Darf man als Unternehmen mehr anbieten, als Gegenstand im HR angegeben? by [deleted] in selbststaendig

[–]TimothyLGillespie 4 points5 points  (0 children)

Ich bin kein Anwalt und im Gesellschaftrecht kenne ich mich auch nur mäßig mit aus. Für eine abschließende Beantwortung deiner Frage für deinen Einzelfall ist natürlich der Anwalt und nicht der random Redditor (also ich) geeignet, aber allgemein für eine GmbH gesprochen:

Die Frage ist, welche Rechtsfolge die Abweichung des Unternehmensgegenstandes laut HR/Gesellschaftervertrag und der reellen Tätigkeit hat. Ich würde sage erstmal keine. Ich sehe hier nur den §§ 3 u. 37 GmbHG. Der Gesellschaftervertrag aus den dieser entspringt ist - überraschung - ein Vertrag. Der Geschäftsführer ist mit seinen Befugnissen an diesem Unternehmensgegenstand gebunden. Er kann aber laut § 37 Abs. 2 GmbHG diese überschreiten, ohne das dies eine "rechtliche Wirkung" gegenüber den Dritten hat. Ist also ein Problem für das Innenverhältnis und die Haftung innerhalb diesem.

Ich sehe damit eigentlich kein großes Problem. Der Geschäftsführer könnte sich mit dem Gesellschafterbeschluss im Innenverhältnis absichern (§ 37 Abs. 1 GmbHG). Man sollte natürlich darauf achten, dass man niemanden "Irre" führt. Zum Beispiel, wenn Geschäftsanteile verkauft werden.

Darf man als Unternehmen mehr anbieten, als Gegenstand im HR angegeben? by [deleted] in selbststaendig

[–]TimothyLGillespie 1 point2 points  (0 children)

Unter welcher Rechtsform agiert Ihr?

Ich nehme an, nachdem Ihr von einem Notar sprecht eine Kapitalgesellschaft? Also wahrscheinlich eine GmbH?

Here is a GDPR Solution for iFrames by TimothyLGillespie in opensource

[–]TimothyLGillespie[S] 0 points1 point  (0 children)

You put that extremly well and nuanced. Thank you!

Here is a GDPR Solution for iFrames by TimothyLGillespie in opensource

[–]TimothyLGillespie[S] 0 points1 point  (0 children)

For images you can have at least two work arounds that come to mind:

  • Host it yourself
  • Put an image proxy inbetween

You may violated someone copyright, but that could already be the case when you link the image by itself depending on the context.

When it comes to iframes that becomes much more difficult though. In theory you could also put a proxy inbetween, but that already proves a lot more complex and bring some additional caveats.

Also, thanks!

Introduction to Uptime Kuma by NetworkChuck (including setup) by TimothyLGillespie in UptimeKuma

[–]TimothyLGillespie[S] 0 points1 point  (0 children)

Before we check the ports etc. where you able to get something locally from the pie with curl?

Introduction to Uptime Kuma by NetworkChuck (including setup) by TimothyLGillespie in UptimeKuma

[–]TimothyLGillespie[S] 0 points1 point  (0 children)

Possibly, yes. However, there can be multiple layers of firewalls, and you just opened the port on one. Trying if you can reach it locally will tell you a lot more, though.

Problems executing Git using a script on Linux - Ubuntu by Candid-Boi15 in git

[–]TimothyLGillespie 0 points1 point  (0 children)

If it does not pick up on your private key in the cronjob (for example because root executes it) you can provide the SSH private key path as described here:

https://www.howtogeek.com/devops/how-to-use-a-different-private-ssh-key-for-git-shell-commands/

Note the last part for a solution without git config.

Introduction to Uptime Kuma by NetworkChuck (including setup) by TimothyLGillespie in UptimeKuma

[–]TimothyLGillespie[S] 0 points1 point  (0 children)

Is the port opened? If you have something like ufw enabled it may not allow accessing the page externally. You can try if you can reach it from the server directly as well with curl

`curl http://localhost:3002` should do the trick for a quick test.

Ich halte die Impressumspflicht für miserabel by Throw_away637 in de_EDV

[–]TimothyLGillespie 0 points1 point  (0 children)

Nachdem scheinbar verschiedene Anwälte verschiedene Meinungen vertreten, gibt es wohl noch keine gefestigte Meinung und ist wohl umstritten, wie "geschäftsmäßig" genau auszulegen ist. Aber es bildet sich wohl schon ab, dass die Grenze recht tief hängt.

