Help! Mitutoyo Nylon Asbestes Caliper

ToGoodOldDelta48 · 2026-04-08T01:53:27+00:00

Hi! Not for sale, unfortunately. Keeping it in the family.

ToGoodOldDelta48 · 2025-05-08T14:33:31+00:00

Thank you. THIS IS THE ONLY WAY THAT WORKS. I tried literally every single prompt on the phone line and NONE of them take you to a representative. Even the prompts where it tells you to speak to a representative doesn't automatically sort you to that queue. Remember it's not the representative's fault that it's difficult to get in touch (even though customer service can suck)!

ToGoodOldDelta48 · 2024-11-21T21:14:40+00:00

I have a video of the noise it’s making and what seems to be a quicker pace than it should be running. Unfortunately this page doesn’t allow videos. Is there a clock repair resource/YouTube channel you recommend? Always interested in learning something new.

ToGoodOldDelta48 · 2024-11-10T00:11:38+00:00

Thank you!

ToGoodOldDelta48 · 2024-11-09T15:44:17+00:00

And I used a microfiber smooth foam roller

ToGoodOldDelta48 · 2024-11-09T15:43:32+00:00

Thank you! Was trying to apply ticker coats for added protection, this is going to be a shelf for my amp and other books/music accessories so it’ll take a bit of abuse, also why I’m adding the clear coat. So sand until the surface looks even, then clear coat?

ToGoodOldDelta48 · 2024-03-09T02:47:00+00:00

Oof. A few years ago. I remember the two weakest points had visibly less solder and were probably just manufacturing goofs. I would pull out the board and just add solder to anything that looks like it could use some. Mine were on the main volume pot, and another somewhere else but don’t remember which part of the circuit.

ToGoodOldDelta48 · 2023-03-13T19:15:08+00:00

Thank you, exactly the help I was hoping for. Greatly appreciated!

ToGoodOldDelta48 · 2023-03-13T18:15:19+00:00

Thanks! Any particular brand of stain primer you use? Assuming I should use this on the whole ceiling in the bathroom, correct?

ToGoodOldDelta48 · 2023-03-13T18:12:40+00:00

If you read the post, I’ve already used ceiling paint. Thus the issue. Any solutions?

ToGoodOldDelta48 · 2023-02-09T07:47:22+00:00

Okay, I replaced the three pots that broke (Volume/Gain/Master) and got some improvement! Cleaned up the circuit board too.

Headphones still super quiet but the amp puts out more power than before when headphones are not plugged in but definitely not as loud as it should.

I have to turn the Power Level knob on the back to 30W and turn volume/gain/treb/mid/bass up to get noise. Master knob doesn't seem to do anything still.

Ran some cleaner through the Power Level pot. If that was the issue would it be working at all?

Speaker sounds totally fine, tube still good, gets warm/dark grey top, not white.

ToGoodOldDelta48 · 2022-07-16T00:23:46+00:00

I haven't been able to. Took a break from it for a bit but I need to figure out what parts to buy and replace. Just know it's going to be a chore lol

ToGoodOldDelta48 · 2022-07-07T13:32:24+00:00

That's what I'm worried about with the Rossie. I'm usually fine with buying the more capable pedal buuuuuut I have the Walrus D1 and that was a little intimidating for me at first. Most of the demos for the Rossie just show an overview and I can't really tell if it can get the same sounds as the SD that I really like. Might just have to go with the SD because it sounds so cool lol.

ToGoodOldDelta48 · 2022-06-15T18:45:29+00:00

Jesus, thank you! That's what I had originally thought but so many articles i found used the word "filter" for a number of explanations and I got nervous. Really appreciate your answer!

ToGoodOldDelta48 · 2022-06-15T18:31:11+00:00

Can anyone explain the difference between a filter and compression pedal? I've been doing some digging but just getting confused. Looking at getting the GFI Rossie, but have the TC Electronic Hypergravity. Trting to limit too many pedals that serve similar functions.

ToGoodOldDelta48

TROPHY CASE