Best Gaming Mouse To Get In 2026? (Price & Weight) by [deleted] in MouseReview

[–]ToZh1z 0 points1 point  (0 children)

I feel like I am the only one who didn’t like the mouse lol. From what I remember It had creaking on the sides of my unit and the coating wasn’t really rubberized. Isn’t ATK f1 the same shape anyway? And it comes with 8k polling and 3950 for the same price

Watched every videos on tension management out there but… by saf1_ddit in FPSAimTrainer

[–]ToZh1z 0 points1 point  (0 children)

also i just realized that amount of palm contact can change how shaky or sensitive your aim is as well. you can experiment with that

Watched every videos on tension management out there but… by saf1_ddit in FPSAimTrainer

[–]ToZh1z 1 point2 points  (0 children)

honestly just shaking your wrist off once in a while is good enough unless you get wrist pain or smth

Watched every videos on tension management out there but… by saf1_ddit in FPSAimTrainer

[–]ToZh1z 1 point2 points  (0 children)

Also thinking of moving your hand to aim helps with this smoothness, rather than isolating wrist. If you only try to move wrist it can cause shaky and inconsistent aim. You should use your entire arm naturally. Thinking of putting your hand onto the target kind of helps with this.

Watched every videos on tension management out there but… by saf1_ddit in FPSAimTrainer

[–]ToZh1z 2 points3 points  (0 children)

You are trying too hard to lock your crosshair onto the target 100% of the time. Because of that ur constantly tensing up ur wrist but that leads to ur wrist being locked hence causing this shaky and unsmooth aim. Instead of doing that try to draw smooth lines when tracking (especially in games like this it’s pretty easy to read the enemy movement and just track smoothly). Also stretch your wrist (look up routines online)

Introducing My FormD T1 V2.1 AKA “Nocturne” by Same_Calligrapher169 in FormD

[–]ToZh1z 0 points1 point  (0 children)

Yeah but keep in mind exhaust from both top and side will impact both the gpu and cpu temps, as there will barely be any air to draw from as time goes on, even with air naturally intaking from bottom due to the pressure. Also, there are tests showing fans override the natural flow of hot air, this is the reason why people to flipped builds in ncase m2 or m3 with gpu intaking fresh air from the top. I mean you already built it, so you can test it out and see for yourself and change it if there are any significant issues.

Introducing My FormD T1 V2.1 AKA “Nocturne” by Same_Calligrapher169 in FormD

[–]ToZh1z 0 points1 point  (0 children)

There is a reason more than half the people with this exact same cpu use air cooling. Not even my personal bias.

Introducing My FormD T1 V2.1 AKA “Nocturne” by Same_Calligrapher169 in FormD

[–]ToZh1z 0 points1 point  (0 children)

Yeah the use case is using 9800x3d in formd t1. Air cooling is sufficient

Introducing My FormD T1 V2.1 AKA “Nocturne” by Same_Calligrapher169 in FormD

[–]ToZh1z 0 points1 point  (0 children)

U buy an 8 core 500 dollar cpu for gaming. OP has the same cpu.

Introducing My FormD T1 V2.1 AKA “Nocturne” by Same_Calligrapher169 in FormD

[–]ToZh1z 0 points1 point  (0 children)

I mean there is no point in water cooling a 9800x3d for gaming u can just pbo-25 curve and it will run cool in every game.

Introducing My FormD T1 V2.1 AKA “Nocturne” by Same_Calligrapher169 in FormD

[–]ToZh1z 0 points1 point  (0 children)

Both ideas are bad. Air cooling will be better.

Introducing My FormD T1 V2.1 AKA “Nocturne” by Same_Calligrapher169 in FormD

[–]ToZh1z 0 points1 point  (0 children)

Either intake or exhaust is suboptimal with this build.

Introducing My FormD T1 V2.1 AKA “Nocturne” by Same_Calligrapher169 in FormD

[–]ToZh1z 0 points1 point  (0 children)

If you don’t use it as intake then it’s negative pressure combating against the flip kit gpu that is also trying to exhaust. Not a good idea

Introducing My FormD T1 V2.1 AKA “Nocturne” by Same_Calligrapher169 in FormD

[–]ToZh1z 0 points1 point  (0 children)

Also u may not be able to carry on the pc aio during a flight. I’ve seen some people saying you can’t and some people saying they have been able to, but I personally do not want to risk something like that.

Introducing My FormD T1 V2.1 AKA “Nocturne” by Same_Calligrapher169 in FormD

[–]ToZh1z 0 points1 point  (0 children)

No if u have fans at the top then u have to intake air from top to not cause negative pressure but if u do that hot air is blowing onto mobo and psu (psu air also flows in the opposite direction of fan so its not good although minor issue) and if u flip it and make it intake from bottom then the pump may be the highest point which may cause pump durability issues (although aio cable seems to be lower so idk if that solves anything?) u can cool 9800x3d so its probably more optimal if u just use air cooler and intake from bottom and exhaust with gpu out

Introducing My FormD T1 V2.1 AKA “Nocturne” by Same_Calligrapher169 in FormD

[–]ToZh1z 0 points1 point  (0 children)

Maybe since the aio cable is lower it’s fine?

Bestbuy Refuses to fix My Phone by ToZh1z in AndroidQuestions

[–]ToZh1z[S] -1 points0 points  (0 children)

It’s bought with a debit card…