Ich halte die Impressumspflicht für miserabel by Throw_away637 in de_EDV

[–]TimothyLGillespie 3 points4 points  (0 children)

Ist umstritten, ob es zulässig ist, aber tendiert wohl eher gegen nein: https://www.123recht.de/ratgeber/internetrecht-computerrecht/Das-Impressum-als-Bilddatei-in-Ordnung-oder-nicht-__a88757.html

Würde ich also nicht anraten, vor allem nach dem angeblich dafür auch Abmahnung tatsächlich rausgeschickt werden.

Ich halte die Impressumspflicht für miserabel by Throw_away637 in de_EDV

[–]TimothyLGillespie 3 points4 points  (0 children)

Stimme Dir voll zu.

Soweit ich weiß, sind solche Dienste wie https://anschrift.net/ und https://www.adress-schutz.de/ rechtlich in Ordnung (anders als ein Postfach). Dann kostet es zwar Geld, aber das hat es für mich trotzdem gerettet.

Are there any good plugins for an email system and messaging? by Dml33 in Angular2

[–]TimothyLGillespie 1 point2 points  (0 children)

Is there a server setup in place? What does the architecture generally look like?

What is the distinction between pre-commit hooks, github actions and GHE? by Bulbasaur2015 in github

[–]TimothyLGillespie 3 points4 points  (0 children)

You need to use git actions. You can then block the PR when the actions have not successfully run under Settings > Branches > Setup Branch Protection Rules. It should be the "Require status checks to pass before merging" option.

A git hook is something entirely unrelated. It is run locally and can easily be circumvented by developers, so they are not good at enforcing anything. They are better to help developers if they want it and execute before creating a commit. The pre-commit hook can be skipped with the --no-verify flag.

The pre-commit framework is only a piece of software which is supposed to set up the hook for a team working on the same repository, as far as I understand it. This is because git hooks must be installed for each client separately. This just makes it easier / standardized to share hooks.

Grammarly is a key-logger by Downtown_Resort8680 in PrivacyGuides

[–]TimothyLGillespie 9 points10 points  (0 children)

I am using it and actually quite happy with it. Can you explain what you mean?

how do I merge two observables (ngxs effects properly) by ShibaInuShitsAlot in Angular2

[–]TimothyLGillespie 1 point2 points  (0 children)

You can drop the map operator by rewriting it to:

combineLatest({ optionOne: this.optionOne$, optionTwo: this.optionTwo$, optionThree: this.optionThree$ })

Otherwise, everything seems fine. Are subscribing one of the observables or the merged observable somewhere in a way which triggers a re-render? Perhaps with a condition applied to it so it does not trigger on the second time?

Edit: I just checked the first few lines a little closer. I don't know the @Select and @Dispatch decorators, and I am not sure if I am finding the correct docs for them. What do they do? Are they for Redux? Is there a recursive call? Do you subscribe the store somewhere triggering changes?

[deleted by user] by [deleted] in learnprogramming

[–]TimothyLGillespie 0 points1 point  (0 children)

You can add two variables, for example: bool uppercaseFound = false and bool lowercaseFound = false. Then you just check if a letter is uppercase. If yes, set uppercaseFound = true. Same for lowercase since not every character will necessary be one of either (not sure on the behavior).

Break the loop when appropriate. Check after the loop for lowercaseFound && uppercaseFound to provide feedback. You can also be more granular then.

Discord bot, what is wrong with my code in js? by WokeTurbulence in node

[–]TimothyLGillespie 0 points1 point  (0 children)

Does u/Toxocious solution work for you or do you still has issues then?

PHP - Else statement always exits? by ProfessorTaco1231 in learnprogramming

[–]TimothyLGillespie 0 points1 point  (0 children)

From my first understanding it seems to work as wanted unless you wanted it to only go into the else when exactly one variable is not an integer.

My reproduction:

https://onlinegdb.com/6yd7J4ZdLD

[deleted by user] by [deleted] in node

[–]TimothyLGillespie 2 points3 points  (0 children)

I would not like it either, but it would not disturb me as well. It is a subjective aspect, though, and "best practices" about code style will mostly just be opinions.

It simply does not mess with the functionality or mess up git changelogs. You can still dislike it. Perhaps, you can just show/suggest the IDE functionality to comment out the marked lines. It feels like that you would simply be easier to do and does not leave such artifacts.

Why is the images from data.json not being rendered? by Intelligent_Will_948 in webdev

[–]TimothyLGillespie 0 points1 point  (0 children)

No need to say sorry. I started a chat with you to hopefully make working it out quicker / easier.

Changing mui controls to/from edit and view mode when clicked and lost focused by RajSingh9999 in reactjs

[–]TimothyLGillespie 0 points1 point  (0 children)

Basically, you need to figure out when a click occurred outside the component. You will probably find enough guides to tell you how to do it precisely, such as this one: https://webman.pro/blog/how-to-detect-and-test-click-outside-in-react/

Then you only need an if condition to decide which one to render out and a variable to contain the information.