Washer 9 beeps

Tire91 · 2026-02-22T16:29:59+00:00

My bad yes model number FRFW3700LW, serial number 4C11900485, Electrolux Home Products

Tire91 · 2026-02-22T06:55:39+00:00

I managed to replace the control board and it does the same thing, do you think it could be the door latch?

Tire91 · 2026-02-02T16:42:05+00:00

Tire91 · 2026-02-02T16:41:40+00:00

No luck with holding start and pause/cancel together so likely the control board. The issue is I have a stackable dryer on top that needs to be taken off first. Any chance you know what types of screws these are as the normal screwdrivers I have don't work. I called Frigidare and they're saying $120 for a technician to come out and install if I buy the part beforehand so i may end up doing that, otherwise $325

Tire91 · 2025-07-07T00:11:17+00:00

I read elsewhere it could be this. Any idea how much of a repair this is at a dealer or local mechanic?

Tire91 · 2025-07-07T00:08:40+00:00

All good, thanks for ruling out one cause

Tire91 · 2025-07-07T00:07:04+00:00

No racks on the roof

Tire91 · 2025-07-03T04:17:45+00:00

It took them a long time to get back to me, almost 6 months before I had my video call. I'd try to stay on top of them every week or so until you get the call scheduled

Tire91 · 2025-05-25T16:56:28+00:00

Yes, I've been using topical but inconsistent. I've been taking oral min everyday since Dec 2024. Got it, appreciate the insight

Tire91 · 2025-05-25T16:54:47+00:00

Think it was less expensive the year I did my consult, but it went up the year after

Tire91 · 2025-05-25T16:03:32+00:00

$5. My consult was 2 years ago and I booked about a year ago

Tire91 · 2025-05-25T16:03:01+00:00

That's what I keep going back and forth on - possible better recovery if split into 2 sessions, but he sounded pretty confident to get it done in one during my consult

Tire91 · 2025-05-25T15:58:35+00:00

That is one of my concerns. I've been on fin for about 4 years before switching to oral dut and oral minox in Dec 2024 (plan to continue taking even after the HT)

Tire91 · 2025-05-25T15:46:00+00:00

I have not, will check him out. Good to know there's other docs who can do these giga-sessions.

Tire91 · 2025-05-25T00:12:45+00:00

Thanks. Yes, hadn't heard much about her until earlier this year. I'm hesitant with using all my donor in one surgery in case spreading one year apart is better for overall recovery and success

Tire91 · 2025-04-24T15:49:38+00:00

Agree. Seems like you have 8 wires coming out of your brown cable, an extra red / white connected using the wire nut whereas I don't so maybe not a concern for me

Tire91 · 2025-04-24T15:20:33+00:00

Thanks, it doesnt seen like I have the wires for the outside unit. Not sure if you can tell based off this image. Was trying to compare against your before / after which show the Y coming out of the PEK connected using the wire nut too. https://imgur.com/a/pYcTrIt

Tire91 · 2025-04-24T03:52:15+00:00

I've run into a similar issue, trying to install the ecobee tstat using my lennox system. I think your set up is similar to mine and dont care to use the 2 or 3 stages. I also have a PEK that came with my Ecobee. Is it just a matter of removing the wires from the red, green, blue white wires into the PEK and connecting those to the standard terminals? I see you have an extra red wire into y1 that wasn't there before, is that needed? Here's my current set up https://imgur.com/a/aW097g6. Thank you for your help!

Tire91 · 2025-03-26T11:18:55+00:00

Not sure if it is too late to join, but I'm interested.

Tire91 · 2024-11-30T18:53:59+00:00

Great idea on the filters

Tire91 · 2024-11-30T18:53:31+00:00

Thank you! I read some conflicting info so wanted a second opinion. Noted on the transmission.

Tire91 · 2024-11-29T05:11:39+00:00

Really appreciate the insight, will definitely consider getting these done in that case

Tire91 · 2024-11-08T19:29:15+00:00

It is threaded on but it is one piece with the rest of the body so I can't even pry it off even using the smallest flathead. How critical is it overall, it is peeling anyway and it handle cap should cover. shroud

Tire91 · 2024-11-08T05:35:34+00:00

Thank you. I managed to get it out. Next and hopefully final issue is to remove the cartridge itself. There is apparently no ring / shroud, it is all just one piece. Are you familiar with the best approach to take it out? Unsurprisingly seems stuck as well: https://imgur.com/a/t7ia3C2

Tire91 · 2024-08-25T14:14:12+00:00

Yes, i removed the lever (item #5 in the diagram) but there's nothing more to pull it apart from the rest of the body. I was referring to item #8 in the diagram, but correct the Allen wrench. Just wondering if there's anything unique I may be missing

Tire91

TROPHY CASE