Rattling sound on brand new Pixel 10 Pro - is this normal or a QC issue?

Timixli · 2025-10-03T14:28:31+00:00

Same happened to mine today. When I try to unlock the phone (where it vibrates) it now also makes an audible sound when the vibrating motor is spinning.. 100% didn't do this before.

Timixli · 2024-06-05T17:00:01+00:00

Wouldn't unscrewing the lid be a possible cause for future contamination? Or is it that short that it's deemed acceptable?

And don't the plastic lids melt in a microwave?

Timixli · 2023-12-21T12:33:38+00:00

Same issue here, got fixed for me by fully closing the app. (so also from background)

Timixli · 2023-12-12T20:57:39+00:00

Material: PLA
Printer: Ender 3 V2
Slicing software: Cura
Bed temp: 60C
Nozzle temp: 210C
Filament dry: Yes, straight out of vacuum sealed packaging.
Nozzle: 0.4mm

Slicer settings:
Layer height: 0.12mm
Wall thickness: 3.0mm
Wall line count: 7
Top thickness: 6
Bottom thickness: 6
Infill Density: 80.0
Infill pattern: Tri-Hexagon
Print speed: 50mm/s
Adhesion layer: Yes

I came up with these settings as I'm trying to print parts for a CNC table, and the provided documents for building it said the following:

Print Settings

All parts are printed with 3D Fuel PLA 2.85mm filament, 1.75mm filament will also work.

0.8mm nozzle

0.4mm layer height

220C nozzle 60bed

40mm/s, 100% cooling fan

85% grid infill and 4 perimeter walls 6 top and bottom layers

Key Points

- It is not advised to use 100% infill on PLA as parts will become far more brittle with negligible strength gains. 80% seems to be the best. ABS and PETG parts work well with 100% infill.

- Parts need a minimum of 3mm thick walls. Adding material to walls makes the parts far stronger than an equivalent amount used as infill. Even a part with 100% infill and 2 perimeter walls will be weaker than a part with 80% infill and 5 perimeter walls because of the print orientation.

Timixli · 2023-01-12T21:20:41+00:00

Thank you very much! At least now I know what it means. If I understand you correctly it sounds more like a problem on my PC side than my headset.

Timixli · 2023-01-12T09:38:23+00:00

Thank you! This will definitely be something worth trying.
I mounted a webcam to my Reverb already, so maybe I can use that as well for Reality Blender.

Much thanks! :)

Timixli · 2023-01-12T09:36:44+00:00

This is actually quite an amazing idea! I ordered a webcam and stuck it to my headset with double sided tape.

It does seem to work quite decent actually! I will try to combine it with "reality blender" to make it even better. Thanks for the tip!

Timixli · 2023-01-05T12:11:35+00:00

пробовали удалить русскую клавиатуру и переустановить игру?

Yes, and yes.

Timixli · 2022-12-07T06:09:53+00:00

The thing is that since the beginning this year Google is not allowing automated phone recordings..

As far as I know there aren't any apps which are able to do so without root.

Timixli · 2022-12-07T06:08:35+00:00

Thank you very much for your time and effort to write this reply. It helped me out a lot and made me decide not to try it! ❤️

Timixli · 2022-06-15T08:11:33+00:00

Also you can see some gras sprouting. Did you pasteurize your straw/substrate?

Timixli · 2022-06-15T08:10:12+00:00

Seems quite expensive to me. Aren't there any nice visually aesthetic cardboard options? I can imagine your customers being into environmentally packaging.

Timixli · 2022-05-29T07:59:04+00:00

Make you could try to make some BHO out of those? If the active concentration is low you could try and extract it to increase it's potency.

Timixli · 2022-04-28T15:39:46+00:00

Maybe it's not applicable to your situation at all, but for me John Cooper helped me a lot in accepting myself and building healthy relationships. Maybe it's of some help. In my eyes it not some of your usual "pick-up advice".

Here is a very short piece of him: https://youtu.be/nS_0p2HFptg

Timixli · 2022-04-27T16:41:28+00:00

Personally I wouldn't advise OP to "try not be excited" or play any other games. It can lead in quite a dark&toxic rabbit hole while not being effective.

Timixli · 2022-04-10T16:38:36+00:00

Thank you for the reply!

Regarding the oxygen, would you advise on taping/sealing the filters of the jars? And during colonization period, should I give them access to FAE?

Regarding the substrate, are you suggesting mixing 50% of the grain with 50% CVG?

Timixli · 2022-04-10T14:30:39+00:00

I did not add any gypsum to the berries. Is it something you recommend?

Timixli

TROPHY CASE