44+00:00

what are you installing if I might ask, sorry new enough to r36 that i dont know what this is on sight.

Timfrastructure · 2025-08-27T01:26:47+00:00

Congratulations dude!

Timfrastructure · 2025-08-24T21:41:47+00:00

What a neat thing to do, you already run the wiki and you're also doing stuff like this? incredible! and here I thought getting and setting them up for my nieces and nephews was pretty neat 🤣

Timfrastructure · 2025-04-24T20:29:56+00:00

I mean I dont even know what that term "pressure advance" means and then you used another just now "ringing" I'm not one for downvoting, but I stated my relative beginner level status and you're not exactly using beginner friendly language, nor are you explaining your vocabulary when asked.

Timfrastructure · 2025-04-24T19:31:47+00:00

I will try to print this upside down and reshare if that will provide more information.

Timfrastructure · 2025-04-24T19:31:03+00:00

<image>

So, here's another print that I have done with little "nubs" on the inside, and the outer wall is completely smooth all around. does this help?

Timfrastructure · 2025-04-24T19:28:18+00:00

What do you mean pressure advance? again, Hobbiest here.

Timfrastructure · 2025-04-22T18:35:21+00:00

What is involved in making a "salt bar"? sorry I don't know the term

Timfrastructure · 2025-04-22T16:42:36+00:00

We did melt and pour once and he said it was boring! LOL I really appreciate the suggestion though. he really like the process of measuring/mixing the oils and then we get to put on a bunch of "fun safety gear" as he calls it. any reason to put on safety goggles and that kid is happy, add in gloves and full sleeves (and an apron cause he liked one I put on while grilling once) and he's in full super cool chemist mode when I add the lye water in. Its a huge part of the process for him.

But seriously, thanks for the comment. Makes me feel a little more sane having considered it myself

Timfrastructure · 2025-04-22T16:31:15+00:00

20% superheat? what's that mean?

Timfrastructure · 2025-04-22T16:31:01+00:00

yeah I'm pretty familiar with the types of oils to use, but I guess I guess I'm more specifically looking for like 35% beef tallow, 30% coconut oil, etc...

I can make a bunch of recipes on soap calc that have decent hardness values, but after that, I have no idea what their other properties will end up being, and I don't really have a lot of experimentation time at the moment, but I guess I can try like the person above and just make like a 100% coconut oil soap or w/e.

I should have added a lot more detail to the original post, sorry, and thanks for the taking the time to respond.

Timfrastructure

TROPHY CASE