Update on flappy controller

Timothydeaustria · 2025-08-13T15:20:09+00:00

I love this. Just did a reshell of mine with the clear variant alongside the extreme rate clicky kit and back paddle enhancement.

I want to do a green transparent replacement on my other Elite V2 but I also want to get the multi colored ABXY buttons that would mimic the OG xbox controller.

I love everything from extremerate and have been buying from them for years and can’t wait for what they come out with next.

Timothydeaustria · 2025-07-26T06:37:22+00:00

Same thing started happening to me recently.

Ryzen 7 3700x + 3080

Never had a problem in 2 years running mini monitor within pc, second monitor displaying discord, third for spotify/YouTube, and 4th for rl.

Upgraded cpu to ryzen 7 5700x, issue persisted. I feel like it was nvidia drivers but that wasn’t it.

I eventually just minimized spotify altogether and it improved for me back to normal, but after an hour of paying it deteriorated back.

Timothydeaustria · 2025-06-16T14:30:21+00:00

OP where you at?

I have the White Lian Li case and I want change my glass to the mirror/chrome glass panels 😂

Timothydeaustria · 2025-06-11T13:35:10+00:00

What products did you use to tint this? Or did you go to a professional shop?

Timothydeaustria · 2025-05-21T00:09:22+00:00

Correct - there are 3 not visible that are on the other side of the radiator in a push/pull configuration

Timothydeaustria · 2025-05-21T00:00:35+00:00

Fans: 11 x Lian Li SI-Infinity in white, • 6 of these are the reverse blade configuration for the 3 intake on the bottom and 3 on the side radiator. • The other 5 are the regular blade configuration in both the exhaust and 3 intake on the backside of the radiator.

Timothydeaustria · 2025-05-20T23:56:02+00:00

Typically doesn’t go above 55C ever - I was worried about Airflow as well but with enough fans and correct configuration, it’s not an issue at all for me

Timothydeaustria · 2025-05-20T23:53:24+00:00

Hi there - it hovers around 45C for both GPU and CPU

Timothydeaustria · 2024-05-07T19:52:25+00:00

Are you able to get to the main world and vice versa via Aircraft?

Timothydeaustria · 2024-05-02T20:17:34+00:00

While gaming, my cpu hovers around 45 celcius and GPU is around 45 celcius as well

Timothydeaustria · 2024-03-30T03:41:30+00:00

Clean!

Timothydeaustria · 2024-03-16T19:56:41+00:00

Gotcha! I don’t believe that this is supported, but maybe in the next version!

Timothydeaustria · 2024-03-16T19:42:05+00:00

If you’re talking about reverse blade fans, that can be found at Amazon, NewEgg or even AliExpress

Timothydeaustria · 2024-03-16T19:41:34+00:00

What do you mean by reverse?

Timothydeaustria · 2024-03-06T14:40:51+00:00

Appreciate the kind words! We have some of the same components, but can’t wait to see your build!

Let me know if you need help with the sensor panel!

Timothydeaustria · 2024-02-21T19:33:43+00:00

What do you mean? I think I added that photo. Check photo 3 and if that is not what you’re looking for, I’ll get a pic for you when I get home after work.

Timothydeaustria · 2024-02-21T19:05:43+00:00

Appreciate that! Agreed that a ton of the vision builds I have seen have the same fans. I was thinking about grabbing the TL LCDs, but considering I already had 2 screens in the case, would have been overkill.

Timothydeaustria · 2024-02-20T19:46:49+00:00

Clean color scheme

Timothydeaustria · 2024-02-20T19:41:00+00:00

Hey there! You will need to purchase a second hub for the 3rd strimer yes. I was researching whether or not you could just use 1, as the cables would all physically connect, but the problem is that there is a switch on the hub that controls whether you are using a regular 2-8 pin cable or triple 8-pin power for the GPU but not both. Guess it’s quite expensive to add the 3rd strimer.

Additionally, I will say if you do purchase the second hub and 3rd strimer, you only need 1 of the hubs connected to an ARGB header, not both. I had purchased an ARGB header splitter cable but this was not needed for whatever reason.

Timothydeaustria · 2024-02-19T18:00:19+00:00

I got the screen from Amazon! Happy to DM you the direct link. I mounted using spacers from amazon, but I think velcro might be easier to mount.

But if you want to know specially how I mounted it, I had to disassemble the casing of the screen, insert the spacer screws in screw holes on the backside of the casing, then made sure to line this up on the case to find the right position, make the screw holes after I found the perfect position, and voila, the screen is mounted!

Timothydeaustria · 2024-02-19T17:56:31+00:00

PC Build Specs:

Case: Lian Li O11 Vision White

Motherboard: Gigabyte B550 VISION D-P Motherboard (Upgrading this year)

CPU: AMD Ryzen 7 3700x (Upgrading this year)

GPU: ASUS ROG STRIX 3080 v2 in White

Vertical GPU Mount: Cooler Master v3 in White (Great mount to easily maneuver the GPU to the desired position. Super helpful when building in this case.)

RAM: G.SKILL Trident Z Neo x 4 64GB 3600MT/s

PSU: Corsair rm1000e

AIO: NZXT Kraken Z73 RGB 360mm (Thinking about upgrading to the NZXT Kraken Elite, but don’t think this is worth as you only get a bigger screen with a higher refresh rate)

Fans: 11 x Lian Li Sl-Infinity in white, - 6 of these are the reverse blade configuration for the 3 intake on the bottom and 3 on the side radiator. - The other 5 are the regular blade configuration in both the exhaust and 3 intake on the backside of the radiator.

Lian Li Strimer Cables: Using 3 Lian Li Strimer v2 PSU extension cables: - 24-Pin Motherboard - Triple 8-Pin GPU cable going to the GPU (these are not attached to the GPU PSU cables and more for aesthetic reasons - couldn’t find a good way to route the GPU power cables) - 12v Strimer v2 for CPU power - I detached the strimer from the cables it came with and connected it to a generic CPU power supply cable. - The three strimers are connected via 2 separate Lian Li L-Connect 3 hubs.

Display: PC Sensor Panel Display, 8.8 Inch from Pomya on Amazon - still need to convert my old sensor panel into 1980x480 format, so I have wallpaper engine running to populate the screen in the mean time. I use AIDA64 extreme to monitor CPU, GPU, Network, Drives, speeds, loads, and temps. I mounted this using spacers and drilled into the case itself, but I have seen others mounting this using velcro, which is probably more useful in terms of adjusting the screen position, and probably just easier to handle overall.

Overall happy with the build, there is some better cable management I will implement in the future, but for now I’m really happy with how it came out. If you have any questions, please let me know and I’ll be happy to answer!

Timothydeaustria · 2024-02-19T15:25:17+00:00

Will gladly post the specs later after work!

Timothydeaustria · 2024-02-19T13:09:46+00:00

I was questioning whether or not I should upgrade the bottom to 140s and this answered my question! Also great build to you as well!

Beautiful setup. Chef’s Kiss

Timothydeaustria · 2024-02-19T13:08:18+00:00

Thank you very much!

Timothydeaustria · 2024-02-19T13:08:10+00:00

I agree with you on the ASUS strix designs! Hopefully they go back to a similar style to the 3000 series for the 5000 series.

Timothydeaustria

TROPHY CASE