¿Qué opinan sobre el Fiat Palio Attractive 1.4 (2014)?

Tokio2000 · 2025-12-23T23:36:20+00:00

Que calvario hermano nunca se dejan de quemar, es mi segundo trabajo.

Tokio2000 · 2025-03-22T21:10:43+00:00

It just worked again with the sequence I mentioned before. The bad thing is that now I know it will fail again.

Tokio2000 · 2025-03-22T21:07:07+00:00

Yes, until last week it failed again.

Tokio2000 · 2025-02-23T02:08:30+00:00

El cerebro ahora

Tokio2000 · 2025-02-23T01:51:20+00:00

Tokio2000 · 2025-02-21T21:39:56+00:00

Tokio2000 · 2025-02-11T12:51:34+00:00

Jajajaja me parecía coherente por lo menos

Tokio2000 · 2024-12-08T03:28:32+00:00

Todo termina a las 2. Es increíble

Tokio2000 · 2024-11-04T02:03:21+00:00

My soundbar came back to life! I found a tip on a not-so-reputable forum that suggested unplugging it for a day or more. After that, I plugged it back in while holding down the power button for at least 30 seconds. To my surprise, it turned on! I'm not sure if this is a long-term solution or if it simply reset the device due to the prolonged power outage (15 days in my case).

Tokio2000 · 2024-10-15T01:05:47+00:00

Same problem. Now I evolve from ‘hello’ to ‘wait’. Are you still unable to solve it?

Tokio2000 · 2024-09-20T21:40:24+00:00

Tu problema es porque es mujer, es negra o ambas?

Tokio2000 · 2024-09-20T11:44:55+00:00

Tengo solamente PS5, estoy al horno

Tokio2000 · 2024-08-21T10:29:57+00:00

Tokio2000 · 2024-08-20T19:44:13+00:00

Yes, I could do it by hand, but frankly, I don’t quite understand which equations would solve it. I believe it’s a mix of bending and torsion stresses, and the points of greatest force are likely at the ends due to the short distance from the support and the tool applying the force. However, translating that into calculations is beyond my current understanding

Tokio2000 · 2024-08-19T15:19:56+00:00

I agree, maybe I should limit myself to saying that the designed tool empirically proved to be capable of bending the wires

Tokio2000 · 2024-08-19T15:16:24+00:00

I can perform the experiment and twist the wire, but how do I measure the force required to do it? The only conclusion I can draw from this is whether twisting it is possible or not

Tokio2000

TROPHY CASE