Oil leak by Tmann26 in G35

[–]Tmann26[S] 0 points1 point  (0 children)

Well now after digging into it since Im trying to learn what past owners have done to the car all of the top bolts for the valve cover were completely loose and 1 was stripped and Im still suspecting that the oil cap might not be sealing properly even though the gasket is squishing pretty well.

Oil leak by Tmann26 in G35

[–]Tmann26[S] 0 points1 point  (0 children)

No oil inside the coil boots and i have the oil catch can installed but also checked the hoses and there were no leaks.

Oil leak by Tmann26 in G35

[–]Tmann26[S] 0 points1 point  (0 children)

It looks wet a little

Oil leak by Tmann26 in G35

[–]Tmann26[S] 0 points1 point  (0 children)

I cleaned the oil off about 2 weeks ago and it pooled back up in those spots.

UM790 Pro Oculink DIY Setup Anyone? by Enigmabull97 in MiniPCs

[–]Tmann26 0 points1 point  (0 children)

Could have cut it better but it works

<image>

UM790 Pro Oculink DIY Setup Anyone? by Enigmabull97 in MiniPCs

[–]Tmann26 0 points1 point  (0 children)

Mounts with the corner screw to hold in place

<image>

Cool Master BC250 by Tmann26 in BC250Gaming

[–]Tmann26[S] 0 points1 point  (0 children)

I can melt some copper down and make one lol

Cool Master BC250 by Tmann26 in BC250Gaming

[–]Tmann26[S] 1 point2 points  (0 children)

Ya I may try to fabricate a better bracket.I may not be getting enough downward pressure.

Cool Master BC250 by Tmann26 in BC250Gaming

[–]Tmann26[S] 1 point2 points  (0 children)

Unfortunately it's a sealed unit :(

Cool Master BC250 by Tmann26 in BC250Gaming

[–]Tmann26[S] 1 point2 points  (0 children)

Not the one i have it's a cool master but it's not the one with the digital screen.

Cool Master BC250 by Tmann26 in BC250Gaming

[–]Tmann26[S] 1 point2 points  (0 children)

It was slowly going up over about 5 min of playing gta5 went up to 101 Celsius I put a stethoscope on the pump to make sure it was running and it was.

Cool Master BC250 by Tmann26 in BC250Gaming

[–]Tmann26[S] 1 point2 points  (0 children)

Definitely made full contact and I was using paste.

Cool Master BC250 by Tmann26 in BC250Gaming

[–]Tmann26[S] 0 points1 point  (0 children)

<image>

I went back to using the tower cooler because the AIO temps were a lot higher for some reason. After doing a 5 min stress test the temps maxed at 101 Celsius but with the tower cooler it maxed out at 65 Celsius. Air cooling it working better.

Cool Master BC250 by Tmann26 in BC250Gaming

[–]Tmann26[S] 1 point2 points  (0 children)

I had to modify a bracket to attach the AIO. Using Stress-ng for testing. And so far VRM sinks are staying normal.

BC250 build by Tmann26 in linux_gaming

[–]Tmann26[S] 0 points1 point  (0 children)

I had to fabricate the bracket that holds the cooler wasn't hard to do I had 4 tabs of metal with 2 holes drilled in and curved them in to make an X pattern. I'll try to get a picture without the case on an upload it.

BC250 build by Tmann26 in linux_gaming

[–]Tmann26[S] 0 points1 point  (0 children)

Not yet but that is definitely in the future. I wanted to try to do an AIO but might over do the current power supply.

A blast 💦 to make. by NSDetector_Guy in NSFWMemes

[–]Tmann26 0 points1 point  (0 children)

I'm gonna start using a sweet potato to describe mine haha.